www.tsthk.com 傳真：鄭鐵曉   泰仕達(dá)工業(yè)

自動(dòng)化業(yè)代理  ROPEX

Temperature Controllers for

Heatsealing bands

RESISTRON temperature controllers are used to control the temperature of heating elements （heatsealing bands, beaded bands, cutting wires, heatsealing knives, solder straps etc.）, as required in a variety of heatsealing processes, precisely and without sensors.

The wide spectrum of device variants enables an optimum solution to be found for any heatsealing application:

All models with selectable line frequency 50 or 60Hz
Available voltage 115 VAC 230VAC, 400VAC
Available temperature range 300ºC, 500ºC

	Front panel mounted: RES415 - RES470 Standard applications, For low-cost applications secondary control and programmable functions
	Mounted on a top hat rail: RES401 - RES409 Standard applications, PROFIBUS/CAN bus interface and With separate operator terminal

RESISTRON RES 415

As all other RES controllers, this unit is used to control the temperature of heating elements （heatseal bands, beaded bands, cutting wires, etc.） by measuring the resistivity of the heating element.
Precision measurement together with high response produces perfect temperature control during the heatsealing process.

Important features:

Microprocessor technology

LC-Display （green）, 4 lines, 20 characters
alternatively:
VF-Display （blue）, 4 lines, 20 characters

Automatic zero calibration （AUTOCAL）
Automatic optimization （AUTOTUNE）
Automatic frequency adjustment
Large current and voltage range
Temperature range 300°C
Booster connection as standard
Reduced menue structure
Alarm function with fault diagnosis

Order code:

• Art. Nr. 741512 - RES-415-L-230VAC （green display）
• Art. Nr. 741513 - RES-415-L-400VAC （green display）
   
• Art. Nr. 741522 - RES-415-V-230VAC （blue display）
• Art. Nr. 741523 - RES-415-V-400VAC （blue display）
   
• Art. Nr. 800033 - Modifikation 33 - RES232 Seriel
• Art. Nr. 742012 - RES-420-L-230VAC （green display）
• Art. Nr. 742013 - RES-420-L-400VAC （green display）  
• Art. Nr. 742022 - RES-420-V-230VAC （blue display）
• Art. Nr. 742023 - RES-420-V-400VAC （blue display）
• Art. Nr. 800033 - Modifikation 33 - RES232 Seriel

RESISTRON RES 430

 

 

 

 

 

 

 

 

 

 

 

 

 

Important features:

 

 

   Microprocessor technology
 LC-Display （green）, 4 lines, 20 characters
 （multilingual）
 Automatic zero calibration （AUTOCAL）
 Automatic optimization （AUTOTUNE）
 Automatic frequency adjustment
 Secondary control
 Heatsealing band alloy and
 temperature range selectable
 Timer function, sealing
 and cooling phase adjustable
 Relay output, configurable via menu
 Cooling phase with time
 or temperature dependence
 0...10VDC analog output for ACTUAL temperature
 Serial data interface （optional）
 Weighing cell interface for monitoring
 the bar closing force
 Fault diagnosis

 

Order code:

• Art. Nr. 743002 - RES-430-L-230VAC

 

RESISTRON RES 440
 

 

 

 

Function:

 

 

 

 

 

As all other RES controllers, this unit
is used to control the temperature of
heating elements （heatseal bands,
beaded bands, cutting wires, etc.）
by measuring the

 

resistivity of the heating element.
Precision measurement together with high response produces perfect temperature control during the heatsealing process.

 

Important features:

Microprocessor technology
LC-Display （green）, 4 lines,
20 characters （multilingual） alternatively:
VF-Display （blue）, 4 lines,
20 characters （multilingual）
Automatic zero calibration （AUTOCAL）
Automatic optimization （AUTOTUNE）
Automatic frequency adjustment
Large current and voltage range
Booster connection as standard
Heatsealing band alloy
and temperature range selectable
Timer function, sealing
and cooling phase adjustable
PREHEAT function
Relay output, configurable via menu
Cooling phase with time
or temperature dependence
Temperature OK
Signal 0...10VDC analog output for ACTUAL temperature
Alarm function with fault diagnosis

Order code:

• Art. Nr. 744012 - RES-440-L-230VAC （green display）
• Art. Nr. 744013 - RES-440-L-400VAC （green display） 

• Art. Nr. 744022 - RES-440-V-230VAC （blue display）
• Art. Nr. 744023 - RES-440-V-400VAC （blue display）
• Art. Nr. 800001 - Mod.01 - Amplifier for low voltage 
• Modifikation 33 - RES232 Seriel
•  
  Order code:
  
