項目ltem | 特性Performance Characteristics | ||||||||||||||||||||||||||||||||||||||||||||||||
使用溫度范圍 Operating Temperature Range | -40to+105℃ | -25to+105℃ | |||||||||||||||||||||||||||||||||||||||||||||||
額定電壓范圍 Rated Voltage Range | 6.3to100VDC | 160to450VDC | |||||||||||||||||||||||||||||||||||||||||||||||
電容量范圍 Capacitance Range | 0.1to15000μF | 0.47to220μF | |||||||||||||||||||||||||||||||||||||||||||||||
電容量允差 Capacitance Tolerance | ±20%(100Hz or 120Hz,+20℃) | ||||||||||||||||||||||||||||||||||||||||||||||||
漏電流Leakage Current (+20℃,zui大max) | I≤0.01CV或3(μA)額定工作電壓充電1分鐘后讀數,取大者 I≤0.01CV or 3(μA)After1minutes,whichever is greater measured with rated working voltage applied | I≤0.03CV+10(μA)額定工作電壓充電1分鐘后讀數, 取大者 I≤0.03CV+10(μA)After 1minutes,whichever is greater measured with rated working voltage applied | |||||||||||||||||||||||||||||||||||||||||||||||
損耗角正切值 Dissipation Factor (tgδ) |
容量>1000μF時,每增加1000μF D.F值增加2%( 100Hz or 120Hz,+20℃) For capacitance1000μF,Add 2%per another 1000μF (100Hz or 120Hz,+20℃) | ||||||||||||||||||||||||||||||||||||||||||||||||
低溫特性 Low Temperature Characteristics (120Hz) | 阻抗比,zui大Impedance ratio ,max
容量>1000μF時,每增加1000μF ,Z - 25℃ / Z+20 ℃值增加0.5%, Z - 40℃ / Z+20 ℃值增加1% Fpr capacitance>1000μF , and 0.5% per another 1000μF for Z-25℃/Z+20℃, add 1% per another 1000μF for Z-40℃/Z+20℃ | ||||||||||||||||||||||||||||||||||||||||||||||||
負荷壽命Load Life | 試驗條件 | Test conditions | |||||||||||||||||||||||||||||||||||||||||||||||
持續時間:2000小時 | Duration time: 2000hours | ||||||||||||||||||||||||||||||||||||||||||||||||
環境溫度:+105℃ | Ambient timperature: +105℃ | ||||||||||||||||||||||||||||||||||||||||||||||||
施加電壓:額定工作電壓(VDC) | Applied voltage: Rated Working Voltage(DVC) | ||||||||||||||||||||||||||||||||||||||||||||||||
試驗后要求:室溫下恢復16小時,+20℃測試 | After test requirements: Resumde 16 hours at normal temperature | ||||||||||||||||||||||||||||||||||||||||||||||||
電容量變化:≤20%規定值 | Capacitance change:≤20% of the initial measured value | ||||||||||||||||||||||||||||||||||||||||||||||||
損耗角正切值:≤200%初始值 | Dissipation Factor:≤200% of the initial specified value | ||||||||||||||||||||||||||||||||||||||||||||||||
漏電流:≤規定值 | Leakage Current:≤The initial specified value | ||||||||||||||||||||||||||||||||||||||||||||||||
儲存壽命Shelt Life | 試驗條件 | Test conditions | |||||||||||||||||||||||||||||||||||||||||||||||
持續時間:1000小時 | Duration time: 1000hours | ||||||||||||||||||||||||||||||||||||||||||||||||
環境溫度:+105℃ | Ambient temperature:+105℃ | ||||||||||||||||||||||||||||||||||||||||||||||||
施加電壓:無 | Applied voltage: None | ||||||||||||||||||||||||||||||||||||||||||||||||
試驗后要求:室溫下恢復16小時,+20℃測試 | After test requirements: Resumed 16 hours at normal timperature | ||||||||||||||||||||||||||||||||||||||||||||||||
電容量變化:≤20%規定值 | Capacitance change:≤20% of the initial measured value | ||||||||||||||||||||||||||||||||||||||||||||||||
損耗角正切值:≤200%初始值 | Dissipation Factor:≤200% of the initial specified value | ||||||||||||||||||||||||||||||||||||||||||||||||
漏電流:≤200%規定值 | Leakage Current:≤200% of the initial specified value |