￥面議
恒天九五重工有限公司
免費會員您現在的位置： 恒天九五重工有限公司>>旋挖鉆機>> JVR280D旋挖鉆機
JVR280D旋挖鉆機
| 參考價: | 面議 |
具體成交價以合同協議為準- 產品型號
- 品牌
- 其他 廠商性質
- 所在地
訪問次數：473更新時間：2021-02-18 14:04:04
聯系我們時請說明是智能制造網上看到的信息，謝謝!
產品介紹
主卷揚布置在桅桿的下部，十分便于觀察走繩；采用雙折線繩槽卷筒，使各層之間的負荷均勻分布，大大延長了鋼絲繩的使用壽命，提高施工安全性。
Main winch located at the bottom of the drilling mast which offer good angle foe checking line’s work. Unique design in the line roll could prolong the use life of the steel line and also enhance the construction safety.
液壓系統使用*的負載反饋技術，可使流量按需分配到系統各個工作裝置，實現各種工況下的匹配，泵、馬達、閥、油管及管接頭均采用進口產品，確保高可靠性。
Hydraulic system adopts advanced load-feedback technology. Realizing hydraulic liquidity allocate to different parts according to the operation demand. Top key parts guarantee high reliability, such as pump, motor, valve, pipe and joint come from international top brands.
CAT336D底盤和上車，履帶間距在3000-4300mm之間調整，將卡特配重后移，增加配重重量，提高整機的穩定性和可靠性。
Configuring CAT336D undercarriage and up structure. The crawler could adjust between 3000mm and 4300mm. The customers could backward the counterweight and increase its weight also for improving the stability and reliability.
采用新材料加強型桅桿結構，結合合理施工工法，可強勁高效入巖。
Using new materials to enhance the mast structure, it can drill into rock efficiently by adopting a reasonable construction method.
| 機型 Model | JVR280D |
| 大輸出扭距 Max. output torque (KN.m) | 280 |
| 大鉆孔深度 Max. drilling depth (m) | 85 |
| 大鉆孔直徑 Max. drilling diameter (mm) | 2500 |
| 發動機生產廠家 Engine brand | CAT |
| 發動機型號 Engine model | C-9電噴 EFI |
| 發動機功率 Engine power (KW) | 261 |
| 主泵流量 Main pump flow rate | 2×280 L/min@1800rpm |
| 底盤型號 Undercarriage model | CAT336D |
| 牽引力 Traction force (KN) | 510 |
| 鉆孔轉速 Drilling speed (rpm) | 6 - 27 |
| 大加壓力/起拔力 Max. crowd push force (KN) | 185 / 200 |
| 加壓系統行程 Stroke of sledge (mm) | 5200 |
| 主卷揚提升力（*層）Main winch pull (1st layer) | 265 |
| 主卷揚繩直徑 Main winch wire rope dia. (mm) | Φ32 |
| 主卷揚提升速度 Max. main winch line speed (m/min) | 65 |
| 副卷揚提升力（*層）Aux. winch line pull (1st layer) (KN) | 110 |
| 副卷揚繩直徑 Aux. winch wire rope dia. (mm) | Φ20 |
| 副卷揚提升速度 Aux. winch line speed (m/min) | 70 |
| 工作狀態設備寬度/高度 Overall width in drilling position (mm) | 4300 / 23058 |
| 運輸狀態設備長度/寬度/高度 Overall L/H/W transport position (mm) | 16200 / 3000 / 3470 |
| 總重量（含鉆桿）Total weight (t) | 80 |
相關產品
-
-
￥面議 -
￥面議 -
￥面議
