This unit is the dedicated specified cable to connect the personal computer to the MITSUBISHI ELECTRIC MELSEC-PC or FUJI ELECTRIC FLEX-PC N-series.

The Personal Computer side :

. IBM AT personal computer or * compatible

. MS-DOS version 3.2 or higher

. 640KB RAM

. min. 10MB Hard Disk

. RS232C Serial port

Software Package :

. MEDOC/SFC/FX-MING for MITSUBISHI ELECTRIC MELSEC-PC

. NN-FIBM [ ] for FUJI ELECTRIC FLEX-PC N-series

The Programmable Controller side :

For PC/PERSONAL COMPUTER communication,the following external equipment is required :

For MITSUBISHI ELECTRIC MELSEC-PC:

F-12, F-20, F-40, F1/ F2 and F2U ---- F2-20GF1 and SC-09+

FX2 / FX2C... ---- SC-09+

FX0 / FX0s / FX0n / FX2n ... ---- and FX-20P-CADP

A series ----

For FUJI ELECTRIC FLEX-PC:

NB, NJ, NS... ---- CNV-3 and

General Specifications :

Cooling method : Self-cooled

Operating temperature and humidity : -15 oC to 75 oC, 20% to 95%(RH) (no condensation)

Storage temperature : -30 oC to +85 oC

Power supply : Non-powered

Max. Speed : 110Kbps

Max. Line length : 2km(9600bps) using gauge wire

Isolated voltage: 2.5kV

Weight : Approx . 150g

Cable length : 3m

Note : The CNV-3 is SC-09/SC-08 to FUJI FLEX-PC N-series adaptor cable.