上海朔川電氣設備有限公司

免費會員·9年

您現在的位置：上海朔川電氣設備有限公司>>西門子S7-300>> 西門子6ES73172AK140AB0型號及規格

西門子6ES73172AK140AB0型號及規格

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：170更新時間：2017-10-18 16:18:13

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

西門子S7-300

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES73172AK140AB0型號及規格

產品介紹

西門子6ES73172AK140AB0型號及規格 西門子6ES73172AK140AB0型號及規格

6ES7317-2AK14-0AB0

SIMATIC S7-300,CPU 317-2 DP, *處理器 mit 1MB 工作存儲器, 1. SS MPI/DP 12MBit/s, 2. SS DP-Master/從站, 微型存儲卡需要

公司名稱：上海朔川電氣設備有限公司
聯 系人：吉夢琪
：
地址：上海市金山區涇波路129號
：2840735331

CPU 317-2 DP

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

應用

設計

功能

技術規范

概述

CPU具有大容量程序存儲器，可用于要求很高的應用
能滿足標準機床、特殊機床以及車間應用的多任務自動化系統
在具有集中式和分布式I/O的生產線上作為集中式控制器使用
對二進制和浮點數運算具有較高的處理能力
2 個 PROFIBUS DP 主站/從站接口
用于大量的 I/O 擴展
用于建立分布式 I/O 結構
在PROFIBUS上實現等時同步模式
可以選用SIMATIC工程工具
在基于組件的自動化中實現分布式智能系統

CPU 運行需要 SIMATIC 微存儲卡 (MMC)。

應用

CPU 317-2 DP 具有大容量程序存儲器.它可用于集中式I/O結構，也適用于分布式自動化結構。例如，可在生產線上作為一個*控制器使用，或作為機床控制器使用。

它可以地使用SIMATIC工程工具，例如：

用SCL編程
用S7-GRAPH進行順序控制編程

另外，CPU 為采用軟件來實現一些簡單的工藝任務提供了一個理想的平臺，例如：

簡單的運動控制
使用 STEP 7 塊或運行軟件“標準/模塊化PID控制” 來實現閉環控制任務的解決方案

通過使用 SIMATIC S7-PDIAG 可以實現擴展過程診斷。

設計

CPU 317-2 DP 安裝有：

微處理器;
處理器處理每條二進制指令執行時間約為 25 ns，每條浮點數運行指令約為 160ns。CPU 317-2 DP 具有*的字指令、雙字指令和 32 位定點數指令處理速度。
1 MB 工作存儲器（相當于約 340 K 指令）；
與程序組件執行相關的大容量工作存儲器為用戶程序提供了充分的空間。作為程序裝載存儲器的微型存儲卡（zui大為 8 MB）也允許將可以項目（包括符號和注釋）保存在 CPU 中。裝載存儲器還可用于數據歸檔和配方管理。
靈活的擴展能力;
多達 32 個模塊，（4排結構）
MPI/DP 組合接口；
*個 MPI/DP 集成接口zui多可以同時建立與 S7-300/400 或編程設備、PC、OP 的 32 條連接。在這些連接中，始終分別為 PG 和 OP 各保留一個連接。通過MPI和“全局?jǐn)?shù)據通訊”可以對32個CPU進行簡單組網。
該接口可以從 MPI 接口重新設置為 DP 接口。DP 接口可用作 DP 主站或 DP 從站運行。
PROFIBUS DP 接口:
CPU 317-2 DP 第2個內置接口是一個純粹的 PROFIBUS DP 接口，可用作 DP 主站或 DP 從站?？梢越M建一個高速的、易于處理的分布式自動化結構。對用戶來說,分布式I/O單元可作為一個集中式單元來處理(相同的組態、編址和編程)。在該接口上，PROFIBUS DP從站可在等時模式下運行．
全面支持 PROFIBUS DP V1 標準。這將增加 DP V1 標準從站在診斷和參數賦值能力的范圍。
限制:兩個接口不能同時作為從站來運行。

