特點 features:

新穎設計的操作控制鍵和lcd顯示屏。能顯示壓痕對角線d1和d2，硬度標尺h(yuǎn)v或hk，硬度值，試驗力，保持時間，測量次數，日期和時間，測量統計，以及加荷過程等。可對試驗力，保持時間，日期和時間等進行設定。通過觸摸鍵可以無級調節光源亮度，轉動塔臺及控制加荷。

本機免除了查表的麻煩。用測微目鏡測得的對角線長度后輸入, 即可在lcd上顯示硬度值。通過內置打印機，可輸出測量數據，zui大值，zui小值，分散度，平均值和均方差等。

novel design of control buttons and lcd display. auto motorized tureet.

with the touch buttons and the lcd screen, it is easy and visual to set hardness scale (hv or hk), date; to se-lect the force duration; to adjust the brightness of illuminating lamp; to operate the turret; and etc.

after taking the d1 (d2) from eyepiece micrometer and entering them, the hardness ＆#118alue is displayed on lcd. by the aid of a built-in printer, the measured data (hv or hk hardness ＆#118alues, max, min, average, deviation, etc. can be printed out.

技術規格 main specifications

型號 type	hx-1000t（停產）	hx-1000tm
物鏡/壓頭切換 lens/indenter switch	手動轉塔切換 with hand turret	自動轉塔切換 with motorized turret
試驗力 test force	9.807, 4.903, 2.942, 1.961, 0.9807, 0.4903, 0.2452, 0.0981 n 1000, 500, 300, 200, 100, 50, 25, 10 gf
加荷方式 loading mode	程控自動加荷,保荷和卸荷 program-controlled application, duration and removal of load
保荷時間 duration time	5 – 60 sec se-lectable, 步長 (in step of ) 5 sec.
硬度測量范圍 measuring range	5 hv – 3000 hv
測量顯微鏡 microscope	物鏡 ob-jective: 40x; 10x（觀察用 for observation only）,目鏡 eyepiece: 15x 總倍率 total: 600x; 150x （觀察用 for observation only）
zui小檢測單位 min. detection	0.025 µm
zui小檢測單位 min. detection	0.025 µm
光路切換 optical path	測量/攝影切換 measurement / photo switch
測量讀數方式 measuring mode	輸入用測微目鏡測得的對角線長度, 即在lcd上顯示硬度值?？纱蛴∮涗洝?/FONT> after taking the d1(d2) from eyepiece micrometer and entering them, the hardness ＆#118alue is displayed on lcd and the data can be printed out.
試件zui大高度 max..test height	90 mm
攝像裝置 photographic device	數碼顯微目鏡及軟件 digital microscopic eyepiece, adaptor and software for viewing and editing images.
標準配件，附件 standard attachments	物鏡ob-jective 40x,10x, 維氏壓頭vickers indenter (在機上built on tester) 標準硬度塊 standard hardness block 薄片夾緊器 sheet specimen clamp 小圓柱體夾緊器 thin cylinder clamp 平口鉗 parallel-jaw vice 內置打印機 built-in printer 數碼顯微攝像目鏡及軟件sde-100 digital imaging eyepiece and soft