智能制造網>產品庫>工業控制（老分類）>現場總線>CAN>>CAN/LIN總線控制器編程仿真與編譯調試工具

CAN/LIN總線控制器編程仿真與編譯調試工具

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱廣州智維電子科技有限公司
品牌
型號
所在地國外
廠商性質代理商
更新時間2022/2/13 18:04:22
訪問次數1549

產品標簽:

CAN/LIN總線編程調試工具

在線詢價收藏產品點擊查看電話

聯系我們時請說明是智能制造網 上看到的信息，謝謝!

索取相關資料

公司介紹主營產品

廣州智維電子科技有限責任公司是一家從事汽車測控和工業自動化測量設備行業的高科技公司。公司以“用科技做貢獻”為宗旨，以專業技術為核心，以優質產品為先導，為我國汽車測控和工業自動化測量設備領域的發展做貢獻。智維電子科技依靠國外汽車測控和自動化測量領域多家化大公司的雄厚技術實力，代理專業汽車測試測量及控制設備，開展CAN培訓，自主研發汽車測控設備和工業自動化測控系統，并提供Z有效的系統解決方案。

智維代理經銷瑞典Kvaser、德國BOSCH、Gantner、IPETRONIK、英國Warwick、PICO、Grant美國Midtronics、Innovate、日本HORIBA、北京賽維美等多家大企業的產品，主要包括CAN總線分析儀、CAN總線數據記錄儀、汽車測試系統、過程自動化測控系統等領域*的軟硬件產品。我們還為各個行業提供基于CAN總線技術的系統開發和技術培訓，分享測試和診斷*的技術和知識。專注于測試測量和控制，我們已經成為優秀的供應商和合作伙伴。智維開發和提供創新的全面的解決方案，用較早的高技術手段和我們的客戶一起完成這些方案。隨著系統開發的綜合性和廣泛性不斷提高，我們的經驗和專業技術也有很大成長。我們也將開發國內自主品牌的測控產品，不斷滿足國內汽車和工業自動化測控行業發展的需要。

展開顯示更多內容

CAN總線分析儀、CAN總線數據記錄儀、汽車測試系統、過程自動化測控系統、汽車專用測試示波器

產品簡介在線詢價

RLink 是Raisonance公司多功能、高性價比的一款CAN、LIN總線節點開發控制器在線編程仿真與編譯調試工具，適合STR7 (ARM7), STR9 (ARM9), STM32 (Cortex-M3), µPSD (8051), ST7 and STM8等ARM控制器開發編程調試. RLink采用Raisonance公司提供的集成環境 (RIDE)進行驅動, 用來作為開發工程師通過USB接口進行在線編程工具。

CAN/LIN總線控制器編程仿真與編譯調試工具產品信息

RLink
In-Circuit Debugger & Programmer

RLink is Raisonance's versatile, very low cost, high-performance In-Circuit Debugger & Programmer for STR7 （ARM7）, STR9 （ARM9）, STM32 （Cortex-M3）, µPSD （8051）, ST7 and STM8. RLink, driven by Raisonance's Integrated Environment （RIDE）, has been designed to connect to the user application board via the USB port allowing In-Circuit Programming and In-Circuit Debugging thanks to the serial protocol included in the used microcontroller.

RLink supports JTAG, ICC and SWIM:

20-pin JTAG ARM adapter for STR7, STR9 & STM32 microcontrollers. Supported STR7 & STR9 derivatives.
14-pin JTAG µPSD adapter for µPSD microcontrollers. Supported µPSD derivatives.
10-pin ICC-ST7 adapter for ST7 microcontrollers. Supported ST7 derivatives.
4-pin SWIM-STM8 adapter for STM8 microcontrollers. Supported STM8 derivatives.

Characteristics:

Dynamically programmable: possible addition of new protocols without changing the hardware nor the firmware but only the software
Up to 2 Mbit/s
from 3V to 5V
Based on ST7651AR6 （USB1.1）
Flexible software architecture: already supports µPSD, ST7, STM8, STR7, STR9 and STM32
No power supply needed. RLink is powered through the USB connection
Cost effective solution

Use:
RLink can be driven not only by RIDE （Raisonance IDE）, but also by other tools such as RFlasher, some inline programming applications and ST tools （PSDSoft and CAPS for µPSD, STVD7 and STVP7 for ST7 and STM8 ）.
This is done with no limitation and without the need of a Serial Number, as serialization is ensured by the RLink itself.

Versions:
2 box versions are available:

RLink standard （RLink-std, see picture above） allowing:
- µPSD debugging and programming
- ST7 debugging and programming
- STM8 debugging and programming
- STR7 full programming, only <32K debugging available
- STR9 full programming, only <32K debugging available
- STM32 full programming, only <32K debugging available
RLink Professional （RLink-Pro, see picture below） allowing unlimited:
- µPSD debugging and programming
- ST7 debugging and programming
- STM8 debugging and programming
- STR7 debugging and programming
- STR9 debugging and programming
- STM32 debugging and programming
Note that if you own a RLink standard it is possible to upgrade to RLink-Pro. And Starter-kit （STR7xx-SK）, （STR9xx-SK） or （STM32xx-SK） owners can have it at a preferential price.
See "Ordering Information" below.

RLink-Pro full In-Circuit Debugger & Programmer

Other versions of RLink are available delivered with the REva board as part of different starter-kits. In this case RLink is attached to the REva mother board and can be used （if you provide the correct adapter） in order to work as an RLink standard （RLink-std）.

Contents:

RLink-std or RLink-Pro Debugger/Programmer
4 adapters: ICC-ST7,SWIM-STM8, JTAG µPSD, JTAG ARM more details here
USB cable
CD including software tools for the ST7, STM8, 8051（µPSD）, STR7, STR9 and STM32 families. See below

Note that the contents of the two box versions （RLink-std and RLink-Pro） are the same. The only difference concerns the limitation （or non-limitation） of RLink for the use with ARM microcontrollers.

Software:
The CD includes:

RIDE6 （Raisonance Integrated Development Environment） drives RLink and integrates the different 8051 tools
8051 （µPSD） demo tools （C Compiler, Assembler, Linker, Simulator/Debugger） limited to 4kB for RIDE6
Ride7 （latest Raisonance Integrated Development Environment） drives RLink and has to be used with one of the software tools listed below.
RKit-ARM （STR7, STR9 & STM32） software tools （GNU C Compiler, GNU assembler, GNU Linker and Raisonance Simulator/Debugger）
RKit-STM8 software tools （C Compiler limited to 16KB, Assembler, Linker, Simulator/Debugger）
RFlasher: stand-alone programming included in Ride7 tool that drives RLink for ST7, STM8, STR7 and STR9 microcontrollers