Auto-Calibration for optimum conditions - Precise control performance and high dynamic response - Easy operation with four key pads and full text graphical LCD - Single and double acting - Low air consumption due to piezo electric microvalve - Pressure regulator built-in to eliminate variations in supply air pressure - Problem-free characteristics on a very small actuator - High resistance against shock and vibration - Mounting on linear actuators according to IEC 534 - Mounting on rotary actuators according to VDI / VDE 3845 | | | - Position transmitter (4...20mA output signal) - Two alarm limits (Min., Max.) - Gauge block with two stainless steel pressure gauges - Remote-transmitter cable ( 3,5,10m) - HART communication (FSK) | | | | RSSL | RSSR | Linear Type | Rotary Type | Single | Double | Single | Double | Input Signal | 4...20mA, 2-wire | Voltage Drop | 8.5V DC @ 20mA (425ℓ) | Min./Max. Current | 3.6mA / 50mA | Air Supply Pressure | 1.4...7.0bar(20...100psi) / filtered compressed dry and non-oiled air | Output Pressure | 0...99% supply air pressure / single or double action | Shut-Off Value | Range 0...5% of position signal | Air Consumption | 0.08N㎥ / h at 1.4bar (20psi) supply | Hummidity Limits | <90% RH,non-condensing | Stroke | Angle | 5..80mm (max. up to 150mm) | 40...90˚(max.up to 100˚) | Adjusted Speed | Range 1...200 (Low 1, High 200) | LCD Indication | 4-digit LCD indicator | Scan Time | 2㎲ | Valve Action | Position 0...99% / Direct action (DA) / Reverse action(RA) | Characteristic Curve | Linear, equal percentage 1:25 of 1:50 Linearity <=0.3% F.S / Sensitivity <=0.2% F.S / Hysteresis <=0.2% F.S | Temperature Limits | Operation : -20...70℃ | Protection Class | IP66 | Case Material | Aluminum diecast | Electrical Connections | 2×G 1/2 or NPT 1/2 | Pneumatic Connections | Rc 14 or NPT 1/4 | Weight (without cable) | 2.3kg / with pressure gauge block | | | |