上海朔川電氣設備有限公司

免費會員

您現在的位置：上海朔川電氣設備有限公司>>西門子S7-400>> 西門子6ES74174XT070AB0

西門子6ES74174XT070AB0

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：220更新時間：2017-10-30 11:34:21

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

西門子S7-400

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES74174XT070AB0

產品介紹

西門子6ES74174XT070AB0 西門子6ES74174XT070AB0

6ES7417-4XT07-0AB0

SIMATIC S7-400, CPU 417-4 CENTRAL PROCESSING UNIT WITH: 32 MB WORKING MEMORY, (16 MB CODE; 16 MB DATA) 1. INTERFACE MPI 12 MBIT/S, 2. INTERFACE PROFIBUS DP, 3./4. IF IFM MODULES PLUGGABL

公司名稱：上海朔川電氣設備有限公司

聯系人：吉夢琪

：

地址：上海市金山區涇波路129號

：2840735331

信譽*，客戶*是公司成立之初所確立的宗旨，在公司的嚴格要求和員工們不折不扣地貫徹執行下發展延續至今。“假一罰十”一直是我公司的主動承諾。
承諾一：1、保證全新*

承諾二：2、保證安全準時發貨
承諾三：3、保證售后服務質量
流程一：1、客戶確認所需采購產品型號
流程二：2、我方會根據詢價單型號查詢價格以及交貨期，擬一份詳細正規報價單
流程三：3，客戶收到報價單并確認型號無誤后訂購產品
流程四：4、報價單負責人根據客戶提供型號以及數量擬份銷售合同
流程五：5、客戶收到合同查閱同意后蓋章回傳并按照合同銷售額匯款到公司開戶行
流程六：6、我公司財務查到款后，業務員安排發貨并通知客戶跟蹤運單

您隨口的一問多少錢，我就立馬放下筷子趕緊回話。

您隨口的一句有沒有現貨，我就立馬進去系統拼命地找。

您隨口問了問能優惠不？我就到處想辦法。

您很隨便，我卻很當真；您不知道我的回答，只為得到您的滿意..……

只因為我和您不止是客戶的關系，而是把您當我的朋友，在全力以赴做到我能做到的

您的選擇您的支持是我zui大的動力！ ————致我親愛的客戶（好朋友）

產品簡述：質保一年，一年內因產品質量問題免費更新產品不收取任何費用

哪里有賣要多少錢哪里有哪里能買到要在哪里買在哪里有賣的價格，參數，型號，哪家便宜，比較便宜，哪里有，銷售，訂貨號，多少錢？哪家價格好？廠家，能，優點，包裝，用途，售后服務!哪里有賣代理商總代理商

CPU 417

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

應用

設計

功能

技術規范

更多信息

概述

功能強大的 SIMATIC S7-400 CPU
可用在高能范圍中zui復雜的裝置
有 2 個 IF 模塊插槽

應用

The CPU 417-4 is the most powerful SIMATIC S7-400 CPU. The integral PROFIBUS DP interfaces permit direct connection to the PROFIBUS DP fieldbus as master or slave.

Two further DP master systems can be connected via the IF 964-DP interface submodules.

Note:
Only the interface module 6ES7 964-2AA04-0AB0 can be used.

設計

CPU 417-4 的特：

功能強大的處理器：
CPU 執行每條二進制指令時間僅為 0.018 µs。
32 MB 工作存儲器（程序和數據各 16 MB）；
快速工作存儲器用于對于執行十分重要的用戶程序部分。
可靈活擴展：
zui多 262 144 點數字量輸入/輸出和 16 384點模擬量輸入/輸出
MPI 多點接口：
通過 MPI，可方便地將zui多 32 個站聯成網絡，數據傳輸速率可高達 12 Mbit/s。該 CPU 可與通信總線 (C-bus) 和 MPI 的站之間建立zui多 44 個連接。
注意：
如果 PROFIBUS DP 接口和 MPI 接口同時運行，那么只能將以下總線連接器連接到 MPI 接口：
- 帶插口：6ES7 972-0BB42-0XA0
- 不帶插口：6ES7 972-0BA42-0XA0
模式選擇開關：
撥位開關設計。
診斷緩沖區：
zui后的 120 個故障和中斷事件保存在一個環形緩沖器中，用于進行診斷（可擴展）。
實時時鐘：
CPU 的診斷報警帶有日期和時間標記。
存儲卡：
用于擴展內置裝載存儲器。存儲在裝載存儲器中的信息包括 S7?400 參數數據以及程序，因此需要 2 倍的存儲空間。其結果是：
- 內置的裝載存儲器不能滿足大程序量的要求，因此需要存儲卡。
  可使用 RAM 和 FEPROM 卡（FEPROM 卡用于保持存儲）。
PROFIBUS DP 接口：
通過 PROFIBUS DP 主站接口，可以實現分布式自動化組態，從而提高了速度，便于使用。對用戶來說,分布式 I/O 單元可作為一個集中式單元來處理（相同的組態、編址和編程）。
混合組態：SIMATIC S5，SIMATIC S7 為 PROFIBUS 主站，符合 EN 50170 標準。
注：
當同時使用 PROFIBUS DP 和 MPI 接口時，只能將下列總線連接器連接到 MPI 接口：
- 帶插口：6ES7 972-0BB42-0XA0
- 不帶插口：6ES7 972-0BA42-0XA0
兩個附加插槽：
可用 IF 964-DP 接口子模塊連接兩個附加的 PROFIBUS DP主站系統。

