德國倍加福代理商P+F現貨隔離K系列導軌式信號轉換安全柵KCD2-UT2-EX1

Universal Temperature Converter KCD2-UT2-Ex1

德國倍加福代理商P+F現貨隔離K系列導軌式信號轉換安全柵KCD2-UT2-EX1

網段保護器	現場總線安全柵	滲漏檢測傳感器
KLD0-SAA	F.FB0.P.A.1.0.*..***	BP-FBPS-1.30.1
R2-SP-IC*	F.FB0.S.A.1.0.*..***	ELS-1
RM-SP*	F.FB1.P14.A*.1..*..***	KT-MB-DMA
R-SP-E12	F.FB1.S14.A*.1..*..***	KT-SRT-FF
SPJB-*-AL.***	F2D0-FB-Ex4.*	USB-FBPS-1.11.45.NI
SPJB-*-CS.***	R4D0-FB-IA*
SPJB-*-FB.***	RD0-FB-Ex4.*
SPJB--PCW.*
SPJB-*-SS.***

KCD2-UT2-EX1

德國

參數表節選：的技術參數 KCD2-UT2-Ex1

產品闡述
Current output 0/4 mA ... 20 mA

General specifications
Signal type		Analog input
Supply
Connection		terminals 9+, 10- or power feed module/Power Rail
Rated voltage		19 ... 30 V DC
Ripple		within the supply tolerance
Power dissipation/power consumption		≤ 0.98 W / 0.98 W
Input
Connection		terminals 1, 2, 3, 4
RTD		type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995) type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94) type Cu10, Cu50, Cu100 (P50353-92) type Ni100 (DIN 43760)
	Measuring current	approx. 200 µA with RTD
	Types of measuring	2-, 3-, 4-wire connection
	Lead resistance	max. 50 Ω per line
	Measuring circuit monitoring	sensor breakage, sensor short-circuit
Thermocouples		type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) type TXK, TXKH, TXA (P8.585-2001)
	Cold junction compensation	external and internal
	Measuring circuit monitoring	sensor breakage
Potentiometer		0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection)
Voltage		selectable within the range -100 ... 100 mV
Input resistance		≥ 1 MΩ (-100 ... 100 mV)
Output
Connection		terminal 5: source (-), terminal 6: source (+), terminal 7: sink(-), terminal 8: sink (+)
Output		Analog current output
	Current range	0 ... 20 mA or 4 ... 20 mA
	Fault signal	downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)
	Source	load 0 ... 550 Ω open-circuit voltage ≤ 18 V
	Sink	Voltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V, series resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage. The maximum value of the resistance is (V - 5)/0.0215 Ω.
Transfer characteristics
Reaction time		worst case value (sensor breakage and/or sensor short circuit detection enabled) mV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 100 g
Dimensions		12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 inch) , housing type A2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		BASEEFA 13 ATEX 0102 X
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I
Statement of conformity		BASEEFA 13 ATEX 0103 X
	Group, category, type of protection, temperature class	II 3G Ex nA II T4 Gc [device in zone 2]
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval
	Control drawing	116-0379 (cULus)
IECEx approval		IECEx BAS 13.0057X
	Approved for	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I