30V-10A-60W Output Module Specification
Autoranging Power Supplies PM2811, PM2812 and PM2813 Range  Output Voltage: 0 to 30V
Output Current: 0 to 10A
Output Power: 60W
Overvoltage protection: 2 to 32V  
Accuracy  （at calibration temperature）
Output Voltage: ± （0.04% of setting + 10 mV）
Output Current: ± （0.1% of setting + 50 mA）
Over Voltage Protection: ± （0.5 % of setting + 150 mV）  
Temperature coefficient  Output Voltage: （0.016% of setting + 2 mV） /K
Output Current: （0.05% of setting + 2 mA） /K  
Long term drift  （in an 8 hour period）
Output Voltage: 0.04% of setting + 5 mV
Output Current: 0.05% of setting + 10 mA  
Programming Resolution  （12 bit）
Output Voltage: 7.5 mV/LSB）
Output Current: 2.5 mA/LSB）
Over Voltage Protection: 7.5 mV/LSB）  
Source Effect  （for any line voltage change within rating）
Voltage: ± （0.01% of setting + 2 mV）
Current: ± （0.02% of setting + 2 mA）  
Load Effect  （load change 10% to 90% or 90% to 10% full load）
Constant Voltage: ± （0.01% of setting + 5 mV）
Constant Current: ± （0.02% of setting + 5 mA）  
Load cross regulation  Negligible for both voltage and current  
Output Noise （PARD）  Constant Voltage pp/rms （40 Hz to 30 MHz）: 15 mV/3 mV
Constant Current rms: 10 mA
Switching Frequency: approx. 20 kHz