特點 features:
hxd-1000tmc(2005)帶計算機圖像分析處理顯微硬度計,它具有*的電腦自動測量系統,物鏡與壓頭切換時自動轉塔,試樣打定點能精確定位,像質清晰,能自動測量壓痕并顯示硬度值,換算出相對應的洛氏硬度值,能滿足滲碳零件的滲碳層深度的測量和曲線圖、高頻淬火零件的淬硬層深度的測量和曲線圖等要求。該機直觀性強,測量方便,減少了人為誤差,大大提高了測量精度,避免了使用者的視覺疲勞。自96年在國內*推出以來,不斷完善軟件的升級,始終保持產品的地位。
the hxd-1000tmc (2005) micro hardness tester with picture analysis system, it is equipped with computerized measuring system, with auto-motorized turret of precision position. it displays the hv hardness or hk hardness &#118alues. the machine with the friendly menu combining with the convenience-measured way, reduced the artificial error, increase the accuracy of the measurment since 96 years, the latest type has occupied the leading position of the hardness tester in the country.
技術規格 main specifications
型號 type | hxd-1000tmc | | 物鏡/壓頭切換 lens/indenter switch | 自動轉塔切換 with motorized turret | | 試驗力 test force | 9.807, 4.903, 2.942, 1.961, 0.9807, 0.4903, 0.2452, 0.0981 n 1000, 500, 300, 200, 100, 50, 25, 10 gf | | 加荷方式 loading mode | 程控自動加荷,保荷和卸荷 program-controlled application, duration and removal of load | | 保荷時間 duration time | 5 – 60 sec se-lectable, 步長 (in step of ) 5 sec. | | 硬度測量范圍 measuring range | 5 hv – 3000 hv | | 測量顯微鏡 microscope | 物鏡 ob-jective: 40x; 10x(觀察用 for observation only),目鏡 eyepiece: 15x 總倍率 total: 600x; 150x (觀察用 for observation only) | | 顯示器上倍率 magnify on tv | 約 about 1600x | | zui小檢測單位 min. detection | 0.025 µm | | | 測量讀數方式 measuring and reading mode | 計算機自動測量圖像分析,硬度軟件精確修正和梯度圖示。也可目鏡測量。輸出測量數據,采集金相圖像,及硬度梯度圖,并打印和保存 auto measurement, picture analysis, accurate correction, print out or save in files the measured data, image, graphs and layer hardness gradient graph.. | | 操作系統 o s | win2000/xp | | 試件zui大高度 max. test height | 90 mm | | 標準配件,附件 standard attachments | 物鏡ob-jective 40x,10x, 維氏壓頭vickers indenter (在機上built on tester) 標準硬度塊 standard hardness block 薄片夾緊器 sheet specimen clamp 小圓柱體夾緊器 thin cylinder clamp 平口鉗 parallel-jaw vice 打印機(內置) printer (built-in) 計算機(內裝硬度測量軟件) computer with mh software installed 顯示器 tv display, ccd攝像頭camera, 打印機 printer | | 選購件options | 努氏壓頭 knoop indenter 數碼相機及適配鏡 digital camera & adaptor | | 電源 power supply | 220 vac, 50/60 hz | | 尺寸 dimensions | 外包尺寸 主機: main tester: 54 x 50 x 64 cm (packing size) | | 毛重 gross weight | 80 kg |
|