T2550常用模件類型

AO2二通道模擬量輸出卡，可冗余配置或單重配置

AO2 analogue output - 2 channel

This analogue output module provides two isolated analogue output channels. Each output may be independently configured for current or voltage mode. The module can be optionally fitted with disconnects to allow isolation of an individual output to allow work on the individual loop to continue safely.

No of channels: 2
Current output: -0.1 to 20.5mA; 10V dc maximum compliance
with total burden less than 500Ω
Voltage output: 0 to 10V dc; 20mA maximum compliance with
total load greater than 500ohms
-0.5 to 10.5 V dc; 20mA maximum compliance
with total load greater than 1500Ω
　

T2550常用模件類型

DI4 2500 四通道開關量輸入 （邏輯輸入）
DI8_LG 2500 八通道開關量輸入 （邏輯輸入）
DI8_CO 2500 八通道開關量輸入 （接點輸入）
DI6_MV 2500 六通道開關量輸入 （交流電輸入, 115V rms）
DI6_HV 2500 六通道開關量輸入 （交流電輸入, 230V rms）
　

DI4 digital input - 4 channel

This digital input module accepts four logic inputs, and may be wired either for voltage input （either polarity） or for contact closure.

No of channels: 4
Input functions: On/Off, pulse and de-bounce

DI8 logic input - 8 channel

This eight channel digital input module accepts eight logic inputs and is available in two factory option formats for voltage or contact-closure input.

No of channels: 8
Input functions: On/Off. pulse and de-bounce inputs with input invert

DI6 AC voltage input - 6 channel

The six channel digital input module accepts AC voltage inputs and is available in two factory options optimized for 115V ac or 230V ac ranges.

No of channels: 6
Input functions: On/Off or de-bounce
Frequency: 47Hz-63Hz
　

T2550常用模件類型

DO4_LG 2500 四通道開關量輸出 （外部供電, 10mA）
DO4_24 2500 四通道開關量輸出 （外部供電, 100mA）
RLY4 2500 四通道繼電器輸出 （6A/260Vac;3常開接點,1對常開/常閉接點）
RLY4（N） 新型四通道繼電器輸出6A/260Vac;3常開接點1對常開/常閉接點 ）
DO8（N） 新型八通道開關量輸出

DO4 logic output - 4 channel

This digital output module provides four logic outputs and is available in two factory option formats for standard or high-current output.

No of channels: 4
Logic Variant
Voltage supply: 18 Output current: >8mA high drive per channel （Current limited）
Output Voltage: At least Voltage supply （Vs） -3V switch drop
24 Variant
External supply: 12 Output current: 100mA maximum high drive per channel
（Current & Temperature limited）
Output voltage: At least Voltage supply （Vs） -3V switch drop

DO8 - digital output - 8 channel

The DO8 provides higher packing density and lower cost per channel. The eight digital output module provides eight logic outputs, which are typically used for control, alarms or events outputs. Each channel a 24V output with 0.75A capability （subject of a maximum of 4A total per module） can be used for driving solenoids, relays, lamps, fans, thyristor units, single phase Solid State Relays （SSRs） or some three phase SSRs.
Voltage supply （external）: 18-30V dc to plant devices Vs

RLY4 - relay output - 4 channel

This digital output module provides four relay outputs. The relay contacts are all fitted with removable snubber circuits to reduce contact arcing and prolong contact life.

No of channels: 4 （3 normally open + 1 changeover）
Max current rating: 2A at up to 240V ac; 0.5A at 200V dc,
ncreasing to 2A at 50V dc （resistive）