產品結構原理
電機帶動轉鼓及同心安裝的輸料螺旋,以一定的差速同向高速旋轉,物料由進料管連續引入,均勻分布到轉鼓底段濾網壁上,在離心力作用下,液相物穿過濾網和轉鼓內形成濾渣,濾渣在離心力的錐面分力和輸料螺旋的共同作用下,連續不斷地向轉鼓大端移動排出轉鼓,經卸料槽排出機外。
Structures and Principles
A motor drives the screen-bolw without holes and the feeding scroll assembled concentric to rotate together to a higher speed at a certain differential speed.Material is fed through a feed pipe,distributed evenly on the filter screen wall of the screen-bowl bottom.Under the centrifugal force,the liquid is discharged out of the screen-bowl through filter screen and the holes of the screen-bowl wall,then out of the machine through the drainage.The solid is intercepted in the screen-bowl as cake.Acted by taper-face component of centrifugal force together with scroll conveyor,the cake moves interruptedly toward the bi end of the screen-bowl and is discharged out of the screen-bowl,and then out of the machine through a discharging tank.
[ 主要特點 ]
二、產品特點和用途 Characteristics and Uses
LWL系列離心機是一種臥式螺旋卸料、連續操作過濾離心機。能在全速運轉下,連續進料、分離、洗滌和卸料。具有結構緊湊、體積小、連續操作、運轉平穩、適應性強、處理量大、濾餅含濕率低等特點。適合分離含固相物粒度大于0.1mm,濃度范圍在10-75%的懸浮液。適用于化工、制鹽、制堿、環保等行業。
LWL Series are a kind of horizontal screen-bowl scroll discharge centrifuge that can be continuously operated.They can perfoum feeding,separating washing and discharging in sequence at their full-speed running.They have the advantages of c ompact adaptability,large capacity and low moisture content.This Series are suitable for chemical industry,salt and alkali manufacturing and environment protection.
三、技術參數及型號 TYPE AND MAIN TECHNICAL PARAMETERS
項目 型號 | 轉鼓 | 電機 | 整機重量 | 外形尺寸 | |||
大端直徑 | 過濾區長度 | zui高轉速 | zui大分離 | ||||
LWL350X300-N | 350 | 220 | 3000 | 1764 | 11 | 990 | 1241×1265×1528 |
LWL450X220-N | 450 | 300 | 2100 | 1110 | 22 | 1500 | 1600×1400×1300 |
LWL520X350-N | 520 | 350 | 1770 | 910 | 30 | 1800 | 1480×1920×1470 |
特別提示:
1、技術參數以產品說明書為準。
2、洽詢時,請顧客詳細賜告物料特性參數及工況條件要求。
3、根據顧客的特殊需要,我們可以采取個性化的設計與制造。
材料:物料接觸部分材質可分為普通不銹鋼、特殊不銹鋼或鈦合金等。
電機形式:可采用普通型或防爆型單速電機、電磁調速電機等。
調速方式:可采用皮帶輪變速、變頻調速或電磁調速。