国产强伦姧在线观看无码,中文字幕99久久亚洲精品,国产精品乱码在线观看,色桃花亚洲天堂视频久久,日韩精品无码观看视频免费

特點：

1、與同類磨粉機相比，在同功率的情況下產量有較大提高（增產20%-50%）。節約能耗

2、增加了集塵裝置，有效地降低了粉塵污染。

3、主風機出料降低了操作工人的勞動強度。

4、主機門蓋可開，便于檢修和diao具的更換。

5、采用風水雙冷，較好的降低了機體內的工作溫度，所研制的料不易變性，同時也有利于熱敏性塑料的磨制，可對部分PE，ABS進行磨制。

It is the latest grinder developed by our factory with features as follows

1.Compared with similar grinders ,its output is greatly improved （increase by 20-50%）under the same power .It is energy-saving.

2.The dust collector is added to effectively reduce dust pollution.

3.The discharging of the air shutter reduces labor strength of operating workers.

4.The door cover of the main machine can be opened for convenience of maintenance and replacement of knives.

5.Wind and water cooling is adopted to decrease the working temperature inside the machine body ,the grinded material uneasy for transformation and be good for grinding of heat-susceptible plastics and that part of PE and ABS can be grinded.

工作原理

1、該機工作部分為刀盤。高速粒子在撞擊齒板后部分被粉碎，經吸風抽出，而較大粒子則繼續撞擊，粉碎后被抽出。這樣減少了刀盤負荷，提高磨粉效率，又能使粉料得到均勻冷卻。

2、溫度低是該機的主要優點。按熱功當量：每小時作功后轉換為860千卡熱量。本機為外抽風。風量達50m/KW由進、出口風溫差，帶走大部分熱量。少部分熱量由水冷卻解決。要求冷水的進口溫度不大于25℃，出口水溫度不大于45℃，夏天適當增加冷卻水流，以降低溫度。

Working principles

1.The working part of this machine is cutter disc .High speed particles are grinded after impacting gears and drawn out by absorption of air while large particles remain being impacted and are drawn out after being grinded,which reduces load of the cutter disc,improves power grinding efficiency and enables the powder materials be evenly cooled.

2.Low temperature is the main advantage of this machine .In heat power:The power will be converted into 860kcals heat after the operation of each hour.This machine is external extraction fan .The wind amount reches 50m/kw and the wind temperature difference at inlet and outlet brings away most heat while little heat is handled by water cooling .The temperature at inlet of cool water is required not to exceed 25℃ and the temperature of water at outlet shall not exceed 45℃ .Cooling water flow can be appropriay added in summer to reduce temperature.

主要技術參考Main Technical  Parameter