PS 405/407 電源模塊- 訂貨數據
-
- 附件
-
- 產品信息
-
- 組態工具
跳轉到概述 應用 設計 技術規范 概述- 用于SIMATIC S70-400的電源
- 將交流電壓或直流電壓轉換為所需的5V和24V工作電壓
- 輸出電流:4A、10A和20A
- 此外:
- SIPLUS 電源 6AG1 405-0KA02-2AA0,溫度范圍 -25 至 +60 °C, 用于中等負載 (例如,氯/硫空氣中使用). 技術規范類似于 6ES7 405-0KA02-0AA0
- SIPLUS 電源 6AG1 407-0KA02-4AA0, 用于中等負載 (例如,氯/硫空氣中使用). 技術規范類似于 6ES7 407-0KA02-0AA0
- SIPLUS 電源 6AG1 407-0KR02-4AA0, 用于中等負載 (例如,氯/硫空氣中使用). 技術規范類似于 6ES7 407-0KR02-0AA0

應用電源通過背板總線向 S7-400 模塊提供 5V DC 和 24V DC 工作電壓。 電源可提供85到264V的交流電壓和19.2到300V的直流電壓。 每個機架需要一個電源模塊。 例外: 利用帶有電流傳輸?shù)慕涌冢?控制器中的電源模塊也向擴展單元中的所有模塊供電。 傳感器和執行器用的負載電壓必須單獨提供。 此外,還有為標準系統和故障安全型 H 系統供電的電源(冗余電源)。 
設計電源模塊插在支架的zui左側(從插槽 1 開始)。根據不同型號,它們可占用插槽1到3。電源模塊是全封閉的,通過自然對流進行冷卻。 模塊的前面包括: - LED 顯示:
LED 指示內部故障、 5 V DC和24 V DC正確輸出電壓以及正確后備電池電壓。 - 故障確認按鈕。
- 輸出電壓的通/斷開關。
- 后備電池的電池艙(電池)
- 電池監視開關。
- 電源電壓選擇開關(不適用于多種電壓范圍)。
- 電源連接。
后備電池是選件,必須另外訂購。對于電流10 A及以上的電源,建議使用兩個后備電池。 
技術規范Article number | 6ES7405-0DA02-0AA0 | 6ES7405-0KA02-0AA0 | 6ES7405-0KR02-0AA0 | 6ES7405-0RA02-0AA0 |
---|
| PS405 POWER SUPPLY, DC24/48/60V, DC5V/4A | SIMATIC S7-400, PS 405 POWER | POWERSUPP.PS405,DC24/48/60V,DC5V/10A,RED | PS405 POWER SUPPLY,DC24/48/60V,DC5V/20A |
---|
Supply voltage | | | | | Rated value (DC) | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | permissible range, lower limit (DC) | 19.2 V; Dynamic 18.5 V | 19.2 V; Dynamic 18.5 V | 19.2 V; Dynamic 18.5 V | 19.2 V; Dynamic 18.5 V | permissible range, upper limit (DC) | 72 V; dynamic 75.5 V | 72 V; dynamic 75.5 V | 72 V; dynamic 75.5 V | 72 V; dynamic 75.5 V | Mains buffering | | | | | | 20 ms | 20 ms | 20 ms | 20 ms | | Yes | Yes | Yes | Yes | Input current | | | | | Rated value at 24 V DC | 2 A | 4 A | 4 A | 7 A | Rated value at 48 V DC | 1 000 mA | 2 A | 2 A | 3.2 A | Rated value at 60 V DC | 800 mA | 1.6 A | 1.6 A | 2.5 A | Inrush current, max. | 18 A; Full width at half maximum 20 ms | 18 A; Full width at half maximum 20 ms | 18 A; Full width at half maximum 20 ms | 56 A; Full width at half maximum 1.5 ms | Output voltage | | | | | Type of output voltage | DC | DC | DC | DC | Rated value (DC) | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Output current | | | | | for backplane bus (5 V DC), max. | 4 A; no base load required | 10 A; no base load required | 10 A; no base load required | 20 A; no base load required | for backplane bus (24 V DC), max. | 0.5 A; idling-proof | 1 A; idling-proof | 1 A; idling-proof | 1 A; idling-proof | Short-circuit protection | Yes | Yes | Yes | Yes | Power | | | | | Active power input, typ. | 48 W | 95 W | 95 W | 168 W | Power loss | | | | | Power loss, typ. | 16 W | 20 W | 20 W | 44 W | Battery | | | | | Backup battery | | | | | | Yes; 1x lithium AA; 3.6 V / 2.3 Ah | Yes; 2x lithium AA; 3.6 V / 2.3 Ah | Yes; 2x lithium AA; 3.6 V / 2.3 Ah | Yes; 2x lithium AA; 3.6 V / 2.3 Ah | Hardware configuration | | | | | Slots | | | | | | 1 | 2 | 2 | 2 | Potential separation | | | | | primary/secondary | Yes | Yes | Yes | Yes | Degree and class of protection | | | | | Equipment protection class | I, with protective conductor | I, with protective conductor | I, with protective conductor | I, with protective conductor | Standards, approvals, certificates | | | | | FM approval | Yes; Ta: 0 °C to 60 °C T4 | Yes; Ta: 0 °C to 60 °C T4 | Yes; Ta: 0 °C to 60 °C T4 | Yes; Ta: 0 °C to 60 °C T4 | Ambient conditions | | | | | Ambient temperature during operation | | | | | | 0 °C | 0 °C | 0 °C | 0 °C | | 60 °C | 60 °C | 60 °C | 60 °C | Connection method | | | | | Connecting cables/cross-sections | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | Dimensions | | | | | Width | 25 mm | 50 mm | 50 mm | 50 mm | Height | 290 mm | 290 mm | 290 mm | 290 mm | Depth | 217 mm | 217 mm | 217 mm | 217 mm | Weights | | | | | Weight, approx. | 760 g | 1 200 g | 1 200 g | 1 300 g | Article number | 6ES7407-0DA02-0AA0 | 6ES7407-0KA02-0AA0 | 6ES7407-0KR02-0AA0 | 6ES7407-0RA02-0AA0 |
