上海朔川電氣設備有限公司

免費會員·9年

您現在的位置：上海朔川電氣設備有限公司>>西門子S7-300>>西門子plc、CPU\模塊>> 西門子6ES72111BE400XB0性能參數

西門子6ES72111BE400XB0性能參數

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：387更新時間：2017-10-18 14:54:37

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

西門子S7-300

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES72111BE400XB0性能參數

產品介紹

西門子6ES72111BE400XB0性能參數 西門子6ES72111BE400XB0性能參數

6ES7211-1BE40-0XB0

SIMATIC S7-1200,CPU 1211C, 緊湊型 CPU,AC/DC/繼電器, onboard I/O: 6 DI DC 24V;4 DO 繼電器 2A; 2 AI 0-10V DC, 電源:交流 85-264V AC bei 47-63Hz, 程序/數據存儲器 50 KB

公司名稱：上海朔川電氣設備有限公司
聯 系人：吉夢琪
：
地址：上海市金山區涇波路129號
：2840735331

CPU 1211C

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

設計

功能

編程

技術規范

更多信息

概述

S7 入門級控制器
可通過以下方式擴展：
- 1 個信號板 (SB)、電池板 (BB) 或通信板 (CB)
- zui多 3 個通信模塊 (CM)

設計

緊湊型 CPU 1211C 具有：

3 種設備類型，帶有不同的電源和控制電壓。
集成的電源，可作為寬范圍交流或直流電源（85 至 264 V 交流或 24 V 直流）
集成的 24 V 編碼器/負載電流源：
用于直接連接傳感器和編碼器。300 mA 輸出電流，也可用作負載電源。
14 點集成 24 V 直流數字量輸入（漏電流/源電流（IEC 1 型漏電流））。
10 點集成數字量輸出，24 V 直流或繼電器。
2 點集成模擬量輸入，0 至 10 V。
2 點脈沖輸出 (PTO)，頻率zui高 100 kHz。
脈沖寬度調制輸出 (PWM)，頻率zui高 100 kHz。
集成以太網接口（TCP/IP native、ISO-on-TCP）
3 個快速計數器 (100 kHz)，帶有可參數化的使能和復位輸入，可以同時用作帶有單獨輸入的加減計數器，或用于連接增量型編碼器。
通過附加通訊接口擴展，例如，RS485 或 RS232
通過信號板使用模擬或數字信號直接在 CPU 上擴展（保持 CPU 安裝尺寸）
通過信號模塊使用各種模擬量和數字量輸入和輸出信號擴展
可選存儲器擴展（SIMATIC 存儲卡）
PID 控制器，具有自動調諧功能
集成實時時鐘
中斷輸入：
對過程信號的上升沿或下降沿作出*速響應
所有模塊上均為可拆卸的端子
仿真器（可選）：
用于仿真集成輸入和測試用戶程序。

設備型號
型號	電源電壓	輸入電壓 DI	輸出電壓 DO	輸出電流
DC/DC/DC	24 V DC	24 V DC	24 V DC	0.5 A, 晶體管
直流/直流/繼電器	24 V DC	24 V DC	5 … 30 V DC / 5 … 250 V AC	2 A; 30 W DC / 200 W AC
交流/直流/繼電器	85 … 264 V AC	24 V DC	5 … 30 V DC / 5 … 250 V AC	2 A; 30 W DC / 200 W AC

功能

豐富的指令集:
運算種類眾多，便于編程：
- 基本操作,如二進制邏輯運算、結果賦值、存儲、計數、產生時間、裝載、傳輸、比較、移位、循環移位、產生補碼、調用子程序（帶局部變量）
- 集成通信命令（例如，USS 協議、Modbus RTU、S7 通信“T-Send/T-Receive”（T 發送/T 接收）或自由端口模式 (Freeport)）
- 使用簡便的功能，如脈沖寬度調制、脈沖序列功能、運算功能、浮點運算功能、PID 閉環控制、跳轉功能、環路功能和代碼轉換
- 數學函數，例如 SIN、COS、TAN、LN、EXP
計數:
用戶友好的計數功能配以集成的計數器和高速計數器指令給用戶開辟了新的應用領域。
中斷處理：
- 邊沿觸發中斷（由過程信號的上升沿或下降沿觸發）允許對過程中斷作出極快的響應。
- 時間觸發中斷。
- 當達到設定值或計數器方向改變時，可觸發計數器中斷。
- 通信中斷使得能迅速方便地與周圍的設備如打印機或條碼閱讀器交換信息。
口令保護
測試和診斷功能：
易于使用的功能支持測試和診斷，例如，在線/離線診斷。
在測試和診斷過程中“強制”輸入和輸出：
可不在循環周期內獨立設置輸入和輸出，例如可以檢測用戶程序。
按照 PLCopen 對簡單運動進行的運動控制。
庫功能