功能

Block protection:
a password concept also protects the user program from unauthorized access
Integrated HMI services:
The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
Integrated communication functions:
- PG/OP communication
- Global data communication
- S7 standard communication
- S7 communication

Configurable Attributes

The STEP 7 tool "Hardware configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

Multipoint interface MPI:
- Definition of node addresses
- Startup/cycle behavior
- Stipulation of the maximum cycle time and communication load
Address allocation:
Addressing of I/O modules
Retentive area:
Definition of the number of retentive bit memories, counters, timers, data blocks, and clock memories
Size of the process image, local data
Length of the diagnostics buffer
Protection level:
Definition of access authorizations to program and data
System diagnostics:
Definition of the handling and scope of diagnostics messages
Timed interrupts:
Setting of periods
Configuring

Reporting functions

Status and fault indicators:
LEDs indicate internal and external faults and operating modes such RUN, STOP, restart, test function, etc.
Test functions:
The PG can be used to display signal states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components.
Information functions:
The PG can be used to provide the user with information about the memory capacity and operating mode of the CPU, and the current utilization of the working and load memories.

技術規范

Article number		6ES7417-4XT07-0AB0
		CPU 417-4, 32 MB, 4 INTERFACES
General information
Product type designation		CPU 417-4
Hardware product version		01
Firmware version		V7.0
Engineering with
● Programming package		STEP 7 V5.4 or higher with HSP 261
CiR – Configuration in RUN
CiR synchronization time, basic load		60 ms
CiR synchronization time, time per I/O byte		7 µs
Supply voltage
Rated value (DC)
● 24 V DC		No; Power supply via system power supply
Input current
from backplane bus 5 V DC, typ.		1.3 A
from backplane bus 5 V DC, max.		1.6 A
from backplane bus 24 V DC, max.		600 mA; 150 mA per DP interface
from interface 5 V DC, max.		90 mA; At each DP interface
Power loss
Power loss, typ.		6.5 W
Power loss, max.		8 W
Memory
Type of memory		RAM
Work memory
● integrated		32 Mbyte
● integrated (for program)		16 Mbyte
● integrated (for data)		16 Mbyte
● expandable		No
Load memory
● expandable FEPROM		Yes; with Memory Card (FLASH)
● expandable FEPROM, max.		64 Mbyte
● integrated RAM, max.		1 Mbyte
● expandable RAM		Yes; with Memory Card (RAM)
● expandable RAM, max.		64 Mbyte
Backup
● present		Yes
● with battery		Yes; all data
● without battery		No
Battery
Backup battery
● Backup current, typ.		225 µA; up to 40 °C
● Backup current, max.		1 275 µA
● Backup time, max.		See reference manual, module data, Chapter 3.3
● Feeding of external backup voltage to CPU		5 V DC to 15 V DC
CPU processing times
for bit operations, typ.		7.5 ns
for word operations, typ.		7.5 ns
for fixed point arithmetic, typ.		7.5 ns
for floating point arithmetic, typ.		15 ns
CPU-blocks
DB
● Number, max.		16 000; Number range: 1 to 16000
● Size, max.		64 kbyte
FB
● Number, max.		8 000; Number range: 0 to 7999
● Size, max.		64 kbyte
FC
● Number, max.		8 000; Number range: 0 to 7999
● Size, max.		64 kbyte
OB
● Number, max.		see instruction list
● Size, max.		64 kbyte
● Number of free cycle OBs		1; OB 1
● Number of time alarm OBs		8; OB 10-17
● Number of delay alarm OBs		4; OB 20-23
● Number of cyclic interrupt OBs		9; OB 30-38 (shortest cycle that can be set = 500 µs)
● Number of process alarm OBs		8; OB 40-47
● Number of DPV1 alarm OBs		3; OB 55-57
● Number of isochronous mode OBs		4; OB 61-64
● Number of multicomputing OBs		1; OB 60
● Number of background OBs		1; OB 90
● Number of startup OBs		3; OB 100-102
● Number of asynchronous error OBs		9; OB 80-88
● Number of synchronous error OBs		2; OB 121, 122
Nesting depth
● per priority class		24
● additional within an error OB		2
Counters, timers and their retentivity
S7 counter
● Number		2 048
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		2 047
— preset		Z 0 to Z 7
Counting range
— lower limit		0
— upper limit		999
IEC counter
● Number		Unlimited (limited only by RAM capacity)
S7 times
● Number		2 048
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		2 047