功能

口令保護;
用戶程序使用密碼保護，可防止非法訪問。
塊加密；
函數 (FC) 和功能塊 (FB) 可以通過 S7-Block Privacy，加密存儲于 CPU 以保護專有技術。
診斷緩沖;
診斷緩沖區中可存儲zui后 500 條錯誤和中斷事件，其中的 100 條事件可以*存儲。
免維護的數據后備;
在電源故障時，CPU 將自動保存所有數據（zui大 256 KB），從而使數據可以在電壓恢復后再次使用，且不會發生改變。

可參數化的特性

可以使用 STEP 7 對 S7 的組態、屬性以及CPU的響應進行參數設置：

概述；
定義名稱、上位名稱和位置 ID
啟動；
定義 CPU 的啟動特性和監視時間
同步循環中斷；
設置 DP 主站系統、過程映像分區編號和延時時間
循環/時鐘存儲器；
zui大循環時間和負載，設定時鐘存儲器地址。啟用優先 HMI 通訊
記憶性；
設置保持區
日時鐘中斷；
設定起始日期、起始時間和間隔周期
周期中斷；
周期設定
系統診斷；
確定診斷消息的處理和范圍
時鐘；
設定AS內或MPI上的同步類型
防護等級；
定義程序和數據的訪問權限
通訊；
保留連接源
MPI/PROFIBUS-DP 接口:
設置接口類型。定義節點地址。對操作模式進行參數化，并組態使用 PROFIBUS DP 時的傳輸區對時間同步進行參數化
PROFIBUS DP 主站/從站接口;
針對分布式 I/O 的用戶定義地址分配。對操作模式進行參數化，并組態使用 PROFIBUS DP 時的傳輸區域。對時間同步進行參數化

顯示功能與信息功能

狀態和故障指示；
發光二極管顯示，例如，硬件、編程、定時器、I/O、總線故障以及運行狀態，如RUN、STOP、Startup。
測試功能；
可使用編程器顯示程序執行過程中的信號狀態，可以不通過用戶程序而修改過程變量，以及輸出堆棧內容。
信息功能；
通過編程器以文本形式為用戶提供存儲能力信息、CPU的運行模式，以及主存儲器和裝載存儲器當前的使用情況、當前的循環時間和診斷緩沖區的內容。