編程

通過 STEP 7 Basic 編程軟件包，所有 S7-1200 控制器和相關 I/O 可進行全面編程。

技術規范

Article number	6ES7211-1BE40-0XB0	6ES7211-1AE40-0XB0	6ES7211-1HE40-0XB0
	CPU 1211C, AC/DC/RELAY, 6DI/4DO/2AI	CPU 1211C, DC/DC/DC, 6DI/4DO/2AI	CPU 1211C, DC/DC/RELAY, 6DI/4DO/2AI
General information
Product type designation		CPU 1211C DC/DC/DC
Firmware version	V4.2	V4.2	V4.2
Engineering with
● Programming package	STEP 7 V14 or higher	STEP 7 V14 or higher	STEP 7 V14 or higher
Supply voltage
Rated value (DC)
● 24 V DC		Yes	Yes
permissible range, lower limit (DC)		20.4 V	20.4 V
permissible range, upper limit (DC)		28.8 V	28.8 V
Rated value (AC)
● 120 V AC	Yes
● 230 V AC	Yes
permissible range, lower limit (AC)	85 V
permissible range, upper limit (AC)	264 V
Reverse polarity protection		Yes	Yes
Line frequency
● permissible range, lower limit	47 Hz
● permissible range, upper limit	63 Hz
Load voltage L+
● Rated value (DC)		24 V	24 V
● permissible range, lower limit (DC)		20.4 V	20.4 V
● permissible range, upper limit (DC)		28.8 V	28.8 V
Input current
Current consumption (rated value)	60 mA at 120 V AC; 30 mA at 240 V AC	300 mA; CPU only	300 mA; CPU only
Current consumption, max.	180 mA at 120 V AC; 90 mA at 240 V AC	900 mA; CPU with all expansion modules	900 mA; CPU with all expansion modules
Inrush current, max.	20 A; at 264 V	12 A; at 28.8 V DC	12 A; at 28.8 V DC
I²t	0.8 A²·s	0.5 A²·s	0.8 A²·s
Output current
for backplane bus (5 V DC), max.	750 mA; Max. 5 V DC for CM	750 mA; Max. 5 V DC for CM	750 mA; Max. 5 V DC for CM
Encoder supply
24 V encoder supply
● 24 V	20.4 to 28.8V	L+ minus 4 V DC min.	L+ minus 4 V DC min.
Power loss
Power loss, typ.	10 W	8 W	8 W
Memory
Work memory
● integrated	50 kbyte	50 kbyte	50 kbyte
● expandable	No	No	No
Load memory
● integrated	1 Mbyte	1 Mbyte	1 Mbyte
● Plug-in (SIMATIC Memory Card), max.	with SIMATIC memory card	with SIMATIC memory card	with SIMATIC memory card
Backup
● present	Yes	Yes	Yes
● maintenance-free	Yes	Yes	Yes
● without battery	Yes	Yes	Yes
CPU processing times
for bit operations, typ.	0.08 µs; / instruction	0.08 µs; / instruction	0.08 µs; / instruction
for word operations, typ.	1.7 µs; / instruction	1.7 µs; / instruction	1.7 µs; / instruction
for floating point arithmetic, typ.	2.3 µs; / instruction	2.3 µs; / instruction	2.3 µs; / instruction
CPU-blocks
Number of blocks (total)	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used
OB
● Number, max.	Limited only by RAM for code	Limited only by RAM for code	Limited only by RAM for code
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	10 kbyte	10 kbyte	10 kbyte
Flag
● Number, max.	4 kbyte; Size of bit memory address area	4 kbyte; Size of bit memory address area	4 kbyte; Size of bit memory address area
Local data
● per priority class, max.	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB
Process image
● Inputs, adjustable	1 kbyte	1 kbyte	1 kbyte
● Outputs, adjustable	1 kbyte	1 kbyte	1 kbyte
Hardware configuration
Number of modules per system, max.	3 communication modules, 1 signal board	3 communication modules, 1 signal board	3 communication modules, 1 signal board
Time of day
Clock
● Hardware clock (real-time)	Yes	Yes	Yes
● Backup time	480 h; Typical	480 h; Typical	480 h; Typical
● Deviation per day, max.	±60 s/month at 25 °C	±60 s/month at 25 °C	±60 s/month at 25 °C
Digital inputs
Number of digital inputs	6; Integrated	6; Integrated	6; Integrated
● of which inputs usable for technological functions	3; HSC (High Speed Counting)	3; HSC (High Speed Counting)	3; HSC (High Speed Counting)
Source/sink input	Yes	Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max.	6	6	6
Input voltage
● Rated value (DC)	24 V	24 V	24 V
● for signal "0"	5 V DC at 1 mA	5 V DC at 1 mA	5 V DC at 1 mA
● for signal "1"	15 V DC at 2.5 mA	15 V DC at 2.5 mA	15 V DC at 2.5 mA
Input current
● for signal "1", typ.	4 mA; nominal	4 mA; nominal	4 mA; nominal
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	0.1 / 0.2 / 0.4 / 0.8 / 1.6 / 3.2 / 6.4 / 10.0 / 12.8 / 20.0 μs; 0.05 / 0.1 / 0.2 / 0.4 / 0.8 / 1.6 / 3.2 / 6.4 / 10.0 / 12.8 / 20.0 ms	0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
— at "0" to "1", min.	0.2 ms	0.2 ms	0.2 ms
— at "0" to "1", max.	12.8 ms	12.8 ms	12.8 ms
for interrupt inputs
— parameterizable	Yes	Yes	Yes
for counter/technological functions
— parameterizable	Single phase : 3 @ 100 kHz, differential: 3 @ 80 kHz	Single phase : 3 @ 100 kHz, differential: 3 @ 80 kHz	Single phase : 3 @ 100 kHz, differential: 3 @ 80 kHz