---|
| POWER SUPPLY PS407, 120/230V UC,5V DC/4A | PS407 POWER SUPPLY,120/230V UC,5V DC/10A | POWERSUPP.PS407,UC120/230V,DC5V/10A,RED. | PS407 POWER SUPPLY,120/230V UC,5V DC/20A |
---|
Supply voltage | | | | | Rated value (DC) | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | permissible range, lower limit (DC) | 88 V | 88 V | 88 V | 88 V | permissible range, upper limit (DC) | 300 V | 300 V | 300 V | 300 V | Rated value (AC) | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | permissible range, lower limit (AC) | 85 V | 85 V | 85 V | 85 V | permissible range, upper limit (AC) | 264 V | 264 V | 264 V | 264 V | Line frequency | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | | 47 Hz | 47 Hz | 47 Hz | 47 Hz | | 63 Hz | 63 Hz | 63 Hz | 63 Hz | Mains buffering | | | | | | 20 ms | 20 ms | 20 ms | 20 ms | | Yes | Yes | Yes | Yes | Input current | | | | | Rated value at 110 V DC | 350 mA; at 120 V DC | 1 A; at 120 V DC | 1 A; at 120 V DC | 1.4 A; at 120 V DC | Rated value at 230 V DC | 190 mA | 0.5 A | 0.5 A | 0.7 A | Rated value at 120 V AC | 0.42 A | 0.9 A | 0.9 A | 1.4 A | Rated value at 230 V AC | 0.22 A | 0.5 A | 0.5 A | 0.7 A | Inrush current, max. | 8.25 A; Full width at half maximum 5 ms | 63 A; Full width at half maximum 1 ms | 63 A; Full width at half maximum 1 ms | 88 A; Full width at half maximum 1.1 ms | Output voltage | | | | | Type of output voltage | DC | DC | DC | DC | Rated value (DC) | | | | | | Yes | Yes | Yes | Yes | | Yes | Yes | Yes | Yes | Output current | | | | | for backplane bus (5 V DC), max. | 4 A; no base load required | 10 A; no base load required | 10 A; no base load required | 20 A; no base load required | for backplane bus (24 V DC), max. | 0.5 A; idling-proof | 1 A; idling-proof | 1 A; idling-proof | 1 A; idling-proof | Short-circuit protection | Yes | Yes | Yes | Yes | Power | | | | | Active power input, typ. | 52 W | 95 W | 95 W | 158 W | Power loss | | | | | Power loss, typ. | 20 W | 20 W | 20 W | 35 W | Battery | | | | | Backup battery | | | | | | Yes; 1x lithium AA; 3.6 V / 2.2 Ah | Yes; 1x lithium AA; 3.6 V / 2.2 Ah | Yes; 1x lithium AA; 3.6 V / 2.2 Ah | Yes; 1x lithium AA; 3.6 V / 2.2 Ah | Hardware configuration | | | | | Slots | | | | | | 1 | 2 | 2 | 2 | Potential separation | | | | | primary/secondary | Yes | Yes | Yes | Yes | EMC | | | | | Compliance with line harmonic distortion limits | | | | | | Yes | Yes | Yes | Yes | Degree and class of protection | | | | | Equipment protection class | I, with protective conductor | I, with protective conductor | I, with protective conductor | I, with protective conductor | Standards, approvals, certificates | | | | | FM approval | Yes; Ta: 0 °C to 70 °C T4 | Yes; Ta: 0 °C to 70 °C T4 | Yes; Ta: 0 °C to 70 °C T4 | Yes; Ta: 0 °C to 70 °C T4 | Ambient conditions | | | | | Ambient temperature during operation | | | | | | 0 °C | 0 °C | 0 °C | 0 °C | | 60 °C | 60 °C | 60 °C | 60 °C | Connection method | | | | | Connecting cables/cross-sections | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | 3x 1.5 mm², solid or stranded wire with end sleeve, external diameter 3 mm to 9 mm | Dimensions | | | | | Width | 25 mm | 50 mm | 50 mm | 50 mm | Height | 290 mm | 290 mm | 290 mm | 290 mm | Depth | 217 mm | 217 mm | 217 mm | 217 mm | Weights | | | | | Weight, approx. | 760 g | 1 200 g | 1 200 g | 1 300 g | 
| 全部關于 PS 405/407 電源模塊 產品與解決方案在線目錄與訂購系統技術信息服務與支持與合作伙伴服務項目 
|