集成的通訊功能

編程器/OP 通訊
全局?jǐn)?shù)據通訊
S7 基本通訊
S7 通訊(只是服務器)
路由
數據記錄路由

系統功能

CPU 具有廣泛的系統功能特性，諸如：診斷、參數賦值、報警、定時和測量等。

詳細信息請參見手冊。

技術規范

Article number		6ES7317-2AK14-0AB0
		CPU317-2 DP, 1 MB
General information
Hardware product version		01
Firmware version		V3.3
Engineering with
● Programming package		STEP 7 as of V5.5 + SP1 or STEP 7 V5.2 + SP1 or higher with HSP 202
Supply voltage
Rated value (DC)
● 24 V DC		Yes
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		2 A min.
Mains buffering
● Mains/voltage failure stored energy time		5 ms
● Repeat rate, min.		1 s
Input current
Current consumption (rated value)		870 mA
Current consumption (in no-load operation), typ.		120 mA
Inrush current, typ.		4 A
I²t		1 A²·s
Power loss
Power loss, typ.		4.5 W
Memory
Work memory
● integrated		1 024 kbyte
● expandable		No
● Size of retentive memory for retentive data blocks		256 kbyte
Load memory
● Plug-in (MMC)		Yes
● Plug-in (MMC), max.		8 Mbyte
● Data management on MMC (after last programming), min.		10 y
Backup
● present		Yes; Guaranteed by MMC (maintenance-free)
● without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.025 µs
for word operations, typ.		0.03 µs
for fixed point arithmetic, typ.		0.04 µs
for floating point arithmetic, typ.		0.16 µs
CPU-blocks
Number of blocks (total)		2 048; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
● Number, max.		2 048; Number range: 1 to 16000
● Size, max.		64 kbyte
FB
● Number, max.		2 048; Number range: 0 to 7999
● Size, max.		64 kbyte
FC
● Number, max.		2 048; Number range: 0 to 7999
● Size, max.		64 kbyte
OB
● Description		see instruction list
● Size, max.		64 kbyte
● Number of free cycle OBs		1; OB 1
● Number of time alarm OBs		1; OB 10
● Number of delay alarm OBs		2; OB 20, 21
● Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
● Number of process alarm OBs		1; OB 40
● Number of DPV1 alarm OBs		3; OB 55, 56, 57
● Number of isochronous mode OBs		1; OB 61
● Number of startup OBs		1; OB 100
● Number of asynchronous error OBs		5; OB 80, 82, 85, 86, 87
● Number of synchronous error OBs		2; OB 121, 122
Nesting depth
● per priority class		16
● additional within an error OB		4
Counters, timers and their retentivity
S7 counter
● Number		512
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		511
— preset		Z 0 to Z 7
Counting range
— lower limit		0
— upper limit		999
IEC counter
● Number		Unlimited (limited only by RAM capacity)
S7 times
● Number		512
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		511
— preset		No retentivity
Time range
— lower limit		10 ms
— upper limit		9 990 s
IEC timer
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		All, max. 256 KB
Flag
● Number, max.		4 096 byte
● Retentivity available		Yes; From MB 0 to MB 4095
● Retentivity preset		MB 0 to MB 15
● Number of clock memories		8; 1 memory byte
Data blocks
● Number, max.		2 048; Number range: 1 to 16000
● Size, max.		64 kbyte
● Retentivity adjustable		Yes; via non-retain property on DB
● Retentivity preset		Yes
Local data
● per priority class, max.		32 768 byte; Max. 2048 bytes per block
Address area
I/O address area
● Inputs		8 192 byte
● Outputs		8 192 byte
of which distributed
— Inputs		8 192 byte
— Outputs		8 192 byte
Process image
● Inputs		8 192 byte
● Outputs		8 192 byte
● Inputs, adjustable		8 192 byte
● Outputs, adjustable		8 192 byte
● Inputs, default		256 byte
● Outputs, default		256 byte
Subprocess images
● Number of subprocess images, max.		1
Digital channels
● Inputs		65 536
— of which central		1 024
● Outputs		65 536
— of which central		1 024
Analog channels
● Inputs		4 096
— of which central		256
● Outputs		4 096
— of which central		256
Hardware configuration
Number of expansion units, max.		3
Number of DP masters
● integrated		2
● via CP		4
Number of operable FMs and CPs (recommended)
● FM		8
● CP, PtP		8
● CP, LAN		10
Rack
● Racks, max.		4
● Modules per rack, max.		8
Time of day
Clock
● Hardware clock (real-time)		Yes
● retentive and synchronizable		Yes
● Backup time		6 wk; At 40 °C ambient temperature
● Deviation per day, max.		10 s; Typ.: 2 s
● Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
● Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
● Number		4
● Number/Number range		0 to 3
● Range of values		0 to 2^31 hours (when using SFC 101)
● Granularity		1 hour
● retentive		Yes; Must be restarted at each restart
Clock synchronization
● supported		Yes
● to MPI, master		Yes
● to MPI, slave		Yes
● to DP, master		Yes; With DP slave only slave clock
● to DP, slave		Yes
● in AS, master		Yes
● in AS, slave		Yes
● on Ethernet via NTP		No
Digital inputs
Number of digital inputs		0
Digital outputs
Number of digital outputs		0
Analog inputs
Number of analog inputs		0
Analog outputs
Number of analog outputs		0
Interfaces
Number of industrial Ethernet interfaces		0
Number of RS 485 interfaces		2; Combined MPI / PROFIBUS DP and PROFIBUS DP
Number of RS 422 interfaces		0
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
● MPI		Yes
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes; A DP slave at both interfaces simultaneously is not possible
● Point-to-point connection		No
MPI
● Transmission rate, max.		12 Mbit/s
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		Yes
— S7 basic communication		Yes
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No; but via CP and loadable FB
— S7 communication, as server		Yes