Cable length
● shielded, max.	500 m; 50 m for technological functions	500 m; 50 m for technological functions	500 m; 50 m for technological functions
● unshielded, max.	300 m; For technological functions: No	300 m; For technological functions: No	300 m; For technological functions: No
Digital outputs
Number of digital outputs	4; Relays	4	4; Relays
● of which high-speed outputs		4; 100 kHz Pulse Train Output
Limitation of inductive shutdown voltage to		L+ (-48 V)
Switching capacity of the outputs
● with resistive load, max.	2 A	0.5 A	2 A
● on lamp load, max.	30 W with DC, 200 W with AC	5 W	30 W with DC, 200 W with AC
Output voltage
● for signal "0", max.		0.1 V; with 10 kOhm load
● for signal "1", min.		20 V
Output current
● for signal "1" rated value		0.5 A
● for signal "0" residual current, max.		0.1 mA
Output delay with resistive load
● "0" to "1", max.	10 ms; max.	1 µs	10 ms; max.
● "1" to "0", max.	10 ms; max.	5 µs	10 ms; max.
Switching frequency
● of the pulse outputs, with resistive load, max.		100 kHz
Relay outputs
● Number of operating cycles, max.	mechanically 10 million, at rated load voltage 100 000		mechanically 10 million, at rated load voltage 100 000
Cable length
● shielded, max.	500 m	500 m	500 m
● unshielded, max.	150 m	150 m	150 m
Analog inputs
Number of analog inputs	2	2	2
Input ranges
● Voltage	Yes	Yes	Yes
Input ranges (rated values), voltages
● 0 to +10 V	Yes	Yes	Yes
● Input resistance (0 to 10 V)	≥100k ohms	≥100k ohms	≥100k ohms
Cable length
● shielded, max.	100 m; twisted and shielded	100 m; twisted and shielded	100 m; twisted and shielded
Analog outputs
Number of analog outputs	0	0	0
Analog value generation for the inputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	10 bit	10 bit	10 bit
● Integration time, parameterizable	Yes	Yes	Yes
● Conversion time (per channel)	625 µs	625 µs	625 µs
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes
1. Interface
Interface type	PROFINET	PROFINET	PROFINET
Physics	Ethernet	Ethernet	Ethernet
Isolated	Yes	Yes	Yes
automatic detection of transmission rate	Yes	Yes	Yes
Autonegotiation	Yes	Yes	Yes
Autocrossing	Yes	Yes	Yes
Interface types
● Number of ports	1	1	1
● integrated switch	No	No	No
Functionality
● PROFINET IO Controller	Yes	Yes	Yes
● PROFINET IO Device	Yes	Yes	Yes
● SIMATIC communication	Yes	Yes	Yes
● Open IE communication	Yes	Yes	Yes
● Web server	Yes	Yes	Yes
● Media redundancy	No	No	No
PROFINET IO Controller
● Transmission rate, max.	100 Mbit/s	100 Mbit/s	100 Mbit/s
Services
— PG/OP communication	Yes	Yes	Yes
— S7 routing	Yes	Yes	Yes
— Isochronous mode	No	No	No
— Open IE communication	Yes	Yes	Yes
— IRT	No	No	No
— MRP	No	No	No
— MRPD	No	No	No
— PROFIenergy	No	No	No
— Prioritized startup	Yes	Yes	Yes
— Number of IO devices with prioritized startup, max.	16	16	16
— Number of connectable IO Devices, max.	16	16	16
— Number of connectable IO Devices for RT, max.	16	16	16
— of which in line, max.	16	16	16
— Activation/deactivation of IO Devices	Yes	Yes	Yes
— Number of IO Devices that can be simultaneously activated/deactivated, max.	8	8	8
— Updating time	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.
PROFINET IO Device
Services
— PG/OP communication	Yes	Yes	Yes
— S7 routing	Yes	Yes	Yes
— Isochronous mode	No	No	No
— Open IE communication	Yes	Yes	Yes
— IRT	No	No	No
— MRP	No	No	No
— MRPD	No	No	No
— PROFIenergy	Yes	Yes	Yes
— Shared device	Yes	Yes	Yes
— Number of IO Controllers with shared device, max.	2	2	2
Protocols
Supports protocol for PROFINET IO	Yes	Yes	Yes
PROFIBUS	Yes; CM 1243-5 required	Yes; CM 1243-5 required	Yes; CM 1243-5 required
AS-Interface	Yes; CM 1243-2 required	Yes; CM 1243-2 required	Yes; CM 1243-2 required
Protocols (Ethernet)
● TCP/IP	Yes	Yes	Yes
● DHCP	No	No	No
● SNMP	Yes	Yes	Yes
● DCP	Yes	Yes	Yes
● LLDP	Yes	Yes	Yes
Open IE communication
● TCP/IP
— Data length, max.	8 kbyte	8 kbyte	8 kbyte
— several passive connections per port, supported	Yes	Yes	Yes
● ISO-on-TCP (RFC1006)	Yes	Yes	Yes
— Data length, max.	8 kbyte	8 kbyte	8 kbyte
● UDP
— Data length, max.	1 472 byte	1 472 byte	1 472 byte
Further protocols
● MODBUS	Yes	Yes	Yes
Communication functions
S7 communication
● supported	Yes	Yes	Yes
● as server	Yes	Yes	Yes
● as client	Yes	Yes	Yes
● User data per job, max.	See online help (S7 communication, user data size)	See online help (S7 communication, user data size)	See online help (S7 communication, user data size)
