工業制氧機

1，工作原理

TAO制氧機分離空氣主要由兩個填滿分子篩的吸附塔組成，在常溫條件下，將壓縮空氣經過過濾，除水干燥等凈化處理后進入吸附塔，在吸附塔中空氣中的氮氣等被分子篩所吸附，而使氧氣在氣相中得到富集，從出口流出貯存在氧氣緩沖罐中，而在另一塔已完成吸附的分子篩被迅速降壓，解析出已吸附的成分，兩塔交替循環，即可得到純度為≥90%的廉價的氧氣。整個系統的閥門自動切換均由一臺電腦自動控制。

PSA制氧機因為其顯著的優點而被廣大用戶所青睞，它廣泛地應用于冶金助燃，化工、環保、建材、輕工、水產養殖、生物技術、污水處理等領域。

相關搜索，工業制氧機，工業制氧設備，空分制氧機，*，中小型制氧設備，氧氣發生器，制氧設備，制氧裝置，工業氧發生器，制氧系統，變壓吸附制氧機，3-3000立方制氧機等

2，技術指標

氧氣產量：5-200Nm3/h               氧氣純度：93%--95%

氧氣壓力：0.2—0.3Mpa              露點：--40℃（常壓下）

3，備注，

本套系統氧氣出口壓力一般為0.2-0.3Mpa，通過增壓灌裝系統后壓力為：      0.5-16.0Mpa,詳細技術環節。

1，Oxygen generator Principles:

PSA oxygen generator uses zeolite molecular sieve as sorbent, produces oxygen by making use of the PSA principle. Under certain pressure, zeolite molecular sieve has different oxygen/nitrogen adsorption capacity, i.e. much more nitrogen adsorption capacity than oxygen adsorption capacity. PLC controls pneumatic valve on/off to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces oxygen with desired purity.

2,Technical target

1.   Compressed Air Pressure:0.6—1.0Mpa     2.  Yield: 3--200Nm3/h   3.Purity:90%--95%

4.  Nitrogen outlet pressure:0.2—0.3Mpa      5.  Dewpoint≤-45℃    6，Consumption：Nm3/min

3,Note:
The set of the system outlet pressure of oxygen is generally 0.2-0.3Mpa, through the pressurization system after the filling pressure :0.5-16 .0 Mpa,.Detailed technical aspects, please call our company 24-hour service hotline :   , or asked me to the company related to the exchange of personnel on-site or by selling back-office to send more relevant information.