DP master
● Transmission rate, max.		12 Mbit/s
● Number of DP slaves, max.		124
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		No
— S7 basic communication		Yes; I blocks only
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No
— S7 communication, as server		Yes
— Equidistance		Yes
— Isochronous mode		No
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Number of DP slaves that can be simultaneously activated/deactivated, max.		8
— Direct data exchange (slave-to-slave communication)		Yes; As subscriber
— DPV1		Yes
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
User data per DP slave
— Inputs, max.		244 byte
— Outputs, max.		244 byte
DP slave
● Transmission rate, max.		12 Mbit/s
● automatic baud rate search		Yes; only with passive interface
● Address area, max.		32
● User data per address area, max.		32 byte
Services
— PG/OP communication		Yes
— Routing		Yes; Only with active interface
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No
— S7 communication, as server		Yes; Connection configured on one side only
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		No
Transfer memory
— Inputs		244 byte
— Outputs		244 byte
2. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
● MPI		No
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes; A DP slave at both interfaces simultaneously is not possible
● Point-to-point connection		No
DP master
● Transmission rate, max.		12 Mbit/s
● Number of DP slaves, max.		124
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		No
— S7 basic communication		Yes; I blocks only
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No; but via CP and loadable FB
— S7 communication, as server		Yes
— Equidistance		Yes
— Isochronous mode		Yes; OB 61
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Number of DP slaves that can be simultaneously activated/deactivated, max.		8
— Direct data exchange (slave-to-slave communication)		Yes; As subscriber
— DPV1		Yes
Address area
— Inputs, max.		8 192 byte
— Outputs, max.		8 192 byte
User data per DP slave
— Inputs, max.		244 byte
— Outputs, max.		244 byte
DP slave
● GSD file		The latest GSD file is available on the Internet (http://www.siemens。。ｃｏｍ/profibus-gsd)
● Transmission rate, max.		12 Mbit/s
● automatic baud rate search		Yes; only with passive interface
● Address area, max.		32
● User data per address area, max.		32 byte
Services
— PG/OP communication		Yes
— Routing		Yes; Only with active interface
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No; but via CP and loadable FB
— S7 communication, as server		Yes
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		No
Transfer memory
— Inputs		244 byte
— Outputs		244 byte
Communication functions
PG/OP communication		Yes
Data record routing		Yes
Global data communication
● supported		Yes
● Number of GD loops, max.		8
● Number of GD packets, max.		8
● Number of GD packets, transmitter, max.		8
● Number of GD packets, receiver, max.		8
● Size of GD packets, max.		22 byte
● Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
● supported		Yes
● User data per job, max.		76 byte
● User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● supported		Yes
● as server		Yes
● as client		Yes; Via CP and loadable FB
● User data per job, max.		See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
S5 compatible communication
● supported		Yes; via CP and loadable FC
Number of connections
● overall		32
● usable for PG communication		31
— reserved for PG communication		1
— adjustable for PG communication, min.		1
— adjustable for PG communication, max.		31
● usable for OP communication		31
— reserved for OP communication		1
— adjustable for OP communication, min.		1
— adjustable for OP communication, max.		31
● usable for S7 basic communication		30
— reserved for S7 basic communication		0
— adjustable for S7 basic communication, min.		0
— adjustable for S7 basic communication, max.		30
● usable for routing		X1 as a MPI, max. 10; X1 as DP Master max. 24; X1 as DP Slave (active) max. 14; X2 as DP Master max. 24; X2 as DP Slave (active) max. 14
S7 message functions
Number of login stations for message functions, max.		32; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
● Status/control variable		Yes
● Variables		Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max.		30
— of which status variables, max.		30
— of which control variables, max.		14
Forcing
● Forcing		Yes
● Forcing, variables		Inputs, outputs
● Number of variables, max.		10
Diagnostic buffer
● present		Yes
● Number of entries, max.		500
— adjustable		No
— of which powerfail-proof		100; Only the last 100 entries are retained
● Number of entries readable in RUN, max.		499
— can be set		Yes; From 10 to 499
— preset		10
Service data
● can be read out		Yes
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		60 °C
Configuration
Configuration software
● STEP 7		Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
● STEP 7 Lite		No
Programming
● Command set		see instruction list
● Nesting levels		8
● System functions (SFC)		see instruction list
● System function blocks (SFB)		see instruction list
Programming language
— LAD		Yes
— FBD		Yes
— STL		Yes
— SCL		Yes
— CFC		Yes
— GRAPH		Yes
— HiGraph®		Yes
Know-how protection
● User program protection/password protection		Yes
● Block encryption		Yes; With S7 block Privacy
Dimensions
Width		40 mm