Open IE communication
● TCP/IP	Yes	Yes	Yes
● UDP	Yes	Yes	Yes
Web server
● supported	Yes	Yes	Yes
● User-defined websites	Yes	Yes	Yes
Number of connections
● overall	16; dynamically	16; dynamically	16; dynamically
Test commissioning functions
Status/control
● Status/control variable	Yes	Yes	Yes
● Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Forcing
● Forcing	Yes	Yes	Yes
Diagnostic buffer
● present	Yes	Yes	Yes
Traces
● Number of configurable Traces	2	2	2
● Memory size per trace, max.	512 kbyte	512 kbyte	512 kbyte
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED	Yes	Yes	Yes
● ERROR LED	Yes	Yes	Yes
● MAINT LED	Yes	Yes	Yes
Integrated Functions
Number of counters	3	6	3
Counting frequency (counter) max.	100 kHz	100 kHz	100 kHz
Frequency meter	Yes	Yes	Yes
controlled positioning	Yes	Yes	Yes
Number of position-controlled positioning axes, max.	8	8	8
Number of positioning axes via pulse-direction interface	Up to 4 with SB 1222	4; With integrated outputs	Up to 4 with SB 1222
PID controller	Yes	Yes	Yes
Number of alarm inputs	4	4	4
Number of pulse outputs		4
Limit frequency (pulse)		100 kHz
Potential separation
Potential separation digital inputs
● Potential separation digital inputs	500V AC for 1 minute	No	500V AC for 1 minute
● between the channels, in groups of	1	1	1
Potential separation digital outputs
● Potential separation digital outputs	Relays	Yes	Relays
● between the channels	No	No	No
● between the channels, in groups of	1	1	1
EMC
Interference immunity against discharge of static electricity
● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2	Yes	Yes	Yes
— Test voltage at air discharge	8 kV	8 kV	8 kV
— Test voltage at contact discharge	6 kV	6 kV	6 kV
Interference immunity to cable-borne interference
● Interference immunity on supply lines acc. to IEC 61000-4-4	Yes	Yes	Yes
● Interference immunity on signal cables acc. to IEC 61000-4-4	Yes	Yes	Yes
Interference immunity against voltage surge
● on the supply lines acc. to IEC 61000-4-5	Yes	Yes	Yes
Interference immunity against conducted variable disturbance induced by high-frequency fields
● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6	Yes	Yes	Yes
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas	Yes; Group 1	Yes; Group 1	Yes; Group 1
● Limit class B, for use in residential areas	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
UL approval	Yes	Yes	Yes
cULus	Yes	Yes	Yes
FM approval	Yes	Yes	Yes
RCM (formerly C-TICK)	Yes	Yes	Yes
KC approval	Yes	Yes	Yes
Marine approval	Yes	Yes	Yes
Ambient conditions
Free fall
● Fall height, max.	0.3 m; five times, in product package	0.3 m; five times, in product package	0.3 m; five times, in product package
Ambient temperature during operation
● min.	-20 °C	-20 °C	-20 °C
● max.	60 °C	60 °C	60 °C
● horizontal installation, min.	-20 °C	-20 °C	-20 °C
● horizontal installation, max.	60 °C	60 °C	60 °C
● vertical installation, min.	-20 °C	-20 °C	-20 °C
● vertical installation, max.	50 °C	50 °C	50 °C
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C	-40 °C
● max.	70 °C	70 °C	70 °C
Air pressure acc. to IEC 60068-2-13
● Operation, min.	795 hPa	795 hPa	795 hPa
● Operation, max.	1 080 hPa	1 080 hPa	1 080 hPa
● Storage/transport, min.	660 hPa	660 hPa	660 hPa
● Storage/transport, max.	1 080 hPa	1 080 hPa	1 080 hPa
● permissible operating height	-1000 to 2000 m	-1000 to 2000 m	-1000 to 2000 m
Relative humidity
● Operation, max.	95 %; no condensation	95 %; no condensation	95 %; no condensation
Vibrations
● Vibrations	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail
● Operation, tested according to IEC 60068-2-6	Yes	Yes	Yes
Shock test
● tested according to IEC 60068-2-27	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms
Pollutant concentrations
● SO2 at RH < 60% without condensation	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
Programming
Programming language
— LAD	Yes	Yes	Yes
— FBD	Yes	Yes	Yes
— SCL	Yes	Yes	Yes
Know-how protection
● User program protection/password protection	Yes	Yes	Yes
● Copy protection	Yes	Yes	Yes
● Block protection	Yes	Yes	Yes
Access protection
● Protection level: Write protection	Yes	Yes	Yes
● Protection level: Read/write protection	Yes	Yes	Yes
● Protection level: Complete protection	Yes	Yes	Yes
Cycle time monitoring
● adjustable	Yes	Yes	Yes
Dimensions
Width	90 mm	90 mm	90 mm
Height	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm
Weights
Weight, approx.	420 g	370 g	380 g

