"GDT" Duct Temperature Sensor is intended for heating, ventilation, air conditioning and other industrial installations for control and receiving reference signals in an air duct system.
- Sensor for Air supplying or distributing
- Limit Sensor (in case of limiting lowest point for air supplying )
- Shift Sensor (in case of revising room temperature depending on outside temperature )
- Measuring sensor ( In case of displaying sensing point or using auto control system for building )

1. On controlling supplying air temperature:
- Install at behind of Fan in case of installing Fan at the last air control unit
- For other case, install at minimum 1.5m away from the last air unit
2. On controlling Distributing air temperature:
- Install always at behind of Fan
3. On using shift sensor for supplying air : Install as possible as near to inside room
4. On controlling Dew point : Install at the right behind of spray trap of Air washer
5. Fix it to the bracket with the bolts
6. Use a shield line which should be separated from power line (AC100/200V)
7. Mounting position:
When the detector has to be mounted on supply duct the detector must be kept between 3 to 8 meters from the humidifier unit. For accurate measurement of the temperature follow recommendation as:
- with steam humidifier; between 5 to 8 meters
- with spray water fogger; between 5 to 8 meters

"GDT" Duct Temperature Sensor is intended for heating, ventilation, air conditioning and other industrial installations for control and receiving reference signals in an air duct system.
- Sensor for Air supplying or distributing
- Limit Sensor (in case of limiting lowest point for air supplying )
- Shift Sensor (in case of revising room temperature depending on outside temperature )
- Measuring sensor ( In case of displaying sensing point or using auto control system for building )