— preset		No times retentive
Time range
— lower limit		10 ms
— upper limit		9 990 s
IEC timer
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		Total working and load memory (with backup battery)
Flag
● Number, max.		16 kbyte; Size of bit memory address area
● Retentivity available		Yes
● Retentivity preset		MB 0 to MB 15
● Number of clock memories		8; in 1 memory byte
Data blocks
● Number, max.		16 000; Number range: 1 to 16000
● Size, max.		64 kbyte
Local data
● adjustable, max.		64 kbyte
● preset		32 kbyte
Address area
I/O address area
● Inputs		16 kbyte
● Outputs		16 kbyte
of which distributed
— MPI/DP interface, inputs		2 kbyte
— MPI/DP interface, outputs		2 kbyte
— DP interface, inputs		8 kbyte
— DP interface, outputs		8 kbyte
Process image
● Inputs, adjustable		16 kbyte
● Outputs, adjustable		16 kbyte
● Inputs, default		1 024 byte
● Outputs, default		1 024 byte
● consistent data, max.		244 byte
● Access to consistent data in process image		Yes
Subprocess images
● Number of subprocess images, max.		15
Digital channels
● Inputs		131 072
— of which central		131 072
● Outputs		131 072
— of which central		131 072
Analog channels
● Inputs		8 192
— of which central		8 192
● Outputs		8 192
— of which central		8 192
Hardware configuration
Number of expansion units, max.		21
connectable OPs		119
Multicomputing		Yes; 4 CPUs max. (with UR1 or UR2)
Interface modules
● Number of connectable IMs (total), max.		6
● Number of connectable IM 460s, max.		6
● Number of connectable IM 463s, max.		4; IM 463-2
Number of DP masters
● integrated		2
● via CP		10; CP 443-5 Extended
● via IM 467		4
● Mixed mode IM + CP permitted		No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode
● via interface module		2
● Number of pluggable S5 modules (via adapter capsule in central device), max.		6
Number of IO Controllers
● integrated		0
● via CP		4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode
Number of operable FMs and CPs (recommended)
● FM		Limited by number of slots and number of connections
● CP, PtP		CP 440: Limited by number of slots; CP 441: limited by number of connections
● PROFIBUS and Ethernet CPs		14; Of which 10 CPs max. or IMs as DP master, 4 PROFINET controller maximum
Slots
● required slots		2
Time of day
Clock
● Hardware clock (real-time)		Yes
● retentive and synchronizable		Yes
● Resolution		1 ms
● Deviation per day (buffered), max.		1.7 s; Power off
● Deviation per day (unbuffered), max.		8.6 s; For power On
Operating hours counter
● Number		16
● Number/Number range		0 to 15
● Range of values		SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
● Granularity		1 hour
● retentive		Yes
Clock synchronization
● supported		Yes
● to MPI, master		Yes
● to MPI, slave		Yes
● to DP, master		Yes
● to DP, slave		Yes
● in AS, master		Yes
● in AS, slave		Yes
● on Ethernet via NTP		No; Via CP
● to IF 964 DP		Yes
Time difference in system when synchronizing via
● MPI, max.		200 ms
Interfaces
Interfaces/bus type		1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 2 x PROFIBUS DP (optionally pluggable)
Number of RS 485 interfaces		2; Combined MPI / PROFIBUS DP and PROFIBUS DP
Number of other interfaces		2; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)
1. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS + MPI
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		150 mA
Number of connection resources		MPI: 44, DP: 32
Functionality
● MPI		Yes
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
MPI
● Number of connections		44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
● Transmission rate, max.		12 Mbit/s
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		Yes
— S7 basic communication		Yes
— S7 communication		Yes
— S7 communication, as client		Yes
— S7 communication, as server		Yes
DP master
● Number of connections, max.		32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
● Transmission rate, max.		12 Mbit/s
● Number of DP slaves, max.		32
Services
— PG/OP communication		Yes
— Routing		Yes; S7 routing
— Global data communication		No
— S7 basic communication		Yes
— S7 communication		Yes
— S7 communication, as client		Yes
— S7 communication, as server		Yes
— Equidistance		Yes
— Isochronous mode		Yes
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		Yes
Address area
— Inputs, max.		2 kbyte
— Outputs, max.		2 kbyte
