具體成交價以合同協議為準
￥面議
恒天九五重工有限公司
免費會員您現在的位置： 恒天九五重工有限公司>>旋挖鉆機>> JVR280E旋挖鉆機
產品介紹
充分開發利用卡特底盤*的增壓功能，對于極限工況條件下將系統壓力提升到36MPa，從而使動力頭大扭矩和主卷揚大提升力增大，實現比其他廠家同檔位機型入巖能力更強，提升力更大；動力頭多檔控制，可滿足多種工況的需求，提高施工效率的同時也達到節能減排的目的；增加動力頭與主卷復合動作，有效提高施工效率。
Fully developing and taking advantage of turbocharged feature of Caterpillar Undercarriage which in limited conditions can increase the system pressure up to 36MPA, so that makes power head maximum torque and main winch maximum lifting capacity increased which also makes embedding and lifting ability more powerful compared with other companiessame-level drilling rig; Power head can be controlled well with multifold gears which can satisfy different construction condition, also improve construction efficiency, conserve energy and reduce emission; Increasing composite action for power head and main winch, effectively improving the efficiency of construction.
主卷后置，大滾筒單層鋼絲繩，有效提高鋼絲繩使用壽命;液壓系統增加二級緩沖（蓄能器），減小減速機和馬達的沖擊,從而提高減速和馬達使用壽命及節能環保。
Main winch installing backwards and large roller with single steel wire rope improving the wire rope service life; Hydraulic system with increased the secondary buffer(accumulator) to reduce the impact of speed reducer and motor, thus improve the service life of speed reducer and motor and also can achieve the goal of energy conservation and environmental protection.
| 機型 Model | JVR280E |
| 大輸出扭距 Max. output torque (KN.m) | 280 |
| 大鉆孔深度 Max. drilling depth (m) | 85 |
| 大鉆孔直徑 Max. drilling diameter (mm) | 2500 |
| 發動機生產廠家 Engine brand | CAT |
| 發動機型號 Engine model | C9 EFI |
| 發動機功率 Engine power (KW) | 261 |
| 主泵流量 Main pump flow rate | 2×280 L/min@1800rpm |
| 底盤型號 Undercarriage model | CAT336D |
| 牽引力 Traction force (KN) | 510 |
| 鉆孔轉速 Drilling speed (rpm) | 5 - 30 |
| 大加壓力/起拔力 Max. crowd push force (KN) | 210 / 270 |
| 加壓系統行程 Stroke of sledge (mm) | 5200 |
| 主卷揚提升力（*層）Main winch pull (1st layer) | 292 |
| 主卷揚繩直徑 Main winch wire rope dia. (mm) | Φ32 |
| 主卷揚提升速度 Max. main winch line speed (m/min) | 54 |
| 副卷揚提升力（*層）Aux. winch line pull (1st layer) (KN) | 110 |
| 副卷揚繩直徑 Aux. winch wire rope dia. (mm) | Φ20 |
| 副卷揚提升速度 Aux. winch line speed (m/min) | 70 |
| 工作狀態設備寬度/高度 Overall width in drilling position (mm) | 4300 / 23253 |
| 運輸狀態設備長度/寬度/高度 Overall L/H/W transport position (mm) | 13900 / 3000 / 3347 |
| 總重量（含鉆桿）Total weight (t) | 85 |
相關產品
-
-
￥面議 -
￥面議 -
￥面議
