葉片式流動開關是利用水的流動量帶動葉片, 來測式管內液體是否流動,當液體在管路內沒有流動時, 彈簧將磁鐵往下壓葉片成垂直，此時磁簧開關無動作，接點在常開（NO）位置。 

詳細介紹：
       葉片式流動開關是利用水的流動量帶動葉片, 來測式管內液體是否流動,當液體在管路內沒有流動時, 彈簧將磁鐵往下壓葉片成垂直，此時磁簧開關無動作，接點在常開（NO）位置。

       當管路內有液體流動且液體流量足以將葉片沖高20度~30度時，葉片上方之偏心傳動片將磁鐵往上推，而磁鐵的吸力使磁簧開關動作，此時接點接通（close）由于管徑的不同葉片長度也要隨之改變。

型號參數：

       型 號：FS系列
       材 質：PP加纖維或不銹鋼
       溫 度：-20℃～80℃，－30～250℃
       耐 壓：1.0 MPa可定制
       接點容量：50W/240VAC,200VDC
       開關形式:SPST常開或常閉
       開關使用壽命：≥5百萬次

  *的技術設備，*的生產配置。是現代企業*的條件，也是制造優質產品的保證。飛卓以客戶為導向，以研究和制造客戶需要的、滿意的為已任，把技術研究水平發揮得*。市場的競爭，也就是產品的競爭。
    A first-class technical equipment, first-class pro ductionconfiguration. Is essential for the modern enterprise conditions,Also the manufacturing quality assurance. Phaedra customer-oriented, customers need to research and manufacture Want, satisfaction has been appointed, the technology level of play the mo st incisive. The competition of the market,It is the comp etition of the product.
  
    我們追求的不僅僅是榮譽，更要求客戶的認可。
    We pursue of not only is a honor only,but also request the customer s approbation.

流動開關

產品說明

葉片式流動開關是利用水的流動量帶動葉片來測試管內液體是否流動，當液體在管路內沒有流動時，彈簧將磁鐵往下壓葉片成垂直，此時磁簧開關無動作，接點在常開（NO）位置。當管路內有液體流動且液體流量足以將葉片沖高20-30度時，葉片上方之偏心傳動片將磁鐵往上推，而磁鐵的吸力使磁簧開關動作，此時接點接通（close）由于管徑的不同葉片長度也要隨之改變。簡單可靠的原理使其廣泛應用于測量管道內液體的流動。

Flow Switch

Product Description

Vane type of Flow Switch utilizes the flow rate of water to drive the vane to test whether the liquid in the tube/vessel flows or not.When the liquid in the tube/vessel does not flow, the spring presses the magnet and make the vane vertical, at this moment, the spring switch has no operation, the contact point is at"NO"state. When the liquid flows in the tube/vessel and the flow is big enough to crash the vane higher to 20 to 30 degree, eccentric strap drive above the vane push the magnet upward, suction force of magnet make the magnetic spring switch operate, while the contact point is connected, the length of vane changes due to the diameter of pipe. It is widely used in measuring flow in measuring pipe.