   
   
• Art. Nr. 744512 - RES-445-L-230VAC （green display）
• Art. Nr. 744513 - RES-445-L-400VAC （green display）
•  
• Art. Nr. 744522 - RES-445-V-230VAC （blue display）
• Art. Nr. 744523 - RES-445-V-400VAC （blue display）
• Art. Nr. 800001 - Mod.01 - Amplifier for low voltage
•  
•  
• Order code: 
   
   
  Order code:
  

   
• Art. Nr. 740102 - RES-401-230VAC 
• Art. Nr. 740103 - RES-401-400VAC
   
•  
• Art. Nr. 740202 - RES-402-230VAC 
• Art. Nr. 740203 - RES-402-400VAC
•  
• Art. Nr. 740302 - RES-403-230VAC 
• Art. Nr. 740303 - RES-403-400VAC
• Art. Nr. 800001 - Mod.01 - Amplifier for low voltage
• Art. Nr. 800026 - Mod.26 - Booster
• Art. Nr. 800040 - Mod.40 - "Temperature OK" signal
•  
• Art. Nr. 740702 - RES-407-230VAC 
• Art. Nr. 740703 - RES-407-400VAC
• Art. Nr. 800026 - Mod.26 - Booster
• Voltage 115VAC - RES-445-L-115VAC （green display）
• Voltage 230VAC - RES-445-L-230VAC （green display）
• Voltage 400VAC - RES-445-L-400VAC （green display）
• Voltage 115VAC - RES-445-V-115VAC （blue display）
• Voltage 230VAC - RES-445-V-230VAC （blue display）
• Voltage 400VAC - RES-445-V-400VAC （blue display）
• Modifikation 33 - RES232 Seriel

• Art. Nr. 740602 - RES-406-230VAC 
• Art. Nr. 740603 - RES-406-400VAC
• Art. Nr. 800001 - Mod.01 - Amplifier for low voltage
   
• Art. Nr. 740902 - RES-409 - 230VAC
• Art. Nr. 740903 - RES-409 - 400VAC
• Art. Nr. 800001 - Mod.01 - Amplifier for low voltage 
•  
• Art. Nr. 740842 - RES-408-0-3 （300°C） 230VAC
• Art. Nr. 740843 - RES-408-0-3 （300°C） 400VAC
• Art. Nr. 885441 - Terminal RES408-T-408-1 
   
• Art. Nr. 884202 - 2 mts. Cable
• Art. Nr. 884205 - 5 mts. Cable
• Art. Nr. 884210 - 10 mts. Cable
• Art. Nr. 800001 - Mod.01 - Amplifier for low voltage
• Art. Nr. 800026 - Mod.26 - Booster

Design variants of ULTRA-PULSE heatsealing tools Cirus - offers a standard range of linear ULTRA-PULSE heatsealing tools in various lenghts from 200 mm to 450 mm from stock. The components are ready to install and connect , and are supplied with electrical and cooling water connections as well as tapped holes for mechanical assembly. The list below is only an excerpt from ROPEX GmbH's complete product range. ROPEX GmbH reserves the right to make technical alterations and/or improvements to all products. Linear UPT heatsealing tools in standard lengths Article Aticle no Sealing Layer width [mm] L1 [mm] L2 [mm] L3 [mm] L4 [mm] L5 [mm] L6 [mm] L7 [mm] UPT-200/2,8 60 20 00 2,8 200 223 268 275 208 150 n.v UPT-250/2,8 60 25 00 2,8 250 273 318 325 258 200 n.v UPT-300/2,8 60 30 00 2,8 300 323 368 375 308 200 n.v UPT-350/2,8 60 35 00 2,8 350 373 418 425 358 200 n.v UPT-400/2,8 60 40 00 2,8 400 423 468 475 408 200 n.v UPT-450/2,8 60 4500 2,8 450 473 518 525 458 200 100 For silicone profile width b = 4mm For silicone profile width b = 6mm     Article Aticle no L1 [mm] L2 [mm] L3 [mm] SH-200/4 64 20 04 211 150 n.v SH-250/4 64 25 04 261 200 n.v SH-300/4 64 30 04 311 200 n.v SH-350/4 64 35 04 361 200 n.v SH-400/4 64 40 04 411 200 n.v SH-450/4 64 45 04 461 200 100 Article Aticle no L1 [mm] L2 [mm] L3 [mm] SH-200/6 64 20 06 211 150 n.v SH-250/6 64 25 06 261 200 n.v SH-300/6 64 30 06 311 200 n.v SH-350/6 64 35 06 361 200 n.v SH-400/6 64 40 06 411 200 n.v SH-45064 64 45 06 461 200 100

