burkert寶德定位器8793

工藝尺寸的實際值可直接作為 4 - 20 mA，Pt 100 或頻率信號傳送至設備中。通過比較額定值與實際值，工藝調節儀可計算出下級位置調節儀的內部額定值?？勺詣?dòng)完成工藝調節儀和位置調節儀的參數化。同時會自動識別受控系統的型號，并且匹配的調節器結構需與相關的理想?yún)?shù)組相一致。工藝調節儀裝配有用于監控閥門的額外診斷功能。The actual value of the process size can be transmitted directly to the device as 4-20 mA, Pt 100 or frequency signal. By comparing the ratings and actual values, the process adjuster can calculate the internal rating of the lower position regulator. The parameters of process adjustment instrument and position adjustment instrument can be completed automatically. At the same time, the model of the controlled system will be automatically recognized, and the matching regulator structure should be consistent with the relevant ideal parameter group. The process regulator is equipped with additional diagnostic functions for monitoring valves.

burkert寶德定位器8793

三元乙丙橡膠FKM

操作電壓24vdc +/- 10%剩余。10%

設置0 / 4到20 mA,0到5 /10 V

輸入電阻0/4 20 mA:180Ω0 5/10 V:19 kΩ

輸入數據為實際值信號設置4 - 20 mA頻率設置

設置Pt 100180Ω輸入電阻/ 12位分辨率

17 kΩ輸入電阻,0 - 1000hz / 1% 0。測量范圍,

輸入信號> 300 mVss信號形成正弦，矩形，三角形

測量范圍-20 - + 220ºC,分辨率< 0.1ºC,M

模擬反饋4 -20 mA,0 -20 mAV,0 - 5 V

二元輸入電流隔離，0 -5 V = log " 0 "，10 -30 V = log " 1 "

二進制輸出當前的限制輸出(可選)，電隔離

當過載時，輸出將會同步控制介質

位置檢測模塊電位計，max。角度180°

中風閥軸zui小范圍。30º轉軸,獨立的杠桿

按要求安裝，顯示在上面或側面

保護IP65和IP67 acc。EN 60529

(NEMA4x準備)功率消耗< 5 W

電氣連接Multi-pin連接

電纜密封套遠程版本M12有/ 4-pin;M8,4-pin

2 xm20x1.5(電纜Ø10毫米)螺絲終端

(0.14 - -1.5平方毫米)1 xm12x1.5(電纜Ø3到6 5毫米)

總線通信Profi總線DPV1或DeviceNet(op)

burkert寶德定位器8793

更多的寶德產品信息選型期待您與我們。