介電常數是各種電瓷、裝置瓷、電容器等陶瓷，還有復合材料等的一項重要的物理性質，通過測定介質損耗角正切tanδ及介電常數(ε)，可進一步了解影響介質損耗和介電常數的各種因素，為提高材料的性能提供依據；儀器的基本原理是采用高頻諧振法，并提供了，通用、多用途、多量程的阻抗測試。它以單片計算機作為儀器的控制，測量核心采用了頻率數字鎖定，標準頻率測試點自動設定，諧振點自動搜索，Q值量程自動轉換
一、 介電常數測試儀概述
介質損耗和介電常數是各種電瓷、裝置瓷、電容器等陶瓷，還有復合材料等的一項重要的物理性質，通過測定介質損耗角正切tanδ及介電常數（ε），可進一步了解影響介質損耗和介電常數的各種因素，為提高材料的性能提供依據；儀器的基本原理是采用高頻諧振法，并提供了，通用、多用途、多量程的阻抗測試。它以單片計算機作為儀器的控制，測量核心采用了頻率數字鎖定，標準頻率測試點自動設定，諧振點自動搜索，Q值量程自動轉換，數值顯示等新技術，改進了調諧回路，使得調諧測試回路的殘余電感減至zui低，并保留了原Q表中自動穩幅等技術，使得新儀器在使用時更為方便，測量值更為精確。儀器能在較高的測試頻率條件下，測量高頻電感或諧振回路的Q值，電感器的電感量和分布電容量，電容器的電容量和損耗角正切值，電工材料的高頻介質損耗，高頻回路有效并聯及串聯電阻，傳輸線的特性阻抗等。
介電常數介質損耗試驗儀用于科研機關、學校、工廠等單位對無機非金屬新材料性能的應用研究。
二、介電常數試驗儀的技術指標
1．Q值測量
a．Q值測量范圍：2～1023。
b．Q值量程分檔：30、100、300、1000、自動換檔或手動換檔。
c．標稱誤差
項 目
GDAT-A
頻率范圍
20kHz～10MHz；
固有誤差
≤5％±滿度值的2％；
工作誤差
≤7％±滿度值的2％；
頻率范圍
10MHz～60MHz；
固有誤差
≤6％±滿度值的2％；
工作誤差
≤8％±滿度值的2％。
2．電感測量范圍：14.5nH~8.14H
3．介電常數試驗儀電容測量：1~ 460
項 目
GDAT-A
直接測量范圍
1～460pF
主電容調節范圍
準確度
30～500pF
150pF以下±1.5pF；
150pF以上±1％
注：大于直接測量范圍的電容測量見使用規則
4．介電常數介質損耗試驗儀信號源頻率覆蓋范圍
項 目
GDAT-A
頻率范圍
10kHz～50MHz
頻率分段
（虛擬）
10～99.9999kHz
100～999.999kHz
1～9.99999MHz
10～60MHz
頻率指示誤差
3×10-5±1個字
5．Q合格指示預置功能
預置范圍：5～1000。
6．Q表正常工作條件
a. 環境溫度：0℃～+40℃；
b．相對濕度：<80％；
c．電源：220V±22V，50Hz±2.5Hz。
7．其他
a．消耗功率：約25W；
b．凈重：約7kg；
c. 外型尺寸：（l×b×h）mm：380×132×280。
8．產品配置：
a.測試主機一臺；
b.電感9只；
c.夾具一套
電感：
線圈號 測試頻率 Q值 分布電容p 電感值
9 100KHz 98 9.4 25mH
8 400KHz 138 11.4 4.87mH
7 400KHz 202 16 0.99mH
6 1MHz 196 13 252μH
5 2MHz 198 8.7 49.8μH
4 4.5MHz 231 7 10μH
3 12MHz 193 6.9 2.49μH
2 12MHz 229 6.4 0.508μH
1 25MHz，50MHz 233，211 0.9 0.125μHGDAT-A
Dielectric constant dielectric loss tester details:
One, the dielectric constant dielectric loss tester overview
Dielectric loss and dielectric constant are all kinds of porcelain, porcelain, ceramic capacitor device, and composite materials is an important physical properties, by measuring the dielectric loss tangent of dielectric constant （ Tan δ andε）, to further understand the effects of dielectric loss and dielectric constant of the various factors, in order to improve the material the property basis; instrument basic principle is the use of high frequency resonance method, and provides, universal, multi-purpose, multiple range impedance test. It uses single-chip computer as the control core of measuring instrument, using the frequency locking, frequency standard test point automatic setting, resonant point automatic search, Q value range automatic conversion, numerical display and other new technology, improved the tuning circuit, the tuning circuit for testing the residual inductance is reduced to the minimum, and retains the original Q table in the automatic amplitude stabilizer technology, makes the new instrument in the use of more convenient, measurement is more accurate. Instrument in high frequency test conditions, measurement of high frequency inductive or resonant loop of the Q value, the inductance of the inductor is the amount and distribution of capacitance, capacitance and loss angle tangent value of electrical materials, dielectric loss in high frequency, high frequency circuit in parallel and series resistance, the characteristic impedance of the transmission line and so on.
Dielectric constant dielectric loss tester used in scientific research institutions, schools, factories and other units to inorganic metalloid new material property application research.
In two, the dielectric constant dielectric loss tester technical index
1.Q measurement
A.Q measurement range: 2～ 1023.
The b.Q value range profile: 30, 100, 300, 1000, automatic or manual shift.
Nominal error C.
Item
GDAT-A
Frequency range
20kHz - 10MHz;
Intrinsic error
= 5%±full scale value 2%;
Operating error
= 7%±full scale value 2%;
Frequency range
10MHz - 60MHz;
Intrinsic error
= 6%±full scale value 2%;
Operating error
= 8%±full scale value 2%.
The 2 inductance measurement range: 14.5nH~8.14H
A 3 dielectric constant dielectric loss tester capacitance measurements: 1~ 460
Item
GDAT-A
Measuring range
1 - 460pF
The main capacitor adjustable range
Degree of accuracy
30 - 500pF
The following 150pF± 1.5pF;
150pF or + 1%
Note: larger than direct measurement range of the capacitance measurement see using rules
A 4 dielectric constant dielectric loss tester signal source frequency coverage
Item
GDAT-A
Frequency range
10kHz - 50MHz
Frequency segmentation
（ virtual ）
10 - 99.9999kHz
100 - 999.999kHz
1 - 9.99999MHz
10 - 60MHz
Frequency indication error
3 x 10-5 ±1 words
5.Q qualified instructions preset function
Preset range: 5～ 1000.
Table 6.Q the normal working conditions
A. environment temperature: 0 ℃~ +40 ℃;
Relative humidity: <80% b.;
Power supply: C. 220V± 22V, 50Hz ±2.5Hz.
7 other
A. power consumption: about 25W;
Net weight: B. about 7kg;
Size: C. （ L× B× h ）× 132 mm:380× 280.
8 product configuration:
The A. test host a;
B. inductance 9;
C. jig set
Inductance:
Coil test frequency distributions of Q values of P inductance capacitance
9 100KHz 989.4 25mH
8 400KHz 13811.4 4.87mH
7 400KHz 20216 0.99mH
6 1MHz 19613252 μ H
5 1988.7 49.8 μ H 2MHz
4 4.5MHz 231710 μ H
3 1936.9 2.49 μ H 12MHz
2 2296.4 0.508 μ H 12MHz
1 25MHz, 0.125μ H 50MHz 2332110.9
會員1.png)