 

Resistron accessories

ATR - ANALOG TEMPERATURE DISPLAY 300°C OR 500°C Art. Nr. 882130 0..300 C Art. Nr. 882150 0..500 C Analog temperature meter to be mounted into control panel. Zero calibration af "Z" available for temperature range of 0-300ºC and 0-500°C
DTR - DIGITAL TEMPERATURE DISPLAY 300°C OR 500°C Art. Nr. 882233 0..300 C Art. Nr. 882253 0..500 C Digital temperature meter to be mounted into control pane. Available for temperature range of 0-300ºC and 0-500°C
P3D/P5D - POTENTIOMETER TO SETPOINT ADJUSTMENT 300°C OR 500°C Art. Nr. 881103 0..300 C Art. Nr. 881105 0..500 C Digital potentiometer with dial for temperature setting. The value selected on the dial is the temperature in °C
PEX-W3 - CURRENT TRAFO Art. Nr. 885105 The supplied current transformer is an integral part of the control system. Only the original current transformer my be used.
BOOSTER - RESISTRON CONTROLLER Art. Nr. 885301 External switching amplifier, necessary for high primary currents. （continuous > 5A, pulse current > 25A）. DIN-rail mount
LINE FILTER （LF-6480） Art. Nr. 885500 Essential in order to ensure CE conformity. Optimized for the RESISTRON temperature controller Line filter, prerequisite for Ropex controller to conform with CE-Label LF-06: Operating current 6A, 480VAC LF-16: Operating current 16A, 480VAC LF-35: Operating current 35A, 480VAC Electrical connection: by soldering
MONITORING UNIT （MSW） Art. Nr. 885211 For detecting frame short-circuits on the heatsealing band. Used as an alternative to the standard PEX-W2 current transformer. Supervising fault current transformer, monitoring unit MSW-1 Reduces the danger of heatseal band overheating
DIN-ADAPTOR （HS） Art. Nr. 887001 DIN-adaptor, for panel mount units （DIN-rail TS 35） Designed to fit RES-420/440/445 controllers HS-adaptor
FLEXIBLE SOFT FRONT COVER Art. Nr. 887000 Designed to fit RES-420/440/445 controllers Flexible cover protects screen and keypad Easily cleaned Economically replaceable
HINGED GARD FRONT COVER Art. nr. 887102 Designed to fit RES-420/440/445 control units Hard cover protects screen and keypad Latch to hold closed
HINGED GARD FRONT COVER （Lock） Art. Nr. 887101 Designed to fit RES-420/440/445 controllers Hard cover protects screen and keypad Keypad lockout
Communikation-Interface CI-USB-1 Art. Nr. 885650   Interface for connecting a RESISTRON/CIRUS temperature controller with diagnostic interface （DIAG） to the PC （USB port）. Associated PC visualization software for displaying setting and configuration data, and for recording SET and ACTUAL temperatures in real time.
Serial interface RS-232 （MOD 33） Art. Nr. 884202   Isolated RS-232 interface for the temperature controller RES-420/-440/-445 and UPT/LPT-640. Output of the ACTUAL temperature （with timestamp） during the heatsealing cycle. At the end of the heatsealing cycle the configuration of the controller is transmitted.
Measurement cable UML-1 Art. Nr. 884251   Twisted measurement cable for UR-voltage measurement. Halogene and silicone free, trailing cable.
VWK Tischgeräte   Gehäuse aus elektrolytisch verzinktem Stahlblech Pulverbeschichtet, abriebfest, kratzunempfindlich, beständig gegen Wasser, Lösungsmit, Kühlmit und Hydrauliköle. Gerätehaube leicht abnehmbar. Alle Anlagen für Anschlußspannung 230 V. Mit isoliertem PE-Tank.   Leichtes Befüllen des Wassertanks von außen. Kleinkreiselpumpe （Speck）. Elektromechanisches Thermostat zur Temperaturregelung VDE-Vorschriften der Industrieanlagen. Alle Anlagen nach VDE 0113 geprüft: Isolationsprüfung, Hochspannungsprüfung, Schutzleiterübergangswiderstand. Durch und durch Qualität. Sämtliche Komponenten sind von renommierten Herslern. Denn Qualität ist unser