CPU 1211C

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

設計

功能

編程

技術規范

更多信息

概述

S7 入門級控制器
可通過以下方式擴展：
- 1 個信號板 (SB)、電池板 (BB) 或通信板 (CB)
- zui多 3 個通信模塊 (CM)

設計

緊湊型 CPU 1211C 具有：

3 種設備類型，帶有不同的電源和控制電壓。
集成的電源，可作為寬范圍交流或直流電源（85 至 264 V 交流或 24 V 直流）
集成的 24 V 編碼器/負載電流源：
用于直接連接傳感器和編碼器。300 mA 輸出電流，也可用作負載電源。
14 點集成 24 V 直流數字量輸入（漏電流/源電流（IEC 1 型漏電流））。
10 點集成數字量輸出，24 V 直流或繼電器。
2 點集成模擬量輸入，0 至 10 V。
2 點脈沖輸出 (PTO)，頻率zui高 100 kHz。
脈沖寬度調制輸出 (PWM)，頻率zui高 100 kHz。
集成以太網接口（TCP/IP native、ISO-on-TCP）
3 個快速計數器 (100 kHz)，帶有可參數化的使能和復位輸入，可以同時用作帶有單獨輸入的加減計數器，或用于連接增量型編碼器。
通過附加通訊接口擴展，例如，RS485 或 RS232
通過信號板使用模擬或數字信號直接在 CPU 上擴展（保持 CPU 安裝尺寸）
通過信號模塊使用各種模擬量和數字量輸入和輸出信號擴展
可選存儲器擴展（SIMATIC 存儲卡）
PID 控制器，具有自動調諧功能
集成實時時鐘
中斷輸入：
對過程信號的上升沿或下降沿作出*速響應
所有模塊上均為可拆卸的端子
仿真器（可選）：
用于仿真集成輸入和測試用戶程序。

設備型號
型號	電源電壓	輸入電壓 DI	輸出電壓 DO	輸出電流
DC/DC/DC	24 V DC	24 V DC	24 V DC	0.5 A, 晶體管
直流/直流/繼電器	24 V DC	24 V DC	5 … 30 V DC / 5 … 250 V AC	2 A; 30 W DC / 200 W AC
交流/直流/繼電器	85 … 264 V AC	24 V DC	5 … 30 V DC / 5 … 250 V AC	2 A; 30 W DC / 200 W AC

功能

豐富的指令集:
運算種類眾多，便于編程：
- 基本操作,如二進制邏輯運算、結果賦值、存儲、計數、產生時間、裝載、傳輸、比較、移位、循環移位、產生補碼、調用子程序（帶局部變量）
- 集成通信命令（例如，USS 協議、Modbus RTU、S7 通信“T-Send/T-Receive”（T 發送/T 接收）或自由端口模式 (Freeport)）
- 使用簡便的功能，如脈沖寬度調制、脈沖序列功能、運算功能、浮點運算功能、PID 閉環控制、跳轉功能、環路功能和代碼轉換
- 數學函數，例如 SIN、COS、TAN、LN、EXP
計數:
用戶友好的計數功能配以集成的計數器和高速計數器指令給用戶開辟了新的應用領域。
中斷處理：
- 邊沿觸發中斷（由過程信號的上升沿或下降沿觸發）允許對過程中斷作出極快的響應。
- 時間觸發中斷。
- 當達到設定值或計數器方向改變時，可觸發計數器中斷。
- 通信中斷使得能迅速方便地與周圍的設備如打印機或條碼閱讀器交換信息。
口令保護
測試和診斷功能：
易于使用的功能支持測試和診斷，例如，在線/離線診斷。
在測試和診斷過程中“強制”輸入和輸出：
可不在循環周期內獨立設置輸入和輸出，例如可以檢測用戶程序。
按照 PLCopen 對簡單運動進行的運動控制。
庫功能

