雷達物位計發射功率很低的極短的微波通過天線系統發射并接收。雷達波以光速運行。運行時間可以通過電子部件被轉換成物位信號。一種特殊的時間延伸方法可以確保極短時間內穩定和精確的測量。即使存在虛假反射的時候，的微處理技術和軟件也可以準確地分析出物位回波。通過輸入容器尺寸，可以將上空距離值轉換成與物位成正比的信號。儀表可以空倉調試。在固體測量中的應用可以使用K-頻段的高頻傳感器。由于信號的聚焦效果非常好，料倉內的安裝物或倉壁的粘附物都不會影響測量。
The radar level meter emits and receives extremely short microwaves with low power through an antenna system. Radar waves travel at the speed of light. The running time can be converted into level signals through electronic components. A special time extension method can ensure stable and accurate measurements in an extremely short period of time. Even in the presence of false reflections, the latest microprocessing techniques and software can accurately analyze the level echoes. By inputting the container size, the distance value above can be converted into a signal proportional to the level of the object. The instrument can be debugged empty. The application in solid-state measurement can use high-frequency sensors in the K-band. Due to the excellent focusing effect of the signal, the installation materials inside the silo or the adhesion of the silo wall will not affect the measurement.
導波雷達物位計
Guided wave radar level meter
導波雷達物位計的微波脈沖沿著一根纜、棒或包含一根棒的同軸套管運行，接觸到被測介質后，微波脈沖被反射回來，并被電子部件接收，并分析計算其運行時間。微處理器識別物位回波，分析計算后將它轉換成物位信號給出。由于測量原理簡單，可以不帶料調整，從而節省了大量調試費用。測量纜或棒可以截短，使之更加適應現場的應用。對于蒸汽不敏感，即使在煙霧、噪音、蒸汽很強烈的情況下
The microwave pulse of the guided wave radar level meter runs along a cable, rod, or coaxial sleeve containing a rod. When it comes into contact with the measured medium, the microwave pulse is reflected back and received by electronic components, and its operating time is analyzed and calculated. The microprocessor recognizes the level echo, analyzes and calculates it, and converts it into a level signal to provide. Due to the simple measurement principle, it can be adjusted without material, thus saving a lot of debugging costs. The measuring cable or rod can be shortened to make it more suitable for on-site applications. Not sensitive to steam, even in conditions of strong smoke, noise, and steam