目錄:中國一拖集團有限公司>>特專車輛>>特種叉車>> CPCD30越野叉車
| 參考價 | 面議 |
| 參考價 | 面議 |
更新時間：2021-04-15 18:50:26瀏覽次數：1039評價
聯系我們時請說明是智能制造網上看到的信息，謝謝!
| 型號 Model | CPCD30(越野) | |||
| 動力形式Power type | 內燃 Diesel | |||
| 額定起重量Rated capacity | kg | 3000 | ||
| 載荷中心距Load center | mm | 500 | ||
| 標準起升高度Lift height | mm | 3300 | ||
| 門架傾角(前/后)Mast tilt angle (forward/backward) | Deg | 10/12 | ||
| 前懸距 Front overhang | mm | 600 | ||
| 軸距 Wheel-base | mm | 1850 | ||
| 輪距（前/后）Tread(front/rear) | mm | 1350/1290 | ||
| 行車制動 Travel brake | 液壓-踏板式Hydraulic-Foot pedal | |||
| 停車制動 Parking brake | 機械-手動式Mechanical-Hａnd level | |||
| 起升速度（滿載/空載）Lift speed(with/without load) | mm/s | 380/520 | ||
| 下降速度（滿載/空載）Lower speed (with/without load) | mm/s | ＜380 | ||
| 行駛速度（滿載/空載）Travel speed (with/without load) | km/h | 20/25 | ||
| 最大爬坡（滿載）Max. gradeability (laden) | % | 20 | ||
| 發動機 Engine | 型號 Model | 4D32G31 | ||
| 制造商 Manufacturer | 新昌Xinchang | |||
| 額定功率 Rated power | kw | 36.8/2500 | ||
| 最大扭矩 Max.rotation | 186/1800 | |||
| 排量Displacement | 3.168 | |||
| 蓄電池 Battery | 電壓 Voltage | V | 12 | |
| 容量 Capacity | Ah | 100 | ||
| 變速箱 Gearbox | 傳動形式Transmission type | 液力 Hydraulic | ||
| 檔位（前/后）Gears,speed (front/rear) | Ⅰ/Ⅰ | |||
| 輪胎 Tire | 類型 type | 充氣胎 Pneumatic tyres | ||
| 型號 Model | 前 Pront | 14-17.5-14PR | ||
| 后 Rear | 10-16.5-10PR | |||
| 自重Dead.weight | kg | 4600 | ||
| 自由起升高度Free lift height | mm | 120 | ||
| 貨叉Fork | 厚度×寬度×長度 Thickness×Width×Length | mm | 40×125×1070 | |
| 外形尺寸 Overall dimensions | 全長（不帶貨叉）Overall length(without forks) | mm | 2930 | |
| 全寬Overall width | mm | 1800 | ||
| 全高 Overall height | 門架升起時Extended height(mast) | mm | 4650 | |
| 門架未升起Lower height(mast) | mm | 2342 | ||
| 護頂架Overhead guard | mm | 2452 | ||
| 最小轉彎半徑Min. turning radius | mm | 3050 | ||
| 最小離地間隙 Min. under ground clearance | 門架處 Under mast | mm | 220 | |
| 軸距中點處Center of wheel-base | mm | 315 |
(空格分隔,最多3個,單個標簽最多10個字符)
會員.png)
10
智能制造網