PCB板高電流測試儀

一、簡介
High Density Interconnections--高密度互聯技術 HDI
HDI 板是指通過高密度微細布線和微小導通孔技術來生產制作的線路板，是 PCB 行業在 20 世紀末發展起來的一門較新的技術，與傳統 PCB 相比采用激光鉆孔技術（又稱鐳射板），鉆孔更小，線路更窄，焊盤大幅度減小，所有單位面積內可以得到更多的線路分布，高密度互連由此而來，HDI 技術的出現，適應幵推進了PCB行業的發展，同時對 PCB 板的制作和測試要求更高。
HDI board refers to the circuit board produced by high-density micro-wiring and tiny through-hole technology. It is a relatively new technology developed in the PCB industry at the end of the 20th century. Compared with traditional PCB, laser drilling technology (also known as laser board) is used to drill smaller holes, narrower lines and substantially reduced pads. More lines can be distributed within all unit area. High-density interconnection results from this, ａnd the emergence of HDI technology ADAPTS to and promotes the development of PCB industry, ａnd at the same time requires higher production and testing of PCB board.

二、HCT測試目的：
HCT Testing purposes:
HDI工藝PCB板HCT耐電流測試耐電流測試是測試印制電路板產品的孔互聯可靠性的一種測試方法，目前各大廠商需要印制板供應商導入HCT測試。耐電流測試是在特殊設計的孔鏈上施加一定的直流電流，并持續一段時間，電流在孔鏈上產生焦耳熱，熱量傳遞到孔鏈附近基材上，基材受熱膨脹產生Z方向膨脹應力導致盲孔斷裂，從而檢測出孔鏈的互聯可靠性能。
Current resistance test is a test method to test the hole interconnection reliability of printed circuit board products. At present, various manufacturers need printed board suppliers to import HCT test. Current resistance test is to apply a certain DC current to a specially designed hole chain, ａnd continue for a period of time. The current generates joule heat on the hole chain, ａnd the heat is transferred to the base material near the hole chain. When the base material is heated, the expansion stress in the Z direction leads to the fracture of the blind hole, so as to detect the reliable interconnection performance of the hole chain.

三、儀器精度以及參數：
1.直流電源供應器
1.1 輸出范圍： 0-60V、0-10A、大于600W
1.2測量精確度
1.2.1 電壓： 1% +10mV
1.2.2電流： 1% +10mA
2.溫度測試儀
2.1 分度號：熱電偶：K型
2.2 基本準確度：±0.2℃±6
2.3 測試范圍：0℃~300℃（K型）
2.4 分辨率：0.1℃
2.5 熱電偶準確度：±1.5℃
3.設備規格：
3.1 精密可編程電源供應器0-60V、0-10A、600W，RS232通信接口
3.2 K型熱電偶多通道溫度記錄儀，RS232接口
3.3 工業電腦研華610L，19寸顯示器
3.4 測試臺及測試夾具

東莞市大顯自動化儀器設備有限公司研發、生產、銷售、服務為一體的檢測設備供應商，生產實防火阻燃檢測設備、電線電纜檢測設備、塑料橡膠高分子材料，建筑材料實驗儀器、燃燒試驗機

我司有研發工程師團隊，免費上門調試安裝，到客戶端免費教機，直到客戶滿意, 本廠所有服務都是服務，請安心購買！

我們的宗旨：質量，客戶至上，您的滿意就是我們的心愿，發貨流程；木箱包裝，發貨方式電議，售后服務；保修一年，終身維修保障。