ZR-FG22聚全氟乙丙烯絕緣(阻燃)硅橡膠護套鋼帶鎧裝耐高溫電力電纜
安徽天康(集團)股份有限公司 :李貽敬
: : 2558004228
一、生產執行標準 GB/T12706-2008 Q/TK08-2013
二、使用特性
1、額定電壓UO/U: 0.6/1kV。
2、電纜允許zui高工作溫度: 氟塑料絕緣及護套為200℃;氟塑料絕緣耐熱105聚氯乙烯護套為105℃;氟塑料絕緣硅橡膠護套為180℃。
3、短路時(zui長持續間不超過5S)電纜導體的zui高溫度不超過250℃。
4、電纜敷設溫度應不低于-15℃。
5、電纜的彎曲半徑如下:?jiǎn)涡倦娎|:其彎曲半徑不小于電纜外徑的20D。
三芯電纜:其彎曲半徑不小于電纜外徑的15D。6、氟塑料絕緣及護套型電力電纜具有優異的耐化學腐蝕
性、耐高溫及阻燃性。
二、Performance in Usage
- Rated voltage UO/U: 0.6/1kv
- Max.working temperature allowed by cable is 200℃ for cable with fluoroplastic insulation and sheath, 105℃ for cable with fluoroplastic insulation,105℃ heat resistanc and PVC sheath, and 180℃ for cable with fluo-roplastic insulation and silicon rubber sheath.
3: Max temperature of cable conductor is no more than 250℃ during short circuit (The longest lasting time isno more than 5s).
4.Temperature for installation is no less than -15℃.
5.Bending radius of cable as follows:
It is no less than 20 times that of cable outer diam-eter for cable with single core
It is no less than 15 times that of cable outer diameter for cable with 3 cores
6: Power c able with f luoroplastic insulation and sheath has good features of chemical corrosion resis - tance, high temperature resistance and flame retardance.
三、技術參數(Technical Parameter)
1、20℃導體直流電阻應符合GB/T3956標準規定。(DC resistance of conductor at 20℃ shall meet the requirement of GB/T3956 standard.)
2、電纜應經受3500V交流耐壓試驗5min絕緣不擊穿。(Cable shall bear AC voltage test of 3500V for5min without puncture of insulation.)