
CDT-100R,PVC,PTFE磁浮式液位變送器Magnetic Float Type Level Transmitter
Measuring range : Max. 5m ( Option : 2 or 3-parts assembly )
2-wire loop power ( DC24V & DC4-20mA)
Weather-proof enclosure IP65
2” screw or various sizes of flange mounting
PTFE, PP or PVC coating of wetted parts option
Explosion proof enclosure option
With various level controllers, various contact mode available
2-wire loop power ( DC24V & DC4-20mA)
Weather-proof enclosure IP65
2” screw or various sizes of flange mounting
PTFE, PP or PVC coating of wetted parts option
Explosion proof enclosure option
With various level controllers, various contact mode available
OPERATING PRINCIPLE
FEATURE & BENEFIT
Float ball on the surface of the liquid moves up and down
liquid level along to guide pipe. Magnet system in the float
ball operates reed switch which is proportional to the liquid
level. These reed switches connected resistor string and
resistance signal is transmitted to the converter to send 4-
20mA current signal. Siganl converter is located in the head
housing. Float ball movement is confined by the upper and
lower end stopper.
FEATURE & BENEFIT
Float ball on the surface of the liquid moves up and down
liquid level along to guide pipe. Magnet system in the float
ball operates reed switch which is proportional to the liquid
level. These reed switches connected resistor string and
resistance signal is transmitted to the converter to send 4-
20mA current signal. Siganl converter is located in the head
housing. Float ball movement is confined by the upper and
lower end stopper.
CDI Tech CDT series magnetic type level transmitter is an accurate, stand-alone,
loop-powered device, usually mounted in the top of a tank or other container.
The unit maybe calibrated in the tank where i t w i l l be used.
Simply locate the float where you want the zero, and adjust zero volume, then
move the float to the span position and adjust another span volume.
2-wire loop power ( DC24V & DC4-20mA)
Weather-proof enclosure IP65
2”screw or various sizes of flange mounting
PTFE, PP or PVC coating of wetted parts option
With various level controllers, various contact mode available
Most popular and low cost type of transmitter
Simple operating principle enable no need extra maintenance
with long life time.
Almost any fluid without viscosity can be applicable
Not affected by temperature and pressure change.
loop-powered device, usually mounted in the top of a tank or other container.
The unit maybe calibrated in the tank where i t w i l l be used.
Simply locate the float where you want the zero, and adjust zero volume, then
move the float to the span position and adjust another span volume.
2-wire loop power ( DC24V & DC4-20mA)
Weather-proof enclosure IP65
2”screw or various sizes of flange mounting
PTFE, PP or PVC coating of wetted parts option
With various level controllers, various contact mode available
Most popular and low cost type of transmitter
Simple operating principle enable no need extra maintenance
with long life time.
Almost any fluid without viscosity can be applicable
Not affected by temperature and pressure change.