上海霏潤機械設備有限公司
免費會員·8年
具體成交價以合同協議為準過濾除塵器上海霏潤機械設備有限公司生產的過濾除塵器是利用微孔超細纖維濾布分離氣體和微細粉塵，乃至亞微米塵埃的主要設備。適用于化工、食品、醫(yī)藥、電力、冶金、水泥等行業(yè)。按用途可分為氣力輸送系統(tǒng)用過濾除塵器和料倉頂用過濾除塵器。按結構可分為濾袋式除塵器和濾筒式除塵器，過濾材質主要有纖維、普通氈料、覆膜氈料、聚酯、芳綸、聚酯布、特氟龍、滌綸、丙綸、腈綸以及覆膜濾料。
Dust collector is designed to separate superfine particle or even sub-micron dust from process gas with micropore fiber material.It is widely applied to chemical industries,food,medicine,electric power,metallurgy and concrete industry.Dust Filter can be divided into pneumatic conveying filter and silo filter according to its use .It can be also divided into bag filter and cartridge filter according to structure.Filter material is made of fibre,common felt,felt with Tex,polyester,Nomex,polymer cloth,Teflon,terylene,Plypropylene.
產品特點Product Features：
有效過濾面積可提高2～3倍；降低壓差，提高風量；低排放，表面過濾效率成倍增加；
Effectual filter area increase 2～3 times than general. Less pressure drop;Increased air flow;Lower emissions;Double filtration efficiency.
一體式設計，安裝檢修方便，減少停產時間；縮短過濾元件，減少磨損破漏，延長使用壽命；
Monolithic construction design,easy installation,examination and repair,shorter stopproduct time,smaller filter element,less abrasion failure and longevity of service.
清灰壓力要求降低，節(jié)省能耗；
Low injection gas press,to save operating cost.
緊湊的設計，減少過濾除塵器占地面積，實現超細粉塵過濾；
Compacts structure for downsizing,be able to process superfine particle.
表面覆膜，導電浸漬聚酯，表面光滑處理可供選擇；
Filter material with tectorial membrance,electric conduction polyester dipping treatment;be able to make surface smooth if need.
耐酸堿、耐潮、防粘結。
Resistance to acid and alkali,resistance tomoisture,non-bond on filter surface.
除塵效率：99.99%，特殊要求，針對特殊要求可采用二次高效過濾除塵器；
Filter efficiency:99.99% and if need,can use two times high efficiency filters.
工作溫度：普通濾料130℃，高溫濾料204℃；
Operating temperature:Common filter material:130℃;Resistance to high temperature filter material: 204℃.
抗破綻力：25kg/C㎡；抗張力：90kg（X），102kg（Y）。
Breaking point: 25kg/C㎡;Stretching resistance: 90kg（X），102kg（Y）.
過濾除塵器采用脈沖反吹清灰、振打情灰、聲波清灰，其中脈沖反吹式過濾除塵器含脈沖控制儀、電磁閥、噴氣管、壓差儀、防護裝置、視窗等。
Back injection,mechanical shake and acoustic wave can be used in Baghouse operational.The back injection filter components:impulse controller,solenoid valve,nozzle,differential pressure meter,safeguard and sight glass ect.
我們可以根據客戶需要，按照客戶的要求進行設計。
Wide range of sizes and materials of construction as required