編程

通過 STEP 7 Basic 編程軟件包，所有 S7-1200 控制器和相關 I/O 可進行全面編程。

技術規范

Article number	6ES7211-1BE40-0XB0	6ES7211-1AE40-0XB0	6ES7211-1HE40-0XB0
	CPU 1211C, AC/DC/RELAY, 6DI/4DO/2AI	CPU 1211C, DC/DC/DC, 6DI/4DO/2AI	CPU 1211C, DC/DC/RELAY, 6DI/4DO/2AI
General information
Product type designation		CPU 1211C DC/DC/DC
Firmware version	V4.2	V4.2	V4.2
Engineering with
● Programming package	STEP 7 V14 or higher	STEP 7 V14 or higher	STEP 7 V14 or higher
Supply voltage
Rated value (DC)
● 24 V DC		Yes	Yes
permissible range, lower limit (DC)		20.4 V	20.4 V
permissible range, upper limit (DC)		28.8 V	28.8 V
Rated value (AC)
● 120 V AC	Yes
● 230 V AC	Yes
permissible range, lower limit (AC)	85 V
permissible range, upper limit (AC)	264 V
Reverse polarity protection		Yes	Yes
Line frequency
● permissible range, lower limit	47 Hz
● permissible range, upper limit	63 Hz
Load voltage L+
● Rated value (DC)		24 V	24 V
● permissible range, lower limit (DC)		20.4 V	20.4 V
● permissible range, upper limit (DC)		28.8 V	28.8 V
Input current
Current consumption (rated value)	60 mA at 120 V AC; 30 mA at 240 V AC	300 mA; CPU only	300 mA; CPU only
Current consumption, max.	180 mA at 120 V AC; 90 mA at 240 V AC	900 mA; CPU with all expansion modules	900 mA; CPU with all expansion modules
Inrush current, max.	20 A; at 264 V	12 A; at 28.8 V DC	12 A; at 28.8 V DC
I²t	0.8 A²·s	0.5 A²·s	0.8 A²·s
Output current
for backplane bus (5 V DC), max.	750 mA; Max. 5 V DC for CM	750 mA; Max. 5 V DC for CM	750 mA; Max. 5 V DC for CM
Encoder supply
24 V encoder supply
● 24 V	20.4 to 28.8V	L+ minus 4 V DC min.	L+ minus 4 V DC min.
Power loss
Power loss, typ.	10 W	8 W	8 W
Memory
Work memory
● integrated	50 kbyte	50 kbyte	50 kbyte
● expandable	No	No	No
Load memory
● integrated	1 Mbyte	1 Mbyte	1 Mbyte
● Plug-in (SIMATIC Memory Card), max.	with SIMATIC memory card	with SIMATIC memory card	with SIMATIC memory card
Backup
● present	Yes	Yes	Yes
● maintenance-free	Yes	Yes	Yes
● without battery	Yes	Yes	Yes
CPU processing times
for bit operations, typ.	0.08 µs; / instruction	0.08 µs; / instruction	0.08 µs; / instruction
for word operations, typ.	1.7 µs; / instruction	1.7 µs; / instruction	1.7 µs; / instruction
for floating point arithmetic, typ.	2.3 µs; / instruction	2.3 µs; / instruction	2.3 µs; / instruction
CPU-blocks
Number of blocks (total)	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used	DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used
OB
● Number, max.	Limited only by RAM for code	Limited only by RAM for code	Limited only by RAM for code
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	10 kbyte	10 kbyte	10 kbyte
Flag
● Number, max.	4 kbyte; Size of bit memory address area	4 kbyte; Size of bit memory address area	4 kbyte; Size of bit memory address area
Local data
● per priority class, max.	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB	16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB
Process image
● Inputs, adjustable	1 kbyte	1 kbyte	1 kbyte
● Outputs, adjustable	1 kbyte	1 kbyte	1 kbyte
Hardware configuration
Number of modules per system, max.	3 communication modules, 1 signal board	3 communication modules, 1 signal board	3 communication modules, 1 signal board
Time of day
Clock
● Hardware clock (real-time)	Yes	Yes	Yes
● Backup time	480 h; Typical	480 h; Typical	480 h; Typical
● Deviation per day, max.	±60 s/month at 25 °C	±60 s/month at 25 °C	±60 s/month at 25 °C
Digital inputs
Number of digital inputs	6; Integrated	6; Integrated	6; Integrated
● of which inputs usable for technological functions	3; HSC (High Speed Counting)	3; HSC (High Speed Counting)	3; HSC (High Speed Counting)
Source/sink input	Yes	Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max.	6	6	6
Input voltage
● Rated value (DC)	24 V	24 V	24 V
● for signal "0"	5 V DC at 1 mA	5 V DC at 1 mA	5 V DC at 1 mA
● for signal "1"	15 V DC at 2.5 mA	15 V DC at 2.5 mA	15 V DC at 2.5 mA
Input current
● for signal "1", typ.	4 mA; nominal	4 mA; nominal	4 mA; nominal
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	0.1 / 0.2 / 0.4 / 0.8 / 1.6 / 3.2 / 6.4 / 10.0 / 12.8 / 20.0 μs; 0.05 / 0.1 / 0.2 / 0.4 / 0.8 / 1.6 / 3.2 / 6.4 / 10.0 / 12.8 / 20.0 ms	0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
— at "0" to "1", min.	0.2 ms	0.2 ms	0.2 ms
— at "0" to "1", max.	12.8 ms	12.8 ms	12.8 ms
for interrupt inputs
— parameterizable	Yes	Yes	Yes
for counter/technological functions
— parameterizable	Single phase : 3 @ 100 kHz, differential: 3 @ 80 kHz	Single phase : 3 @ 100 kHz, differential: 3 @ 80 kHz	Single phase : 3 @ 100 kHz, differential: 3 @ 80 kHz
