| 描述： 儀器一：200K采樣 2通道虛擬示波器 儀器二：200K采樣 2通道頻譜分析儀 儀器三：8MHz采樣16通道邏輯分析儀 儀器四：2通道記錄儀 儀器五：5 通道1MHz方波信號和脈寬調制發生器 儀器六：8-通道1MHz波形發生器 The PoScope Basic2 includes: - 1 PoScope Basic2
- 2 PoProbe60
- 1 PoProbeL2
- 1 USB cable
Using the Plug and Play USB technology, the PoScope Basic2 oscilloscope is easy to setup and use. The software is a fully featured oscilloscope, chart recorder, logic generator, logic analyser, and spectrum analyser with advanced trigering all in one easy to use package. Software in English, French, German, Italian and Spanish language. Low current consumption: 40mA. PoScope Basic2 modes: 2通道-虛擬示波器 - Sample rate: 100 Hz - 200 kHz
- Input voltage: -20 - +20 V
- ADC capacity: 10 bits
- Triggering: absolute, differential, external
- Window functions: Hamming, Hanning, Blackman, Blackman-Harris
2通道-頻譜分析儀 - Sample rate: 100 Hz - 200 kHz
- Input voltage: -20 - +20 V
- ADC capacity: 10 bits
- Triggering: absolute, differential, external
- Window functions: Hamming, Hanning, Blackman, Blackman-Harris
16通道-通道邏輯分析儀 - Sample rate: 1 KHz - 8 MHz
- Input voltage: 0 - 5V
- Triggering: edge, level, mask
- Decoding: UART, SPI, I2C and 1-Wire
2通道-記錄儀 - Marker measurements
- Option to add 99 markers with comments
- Maximum, minimum and average voltage measurement for each channel
- Waveform record within several tens of hours
5 通道方波信號和脈寬調制發生器 - Frequency: 3,91 kHz – 1 Mhz
- Duty cycle: 1- 99% f=7,8125 kHz
8-通道波形發生器 - Sample rate: 1 KHz - 1 MHz
- Memory depth: 1544 bit/channel
- Output voltage: logic 0 = 0V, logic 1 = 3.3 V
- Maximum input/output current: 10 mA
Minimum computer requirements: - Minimum resolution 1024x768@24bit
- RAM 512 MB
- Processor 1GHz
- Windows Xp, Vista, 32 bit
- free USB slot
Related products PoProbe60-100 60 MHz Oscilloscope Probe Bandwidth DC~40MHz( +/- 1dB), DC~60MHz(+/-3dB) Input R 100M Ohm Input C : at Oscilloscope Input 20pF Compensation range: 15pF-50pF MAX Input Voltage DC 2000V PoProbe60 60 MHz Oscilloscope Probe ITEM 10:1 Bandwidth: DC~40MHz( +/- 1dB), DC~60MHz(+/-3dB) Item 1:1 Bandwidth: DC~3MHz(+/-1dB), DC~6MHz(+/- 3dB) Input R 10:1 =10M Ohm = 22pF Input R 1:1 =1M Ohm (Oscillosocpe) = 180pF Input C : at Oscilloscope Input 20pF ATT Ratio : 1/10 ; 1/1 MAX Input Voltage DC 600V PoProbeL1 Length: 35 cm 16 red clips for signals A0-A7 and B0-B7 2 black clips for GND All clips marked |
會員1.png)
