SST 5136-DNP-CPCI接口模塊2023年4月6日倉庫現貨
1.產 品 資 料 介 紹：
中文資料：
SST 5136-DNP-CPCI是一個具有33 MHz 32位PCI總線的設備網接口模塊
SST 5136-DNP-CPCI有20個集成電路和3個微控制器?？ㄉ嫌袃山M跳線引腳。5136 DNP PCI具有一個單晶振蕩器。在前面板上，有一個薄荷綠的方形電容器和一個淺藍色的固定線性電阻器。電路板上覆蓋著超過45個標有字母“Z"的小型表面安裝組件，SST 5136-DNP-CPCI這可能表示額外的電阻器或電容器。在5136 DNP PCI的左側，有一塊帶有灰色標準接線板的薄金屬板。母標準接線板有五個開口，每個開口上方都有一個螺絲，每個開口都有顏色編碼
SST 5136-DNP-CPCI的控制功能可以通過額外的軟件許可證進行擴展，這些軟件許可證用于模擬、虛擬控制或高級控制。模擬器控制器是一種標準控制器，它使用模擬I/O（而不是實際的硬件I/O系統）來連接控制方案和過程模型或模擬。模擬器控制器可用于基本的工廠驗收測試過程模型或高保真工廠模型。高級控制器執行具有高級功能的許可算法，如自回歸、動態矩陣、設備、吹掃、模糊邏輯、排序、可編程塊和溫度曲線。虛擬控制器是一種軟件許可功能，SST 5136-DNP-CPCI可在具有實時操作系統的基于Windows的平臺上重新創建Ovation硬件控制器。它主要用于配備非冗余虛擬控制器的Ovation仿真解決方案，以減少硬件占用空間。除了硬件I/O支持外，虛擬控制器還具有標準、模擬或高級控制器的大部分接口屬性
英文資料：
SST 5136-DNP-CPCI is a device network interface module with a 33 MHz 32-bit PCI bus
The SST 5136-DNP-CPCI has 20 integrated circuits and 3 microcontrollers. There are two sets of jumper pins on the card. The 5136 DNP PCI has a single crystal oscillator. On the front panel, there is a mint green square capacitor and a light blue fixed linear resistor. The circuit board is covered with over 45 small surface mount components marked with the letter "Z", SST 5136-DNP-CPCI, which may indicate additional resistors or capacitors. On the left side of the 5136 DNP PCI, there is a thin metal plate with a gray standard wiring board. The female standard wiring board has five openings, each with a screw above it, and each opening is color coded
The control function of SST 5136-DNP-CPCI can be extended through additional software license, which are used for simulation, virtual control or advanced control. Simulator controller is a standard controller that uses analog I/O (rather than actual hardware I/O systems) to connect control schemes and process models or simulations. Simulator controllers can be used for basic factory acceptance testing process models or high fidelity factory models. Advanced controllers execute licensed algorithms with advanced functions, such as autoregressive, dynamic matrix, device, purging, fuzzy logic, sorting, programmable blocks, and temperature curves. Virtual controller is a software licensing feature that allows SST 5136-DNP-CPCI to recreate Ovation hardware controllers on Windows based platforms with real-time operating systems. It is mainly used for Ovation simulation solutions equipped with non redundant virtual controllers to reduce hardware footprint. In addition to hardware I/O support, virtual controllers also have most of the interface properties of standard, analog, or advanced controllers
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司，轉載請附上此鏈接:
