智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
GW4-12TQ（D）W輕力矩免維護型，戶外高壓隔離開關，是頻率為50HZ-60 HZ、10kV的戶外高壓電器設備，供高壓線路在有電壓無負載情況下進行換接，以及對被檢修的高壓母線、斷路器等電器設備與帶電的高壓線路進行電氣隔離之用。也可用于分、合很小的電容電流和電感電流。GW4-12D/2000A型戶外大電流隔離開關.
GW4-12TQ(D) W outdoor high-voltage disconnector is outdoor high-voltage equipment with 50-60Hz frequency,10kV,Characterized by light torque, free maintenance. It can be changed and connected for high-voltage line under voltage and no load conditions; it also can be electrically disconnected between the HV electrical equipments such as the overhaul of high voltage busbar, CB, etc. and high voltage cables, also can be used to open or close small capacitor current and conductive current.
隔離開關的主要技術參數見下表
Main technical data of the disconnector as follows:
項目 Item | 參數 Technical data | |||
額定電壓 Rated voltage | 12 kV | |||
zui高工作電壓 Max. work voltage | 12 kV | |||
額定絕緣水平 Rated Insulation level | 一分鐘工頻耐受電壓 (有效值) 1 min power frequency withstand voltage (value) | 對地 To earth | 42kV | |
斷口 Fracture | 48 kV | |||
雷電沖擊耐受電壓 (峰值) Lightning impulse withstand voltage kV(peak value) | 對地 To earth | 105kV | ||
斷口 Fracture | 120 | |||
額定頻率Rated frequency | 50 or 60 Hz | |||
額定電流Rated current | 2000 | 2500 A | ||
熱穩定電流 (有效值) The current of thermal stabilization (value) | 40 | 40kA | ||
動穩定電流 (峰值) The current of dynamic stabilization (peak value) | 100 | 100kA | ||
接線端額定縱向機械負荷 Rated vertical mechanical loads of connection end | 500N | |||
配 用 機 構 Equipped mechanism | CS8-6D手動機構 CS8-6D manual operation mechanism | |||
CS8-6D手動機構manual mechanism
輔助開關極數 Pole number of auxiliary switch | 一個八節 Eight for each |
DSW4電磁鎖 DSW4 electromagnetism lock | 無 Nothing |
注：10kV的戶外隔離開關電流等級有400A、630A、1250A、1600A、2000A、2500A、3150A、4000A
GW4-12W/5000A不接地型，GW4-12DW/5000A單接地型，10kV戶外高壓隔離開關
高壓隔離開關技術規范表
序號 | 名 稱 | 單位 | 保證值 | |
| 隔離開關的結構與型式 |
| 雙柱水平旋轉 *開斷型 | 雙柱水平旋轉 *開斷型 |
1 | 型號 |
| GW4-12W/5000A 不接地型 | GW4-12DW/5000A 左或右接地型 |
2 | 操動機構的型式 |
|
|
|
| a) 型號 |
| CJ11A-G | CJ11A-G |
b) 三相聯動或分相操作 |
| 三相聯動 | 三相聯動 | |
c) 電動 |
| 電動 | 電動 | |
d) 電動電壓 | V | 交流380V | 交流380V | |
e) 控制電壓 | V | 交流220V | 交流220V | |
3 | 接地刀閘的操動機構型式 |
|
|
|
| a) 型號 |
|
| CS11G |
b) 三相聯動或分相操動 |
|
| 三相聯動 | |
c) 電動、手動或其它 |
|
| 手動 | |
d) 控制電壓 | V |
|
| |
4 | 隔離開關的輔助觸點 | 對 | 8 | 8 |
接地開關的輔助觸點 | 對 |
| 6 | |
二 | 額定參數 |
|
|
|
1 | 額定電壓 | kV | 12 | 12 |
2 | 額定頻率 | Hz | 50 | 50 |
3 | 額定電流 | A | 5000 | 5000 |
4 | 額定動穩定電流峰值 | kA | 125 | 50 |
5 | 額定熱穩定電流及其持續時間 | kA | 50/4S | 125 |
6 | 分閘時間（參考） | S | 4±1 | 50/4S |
| 合閘時間（參考） | S | 4±1 | 4±1 |
7 | 分閘平均速度（參考） | mm/s | 110 | 110 |
合閘平均速度（參考） | mm/s | 110 | 110 | |
8 | 三相分、合閘的操作同期性 | mm | 5 | 5 |
9 | 隔離開關組合負載的安全系統 |
|
|
|
| a) 持續組合負載 |
| 3.5 | 3.5 |
b) 短時組合負載 |
| 1.7 | 1.7 | |
10 | 額定絕緣水平 |
|
|
|
|
耐受電壓 |
|
|
|
斷口 | kV | 48 | 48 | |
對地 | kV | 42 | 42 | |
b) 額定雷電沖擊下 耐受電壓 |
|
|
| |
斷口 | kV | 85 | 85 | |
對地 | kV | 75 | 75 | |
11 | 絕緣子的要求 |
|
|
|
| a) 支柱絕緣子抗彎 | kN | 4 | 4 |
抗扭強度 | kN.m | 1.5 | 1.5 | |
zui小爬電距離 | mm | ≥400 | ≥400 | |
干弧距離 | mm | ≥200 | ≥200 | |
b) 旋轉絕緣子抗彎 | N | 4 | 4 | |
抗扭強度 | kN.m | 1.5 | 1.5 | |
zui小爬電距離 | mm | ≥400 | ≥400 | |
干弧距離 | mm | ≥200 | ≥200 | |
c) 傘裙參數P1 | mm | 55 | 55 | |
傘裙參數P2 | mm | 40 | 40 | |
傘裙參數S |
| 1.36 | 1.36 | |
12 | 開斷電容電流值 | A | 1 | 1 |
13 | 開斷小電感電流值 | A | 0.5 | 0.5 |
14 | 接線端子靜負荷 |
|
|
|
| a) 水平 | N | 500 | 500 |
b) 橫向 | N | 400 | 400 | |
c) 垂直 | N | 400 | 400 | |
15 | 接線端子安全系數(主端子板在不變形能承受的zui大彎矩) | N.m | 3.5(400) | 3.5(400) |
16 | 是否配套供應安裝鋼架 | mm | 否 | 否 |
17 | 機械壽命（空載次數） | 次 | ≥2000 | ≥2000 |
1 隔離開關本體Body of disconnector.
2 主刀相間聯管(廠家提供) Connecting tube between phases of main blade (provided by manufacturer).
3 上聯抱箍Upper connecting fastener of main earth blade.
4 主地刀垂直聯管(32水煤氣管,用戶自備) Vertical connecting tube of main earth blade (provided by customer).
5 主地刀下聯抱箍Lower connecting fastener of main earth blade.
6 CS8-6D方型手動機構 CS8-6D square-shape manual mechanism.
7 地刀水平聯管(32水煤氣管,用戶自備) Horizontal connecting tube of earth blade (provided by customer).
8 地刀聯接抱箍Connecting fastener of earth blade.
GW4-12DW/4000A單接地型隔離開關三極聯裝圖
注：CS8-6DG 方型手動機構,主刀及地刀配輔助開關用戶若無要求按4常開4常閉供貨。Note: CS8-6DG square-shape manual mechanism, the auxiliary swithches of main blade and earth balde are 4-open and 4-close.