User data per DP slave
— User data per DP slave, max.		244 byte
— Inputs, max.		244 byte
— Outputs, max.		244 byte
— Slots, max.		244
— per slot, max.		128 byte
DP slave
● Number of connections		32
● GSD file		http://support.automation.siemens.com/WW/view/en/113652
● Transmission rate, max.		12 Mbit/s
● automatic baud rate search		No
● Address area, max.		32; Virtual slots
● User data per address area, max.		32 byte
— of which consistent, max.		32 byte
Services
— PG/OP communication		Yes; with interface active
— S7 routing		Yes; with interface active
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes
— S7 communication, as client		Yes
— S7 communication, as server		Yes
— Direct data exchange (slave-to-slave communication)		No
— DPV1		No
Transfer memory
— Inputs		244 byte
— Outputs		244 byte
2. Interface
Interface type		Integrated
Physics		RS 485 / PROFIBUS
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		150 mA
Number of connection resources		32
Functionality
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
DP master
● Number of connections, max.		32
● Transmission rate, max.		12 Mbit/s
● Number of DP slaves, max.		125
Services
— PG/OP communication		Yes
— Routing		Yes; S7 routing
— Global data communication		No
— S7 basic communication		Yes
— S7 communication		Yes
— S7 communication, as client		Yes
— S7 communication, as server		Yes
— Equidistance		Yes
— Isochronous mode		Yes
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		Yes
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
User data per DP slave
— User data per DP slave, max.		244 byte
— Inputs, max.		244 byte
— Outputs, max.		244 byte
— Slots, max.		244
— per slot, max.		128 byte
DP slave
● Number of connections		32
● GSD file		http://support.automation.siemens.com/WW/view/en/113652
● Transmission rate, max.		12 Mbit/s
● Address area, max.		32
● User data per address area, max.		32 byte
— of which consistent, max.		32 byte
Services
— Routing		Yes; with interface active
Transfer memory
— Inputs		244 byte
— Outputs		244 byte
3. Interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Physics		RS 485 / PROFIBUS
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		150 mA
automatic detection of transmission rate		No
Number of connection resources		32
Functionality
● MPI		No
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
DP master
Services
— PG/OP communication		Yes
— Routing		Yes; S7 routing
— Global data communication		No
— S7 basic communication		Yes
— S7 communication		Yes
— S7 communication, as client		Yes
— S7 communication, as server		Yes
— Equidistance		Yes
— Isochronous mode		Yes
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Direct data exchange (slave-to-slave communication)		Yes
— DPV0		Yes
— DPV1		Yes
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
User data per DP slave
— User data per DP slave, max.		244 byte
— Inputs, max.		244 byte
— Outputs, max.		244 byte
— Slots, max.		244
— per slot, max.		128 byte
DP slave
● Number of connections		32
● GSD file		http://support.automation.siemens.com/WW/view/en/113652
● Transmission rate, max.		12 Mbit/s
● Address area, max.		32
● User data per address area, max.		32 byte
— of which consistent, max.		32 byte
Services
— PG/OP communication		Yes
— S7 routing		Yes; with interface active
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes
— S7 communication, as client		Yes
— S7 communication, as server		Yes
— Direct data exchange (slave-to-slave communication)		No
— DPV1		No
Transfer memory
— Inputs		244 byte
— Outputs		244 byte
4. Interface
Interface type		Pluggable interface module (IF), technical data as for 2nd interface
Plug-in interface modules		IF 964-DP (MLFB: 6ES7964-2AA04-0AB0)
Open IE communication
● ISO-on-TCP (RFC1006)		Via CP 443-1 and loadable FB
— Data length, max.		1452 bytes via CP 443-1 Adv.
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; For PROFIBUS only
Equidistance		Yes
Number of DP masters with isochronous mode		4
User data per isochronous slave, max.		244 byte
shortest clock pulse		1 ms; 0.5 ms without use of SFC 126, 127
max. cycle		32 ms
Communication functions
PG/OP communication		Yes
● Number of connectable OPs without message processing		119
● Number of connectable OPs with message processing		119; When using Alarm_S/SQ and Alarm_D/DQ
Data record routing		Yes
