3050雕刻機主軸溫度過高怎么辦？

2023年07月20日 07:38:28人氣：164來源：山東墨源數控設備有限公司

自動上料攪拌車零件磨損

Wear of parts of automatic feeding mixer

減少自動上料攪拌車零件磨損時應注意的問題：

Problems needing attention in reducing wear of parts of automatic feeding mixer truck:

1.保持自動上料攪拌車設備的額定負荷

1. Maintain the rated load of automatic feeding mixer equipment

這種工程機械和設備的負荷性質和大小對設備零件的損失有重要影響。通常，機械零件的磨損會隨著負載的增加而增加。當零件上的負荷高于設計負荷時，當工作負荷較高時，其零部件的磨損將繼續增加。

The load nature and size of such construction machinery and equipment have an important impact on the loss of equipment parts. Generally, the wear of mechanical parts will increase with the increase of load. When the load on the part is higher than the design load, when the working load is higher, the wear of its parts will continue to increase.

2.及時清潔以減少機械雜質對設備的影響

2. Clean in time to reduce the impact of mechanical impurities on the equipment

機械雜質通常是指建筑機械在使用過程中產生的材料，例如灰塵，土壤和一些金屬屑，油脂污漬等。一旦這些雜質到達機器的工作表面之間，它們的危害就很大：它不僅增加了摩擦，而且還增加了燃料消耗。它將破壞潤滑膜并劃傷配合表面。

Mechanical impurities usually refer to materials produced during the use of construction machinery, such as dust, soil, some metal chips, grease stains, etc. Once these impurities reach between the working surfaces of the machine, they are very harmful: it not only increases friction, but also increases fuel consumption. It will destroy the lubricating film and scratch the mating surface.

3.防止自動上料攪拌車零件腐蝕

3. Prevent corrosion of parts of automatic feeding mixer truck

腐蝕作用在零件上，有時不容易被發現，容易被忽視，并且危害更大。雨水，空氣中的化學物質等通過機器零件的管道和縫隙滲入機器，并腐蝕零件。腐蝕零件的繼續工作也會加速機器的磨損并增加機械故障。這就要求管理人員和操作人員根據當時的天氣條件和現場條件采取合理的施工安排，以更大程度地減少化學腐蝕對機械零件的危害。

Corrosion on parts is sometimes not easy to be found, easy to be ignored and more harmful. Rainwater and chemicals in the air penetrate into the machine through the pipes and gaps of machine parts and corrode the parts. The continued operation of corroded parts will also accelerate the wear of the machine and increase mechanical failures. This requires managers and operators to take reasonable construction arrangements according to the prevailing weather conditions and site conditions, so as to reduce the harm of chemical corrosion to mechanical parts to a greater extent.

4.保持自動上料攪拌車的設備部件合理的溫度

4. Maintain the reasonable temperature of the equipment parts of the automatic feeding mixer

在工作中，每個組件的溫度都有其自己的正常范圍。溫度過高或過低都會影響零件的強度，因此一定要使用冷卻液和潤滑油控制某些零件的溫度，以使其在合理的溫度范圍內工作。

In operation, the temperature of each component has its own normal range. Too high or too low temperature will affect the strength of parts. Therefore, coolant and lubricating oil must be used to control the temperature of some parts to make them work within a reasonable temperature range.

本文由3050雕刻機為您提供，我們的網站是：/我們將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided by 3050 engraving machine. Our website is: / We will serve you with wholehearted enthusiasm. Welcome to visit!

關鍵詞：雕刻機

上一篇：1噸動力滾筒秤的優勢及應用

下一篇：木工雕刻機驅動器和水冷電機出現故障及解決方法

全年征稿/資訊合作 聯系郵箱：1271141964@qq.com

免責聲明

凡本網注明"來源：智能制造網"的所有作品，版權均屬于智能制造網，轉載請必須注明智能制造網，http://towegas.com。違反者本網將追究相關法律責任。
企業發布的公司新聞、技術文章、資料下載等內容，如涉及侵權、違規遭投訴的，一律由發布企業自行承擔責任，本網有權刪除內容并追溯責任。
本網轉載并注明自其它來源的作品，目的在于傳遞更多信息，并不代表本網贊同其觀點或證實其內容的真實性，不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時，必須保留本網注明的作品來源，并自負版權等法律責任。
如涉及作品內容、版權等問題，請?jiān)谧髌钒l(fā)表之日起一周內與本網聯系，否則視為放棄相關權利。

国产强伦姧在线观看无码,中文字幕99久久亚洲精品,国产精品乱码在线观看,色桃花亚洲天堂视频久久,日韩精品无码观看视频免费

3050雕刻機主軸溫度過高怎么辦？

免責聲明

3050雕刻機主軸溫度過高怎么辦？