Cable length
● shielded, max.	500 m; 50 m for technological functions	500 m; 50 m for technological functions	500 m; 50 m for technological functions
● unshielded, max.	300 m; For technological functions: No	300 m; For technological functions: No	300 m; For technological functions: No
Digital outputs
Number of digital outputs	4; Relays	4	4; Relays
● of which high-speed outputs		4; 100 kHz Pulse Train Output
Limitation of inductive shutdown voltage to		L+ (-48 V)
Switching capacity of the outputs
● with resistive load, max.	2 A	0.5 A	2 A
● on lamp load, max.	30 W with DC, 200 W with AC	5 W	30 W with DC, 200 W with AC
Output voltage
● for signal "0", max.		0.1 V; with 10 kOhm load
● for signal "1", min.		20 V
Output current
● for signal "1" rated value		0.5 A
● for signal "0" residual current, max.		0.1 mA
Output delay with resistive load
● "0" to "1", max.	10 ms; max.	1 µs	10 ms; max.
● "1" to "0", max.	10 ms; max.	5 µs	10 ms; max.
Switching frequency
● of the pulse outputs, with resistive load, max.		100 kHz
Relay outputs
● Number of operating cycles, max.	mechanically 10 million, at rated load voltage 100 000		mechanically 10 million, at rated load voltage 100 000
Cable length
● shielded, max.	500 m	500 m	500 m
● unshielded, max.	150 m	150 m	150 m
Analog inputs
Number of analog inputs	2	2	2
Input ranges
● Voltage	Yes	Yes	Yes
Input ranges (rated values), voltages
● 0 to +10 V	Yes	Yes	Yes
● Input resistance (0 to 10 V)	≥100k ohms	≥100k ohms	≥100k ohms
Cable length
● shielded, max.	100 m; twisted and shielded	100 m; twisted and shielded	100 m; twisted and shielded
Analog outputs
Number of analog outputs	0	0	0
Analog value generation for the inputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	10 bit	10 bit	10 bit
● Integration time, parameterizable	Yes	Yes	Yes
● Conversion time (per channel)	625 µs	625 µs	625 µs
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes
1. Interface
Interface type	PROFINET	PROFINET	PROFINET
Physics	Ethernet	Ethernet	Ethernet
Isolated	Yes	Yes	Yes
automatic detection of transmission rate	Yes	Yes	Yes
Autonegotiation	Yes	Yes	Yes
Autocrossing	Yes	Yes	Yes
Interface types
● Number of ports	1	1	1
● integrated switch	No	No	No
Functionality
● PROFINET IO Controller	Yes	Yes	Yes
● PROFINET IO Device	Yes	Yes	Yes
● SIMATIC communication	Yes	Yes	Yes
● Open IE communication	Yes	Yes	Yes
● Web server	Yes	Yes	Yes
● Media redundancy	No	No	No
PROFINET IO Controller
● Transmission rate, max.	100 Mbit/s	100 Mbit/s	100 Mbit/s
Services
— PG/OP communication	Yes	Yes	Yes
— S7 routing	Yes	Yes	Yes
— Isochronous mode	No	No	No
— Open IE communication	Yes	Yes	Yes
— IRT	No	No	No
— MRP	No	No	No
— MRPD	No	No	No
— PROFIenergy	No	No	No
— Prioritized startup	Yes	Yes	Yes
— Number of IO devices with prioritized startup, max.	16	16	16
— Number of connectable IO Devices, max.	16	16	16
— Number of connectable IO Devices for RT, max.	16	16	16
— of which in line, max.	16	16	16
— Activation/deactivation of IO Devices	Yes	Yes	Yes
— Number of IO Devices that can be simultaneously activated/deactivated, max.	8	8	8
— Updating time	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.	The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data.
PROFINET IO Device
Services
— PG/OP communication	Yes	Yes	Yes
— S7 routing	Yes	Yes	Yes
— Isochronous mode	No	No	No
— Open IE communication	Yes	Yes	Yes
— IRT	No	No	No
— MRP	No	No	No
— MRPD	No	No	No
— PROFIenergy	Yes	Yes	Yes
— Shared device	Yes	Yes	Yes
— Number of IO Controllers with shared device, max.	2	2	2
Protocols
Supports protocol for PROFINET IO	Yes	Yes	Yes
PROFIBUS	Yes; CM 1243-5 required	Yes; CM 1243-5 required	Yes; CM 1243-5 required
AS-Interface	Yes; CM 1243-2 required	Yes; CM 1243-2 required	Yes; CM 1243-2 required
Protocols (Ethernet)
● TCP/IP	Yes	Yes	Yes
● DHCP	No	No	No
● SNMP	Yes	Yes	Yes
● DCP	Yes	Yes	Yes
● LLDP	Yes	Yes	Yes
Open IE communication
● TCP/IP
— Data length, max.	8 kbyte	8 kbyte	8 kbyte
— several passive connections per port, supported	Yes	Yes	Yes
● ISO-on-TCP (RFC1006)	Yes	Yes	Yes
— Data length, max.	8 kbyte	8 kbyte	8 kbyte
● UDP
— Data length, max.	1 472 byte	1 472 byte	1 472 byte
Further protocols
● MODBUS	Yes	Yes	Yes
Communication functions
S7 communication
● supported	Yes	Yes	Yes
● as server	Yes	Yes	Yes
● as client	Yes	Yes	Yes
● User data per job, max.	See online help (S7 communication, user data size)	See online help (S7 communication, user data size)	See online help (S7 communication, user data size)
Open IE communication
● TCP/IP	Yes	Yes	Yes
● UDP	Yes	Yes	Yes
Web server
● supported	Yes	Yes	Yes