Global data communication
● supported		Yes
● Number of GD loops, max.		16
● Number of GD packets, transmitter, max.		16
● Number of GD packets, receiver, max.		32
● Size of GD packets, max.		54 byte
● Size of GD packet (of which consistent), max.		1 variable
S7 basic communication
● supported		Yes
● User data per job, max.		76 byte
● User data per job (of which consistent), max.		1 variable
S7 communication
● supported		Yes
● as server		Yes
● as client		Yes
● User data per job, max.		64 kbyte
● User data per job (of which consistent), max.		462 byte; 1 variable
S5 compatible communication
● supported		Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
● User data per job, max.		8 kbyte
● User data per job (of which consistent), max.		240 byte
● Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.		64/64
Standard communication (FMS)
● supported		Yes; Via CP and loadable FB
Web server
● supported		No
Number of connections
● overall		120
● usable for PG communication		119
— reserved for PG communication		1
— adjustable for PG communication, max.		0
● usable for OP communication		119
— reserved for OP communication		1
— adjustable for OP communication, max.		0
● usable for S7 basic communication		118
— reserved for S7 basic communication		0
— adjustable for S7 basic communication, max.		0
● usable for S7 communication		118
— reserved for S7 communication		0
— adjustable for S7 communication, max.		0
● usable for routing		59
— reserved for routing		0
— adjustable for routing, max.		0
S7 message functions
Number of login stations for message functions, max.		119; Max. 119 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 16 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)
Symbol-related messages		Yes
SCAN procedure		Yes
Program alarms		Yes
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Alarm 8-blocks		Yes
● Number of instances for alarm 8 and S7 communication blocks, max.		10 000
● preset, max.		1 200
Process control messages		Yes
Number of archives that can log on simultaneously (SFB 37 AR_SEND)		64
Number of messages
● overall, max.		1 024
● in 100 ms grid, max.		128
● in 500 ms grid, max.		512
● in 1000 ms grid, max.		1 024
Number of additional values
● with 100 ms grid, max.		1
● with 500, 1000 ms grid, max.		10
Test commissioning functions
Status block		Yes; Up to 16 simultaneously
Single step		Yes
Number of breakpoints		16
Status/control
● Status/control variable		Yes; Up to 16 variable tables
● Variables		Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
● Number of variables, max.		70; Status/control
Forcing
● Forcing		Yes
● Forcing, variables		Inputs, outputs, bit memories, peripheral inputs, peripheral outputs
● Number of variables, max.		512
Diagnostic buffer
● present		Yes
● Number of entries, max.		3 200
— adjustable		Yes
— preset		120
Service data
● can be read out		Yes
Standards, approvals, certificates
CE mark		Yes
CSA approval		Yes
UL approval		Yes
cULus		Yes
FM approval		Yes
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
Use in hazardous areas
● ATEX		ATEX II 3G Ex nA IIC T4 Gc
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		60 °C
Configuration
Configuration software
● STEP 7		Yes
Programming
● Command set		see instruction list
● Nesting levels		7
● Access to consistent data in process image		Yes
● System functions (SFC)		see instruction list
● System function blocks (SFB)		see instruction list
Programming language
— LAD		Yes
— FBD		Yes
— STL		Yes
— SCL		Yes
— CFC		Yes
— GRAPH		Yes
— HiGraph®		Yes
Number of simultaneously active SFCs
— DPSYC_FR		2; SFC 11; per interface
— D_ACT_DP		8; SFC 12; per interface
— RD_REC		8; SFC 59; per interface
— WR_REC		8; SFC 58; per interface
— WR_PARM		8; SFC 55; per interface
— PARM_MOD		1; SFC 57; per interface
— WR_DPARM		2; SFC 56; per interface
— DPNRM_DG		8; SFC 13; per interface
— RDSYSST		8; SFC 51
— DP_TOPOL		1; SFC 103; per interface
Number of simultaneously active SFBs
— RDREC		8; SFB 52; per interface, but not more than 32 across all external interfaces
— WRREC		8; SFB 53; per interface, but not more than 32 across all external interfaces
Know-how protection
● User program protection/password protection		Yes
● Block encryption		Yes; With S7 block Privacy
Dimensions
Width		50 mm
Height		290 mm
Depth		219 mm
Weights
Weight, approx.		900 g