PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
無錫飛翰機械設備有限公司
會員1.png)
無錫飛翰機械設備有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
聯系方式：鄭經理查看聯系方式
更新時間：2023-01-19 11:54:31瀏覽次數：289次
聯系我時，請告知來自 智能制造網現場環氧乙烷滅菌記錄-參數表EOSterilizationRecord-Parameter滅菌批號SterilizationLotNo
| 環氧乙烷滅菌記錄-參數表 EO Sterilization Record-Parameter | ||||||||||||||||
| 滅菌批號 Sterilization Lot No.： | 日期 Date ： | 2019/1/5 | 操作員 Operator： | wangjin | ||||||||||||
| Sterilization Phase | Start | End | Setting | Actual | Acceptable range允收范圍 | Pass/Fail | ||||||||||
| 滅菌過程 | 開始值 | 結束值 | 設定值 | 實際值 | Min 最小值 | Max 值 | 合格/不合格 | |||||||||
| 加 熱 Heating | 加熱時間 Heating time | 11:13 | 13:37 | 2 H:24 M | 6 H | PASS | ||||||||||
| 加熱溫度 Heating temperature | 25.0 | 52.1 | 50.0 | ---- | ||||||||||||
| 保 溫 Keep Warm | 保溫時間 Time dwelled | 13:37 | 14:37 | 1 H | 1 H | 40 min | 2 H | PASS | ||||||||
| 保溫溫度 Temperature dwelled | Min | 50.1 | Max | 52.1 | 50.0 | 均值 | 51.0 | 48 | 53 | PASS | ||||||
| 預真空 Prevacuum | 預真空時間 Vacuum time | 14:37 | 14:46 | 9 min | PASS | |||||||||||
| 預真空壓力 Vacuum pressure | 7.9 | -50.5 | -50.0 | -50.5 | -65 | 55 | PASS | |||||||||
| 預真空速率 Vacuum rate | kPa/min | 6.5 | 10.0 | PASS | ||||||||||||
| 測漏 Leakage Test | 保壓時間 Leakage Test time | 14:46 | 15:01 | 15 min | 15 min | 9 min | 16 min | PASS | ||||||||
| 保壓泄漏率 Leakage rate | -50.5 | -50.0 | kPa/min | 0.03 | 0.3 | PASS | ||||||||||
| 加 濕 Humidifying | 加濕時間 Humidifying time | 15:01 | 15:18 | 17 min | PASS | |||||||||||
| 濕度變化 Humidifying change | RH | 44.2 | RH | 46.6 | RH | 50.0 | 30 | 90 | PASS | |||||||
| 加濕次數 Humidifying times | 4 | 1 | 50 | PASS | ||||||||||||
| 加 藥 EO injection | 加藥時間 EO injection time | 15:18 | 15:41 | 5 min | 30 min | |||||||||||
| 加藥量 EO injected weight | kg | ---- | kg | ---- | kg | ---- | kg | ---- | 2 | 7.5 | ||||||
| EO溫度Temperature of EO gas | Min | 47.8 | Max | 49.7 | 57 | 均值 | 48.5 | 15 | 60 | |||||||
| 加藥速率 EO injection rate | kg/min | |||||||||||||||
| 滅 菌 EO Exposure | 滅菌時間 EO exposure time | 15:41 | 23:41 | 8 H | 8 H | 3 H:55 M | 10 H | PASS | ||||||||
| 滅菌溫度 EO exposure temperature | Min | 49.2 | Max | 51.9 | 50.0 | AVG | 50.9 | 45 | 55 | PASS | ||||||
| 滅菌濕度 EO exposure humidity | Min | 52.0 | Max | 64.7 | 50 | AVG | 60.4 | 30 | 90 | PASS | ||||||
| 滅菌壓力 EO exposure pressure | Min | -17.8 | Max | -11.7 | AVG | 6.1 | PASS | |||||||||
| 清 洗 Flushing | 清洗時間 Flushing time | 23:41 | 1:28 | 1 H:48 M | ||||||||||||
| 抽真空壓力 Vacuum pressure | -40.0 | Min | -40.5 | -55 | 0 | PASS | ||||||||||
| 放空壓力 Reief pressure | -3.0 | Max | -2.3 | -10 | 0 | PASS | ||||||||||
| 清洗次數 Flushing times number | 10 | 10 | 1 | 11 | PASS | |||||||||||
| 置換時間 Areation time | 10 min | 10 min | 1 min | 3 H | PASS | |||||||||||
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
