This unit is the dedicated specified cable to connect the personal computer to the MITSUBISHI ELECTRIC MELSEC-PC or FUJI ELECTRIC FLEX-PC N-series
The Personal Computer side :
. IBM AT personal computer or * compatible
. MS-DOS version 3.2 or higher
. 640KB RAM
. min. 10MB Hard Disk
. RS232C Serial port
Software Package :
. MEDOC/SFC/FX-MING for MITSUBISHI ELECTRIC MELSEC-PC
. NN-FIBM [ ] for FUJI ELECTRIC FLEX-PC N-series
The Programmable Controller side :
For PC/PERSONAL COMPUTER communication,the following external equipment is required :
For MITSUBISHI ELECTRIC MELSEC-PC:
F-12, F-20, F-40, F1/ F2 and F2U ---- F2-20GF1 and SC-09
FX2 / FX2C and A series ---- SC-09
FX0 / FX0N / FX0S / FX2N ---- FX-20P-CADP and
For FUJI ELECTRIC FLEX-PC:
NB, NJ, NS... ---- CNV-3 and
General Specifications :
Cooling method : Self-cooled
Operating temperature and humidity : -15 oC to 75 oC, 20% to 95%(RH) (no condensation)
Storage temperature : -30 oC to +85 oC
Power supply : none
Weight : Approx . 150g
Cable length : 3m
Note : The FX-20P-CADP is to FX0 / FX0N / FX0S / FX2N adaptor cable.
The CNV-3 is to FUJI FLEX-PC N-series adaptor cable.