高溫高壓溢流噴射染色機
產品用途
本機適用于化纖、化纖混紡機織物及經緯編針織物在松式繩狀高溫高壓狀態下進行染色及前后處理。也可用于棉，晴綸，毛等織物在常溫常壓或微壓下進行染色及前后處理。
適應織物克量范圍：60-600克/㎡的經緯編針織物及機織物。
產品特性
-染色張力低：配備變頻馬達之導布輥，可輔助布匹運動。
-織物松馳效果高，染色均勻：該主容器（雙夾套類型）絞盤卷和噴嘴結合，共同實現任何類型的織品或材料的平滑織品流。其外形和雙夾套結構能有效避免染色不均和磨擦印痕。
標準結構
•機器所有與染液接觸部分均采用進口高抗腐蝕不銹鋼制造
•高效不銹鋼離心泵，變頻軟起動
•可調式JTZ雙級噴嘴
•數字式轉速表配減速提升馬達，由變頻器驅動
•配備注料泵、攪拌器的大容量加料桶
•可編程人水、排水和溢流水洗
•高效換熱器及過濾器
•自動控制水位尺
•噴灑清洗裝置
•出布輥
•全不銹鋼工作平臺
•不銹鋼電柜
技術參數
- 浴比：1：4~8
- 工作溫度：140°C
- 工作壓力：0.38Mpa
- 加熱速率：20~130°C 平均5°C/分鐘（干燥飽和蒸汽壓力為0.7Mpa）
- 冷卻速率：130～80°C平均2.5°C/分鐘（冷卻水為0.3Mpa,25°C）
SVA High Temperature Rapid Dyeing Machine
Applicable Cloth Varieties:
Sprayed water flow with high pressure and flow rate up to 3KG/cm2 is useful for dyeing non-splitting and non-pilling cloth,like high count,new synthetic satin,tricot,suede cloth,peach-skin processing,Talon,Tsctel,Figured cloth,Bengaline,rib fabric,interlock fabric,poplin.fluting,crepe,mesh fabric,oxford cloth,taffeta,middy twill and curled edge cloth,woven with T 99%,T/C,CVC,T/R,N/C,N/T,N/R,R/T,CD/T/R and NC/TR,as well as union cloth interwoven and blended with various chemical fibers or long staple ,cut fibers,spraying in the proper range 0.5~1kg/cm2 can satisfy special operating requirements of resilient fabric and low-tension fabric.
Main Technical Features:
a),Extra large capacity:
1,Short investment recovery period.
2,Rduction of dyeing difference between throughs in batch production.
3,Increasing productive efficiency.
b),Flexible water flow produces smaller impact on surface of high-grade cloth to ensure cloth to be non-pilling and yarn to be non twisting.
c),Specially designed bending heads can meet the requirements of no dead corner,small tension and bath ratio.
會員1.png)