● User-defined websites	Yes	Yes	Yes
Number of connections
● overall	16; dynamically	16; dynamically	16; dynamically
Test commissioning functions
Status/control
● Status/control variable	Yes	Yes	Yes
● Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Forcing
● Forcing	Yes	Yes	Yes
Diagnostic buffer
● present	Yes	Yes	Yes
Traces
● Number of configurable Traces	2	2	2
● Memory size per trace, max.	512 kbyte	512 kbyte	512 kbyte
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED	Yes	Yes	Yes
● ERROR LED	Yes	Yes	Yes
● MAINT LED	Yes	Yes	Yes
Integrated Functions
Number of counters	3	6	3
Counting frequency (counter) max.	100 kHz	100 kHz	100 kHz
Frequency meter	Yes	Yes	Yes
controlled positioning	Yes	Yes	Yes
Number of position-controlled positioning axes, max.	8	8	8
Number of positioning axes via pulse-direction interface	Up to 4 with SB 1222	4; With integrated outputs	Up to 4 with SB 1222
PID controller	Yes	Yes	Yes
Number of alarm inputs	4	4	4
Number of pulse outputs		4
Limit frequency (pulse)		100 kHz
Potential separation
Potential separation digital inputs
● Potential separation digital inputs	500V AC for 1 minute	No	500V AC for 1 minute
● between the channels, in groups of	1	1	1
Potential separation digital outputs
● Potential separation digital outputs	Relays	Yes	Relays
● between the channels	No	No	No
● between the channels, in groups of	1	1	1
EMC
Interference immunity against discharge of static electricity
● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2	Yes	Yes	Yes
— Test voltage at air discharge	8 kV	8 kV	8 kV
— Test voltage at contact discharge	6 kV	6 kV	6 kV
Interference immunity to cable-borne interference
● Interference immunity on supply lines acc. to IEC 61000-4-4	Yes	Yes	Yes
● Interference immunity on signal cables acc. to IEC 61000-4-4	Yes	Yes	Yes
Interference immunity against voltage surge
● on the supply lines acc. to IEC 61000-4-5	Yes	Yes	Yes
Interference immunity against conducted variable disturbance induced by high-frequency fields
● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6	Yes	Yes	Yes
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas	Yes; Group 1	Yes; Group 1	Yes; Group 1
● Limit class B, for use in residential areas	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011	Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
UL approval	Yes	Yes	Yes
cULus	Yes	Yes	Yes
FM approval	Yes	Yes	Yes
RCM (formerly C-TICK)	Yes	Yes	Yes
KC approval	Yes	Yes	Yes
Marine approval	Yes	Yes	Yes
Ambient conditions
Free fall
● Fall height, max.	0.3 m; five times, in product package	0.3 m; five times, in product package	0.3 m; five times, in product package
Ambient temperature during operation
● min.	-20 °C	-20 °C	-20 °C
● max.	60 °C	60 °C	60 °C
● horizontal installation, min.	-20 °C	-20 °C	-20 °C
● horizontal installation, max.	60 °C	60 °C	60 °C
● vertical installation, min.	-20 °C	-20 °C	-20 °C
● vertical installation, max.	50 °C	50 °C	50 °C
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C	-40 °C
● max.	70 °C	70 °C	70 °C
Air pressure acc. to IEC 60068-2-13
● Operation, min.	795 hPa	795 hPa	795 hPa
● Operation, max.	1 080 hPa	1 080 hPa	1 080 hPa
● Storage/transport, min.	660 hPa	660 hPa	660 hPa
● Storage/transport, max.	1 080 hPa	1 080 hPa	1 080 hPa
● permissible operating height	-1000 to 2000 m	-1000 to 2000 m	-1000 to 2000 m
Relative humidity
● Operation, max.	95 %; no condensation	95 %; no condensation	95 %; no condensation
Vibrations
● Vibrations	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail	2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail
● Operation, tested according to IEC 60068-2-6	Yes	Yes	Yes
Shock test
● tested according to IEC 60068-2-27	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms	Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms
Pollutant concentrations
● SO2 at RH < 60% without condensation	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free	S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free
Programming
Programming language
— LAD	Yes	Yes	Yes
— FBD	Yes	Yes	Yes
— SCL	Yes	Yes	Yes
Know-how protection
● User program protection/password protection	Yes	Yes	Yes
● Copy protection	Yes	Yes	Yes
● Block protection	Yes	Yes	Yes
Access protection
● Protection level: Write protection	Yes	Yes	Yes
● Protection level: Read/write protection	Yes	Yes	Yes
● Protection level: Complete protection	Yes	Yes	Yes
Cycle time monitoring
● adjustable	Yes	Yes	Yes
Dimensions
Width	90 mm	90 mm	90 mm
Height	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm
Weights
Weight, approx.	420 g	370 g	380 g