 ACH
| | Model | | | ![]()
| | | Shaft seal(mechanical seal)
S:Standard type | | Stage of pump | | Normal volume(m³/h) | | Pump type | | | |
ACH Series is a horizontal multi-staged pump, and so compacted that it is easy to install in a small space.
This pump can mainly be sued with small machine and tools, house and industrial water pumping.
- cooling and lubricating for machine and tools
- water transferring; light-industrial area, farming warter transfer and circulation
- high pressure; booster for single pump and multi pump
- watering in house |
The major raw material is made stainless steel, and the mechanical seal s FKM so it is very strong about high temperaure and endurance. |
| | Specification | |
| TYPE | ACH2 | ACH4 | | Frequency(Hz) | 50 | 60 | 50 | 60 | | Normal volume(ℓ/min) | 33.3 | 33.3 | 67 | 67 | | Volume range(ℓ/min) | 16~53.8 | 25~67 | 33.3~133 | 43.3~150 | | Max.pressure(bar) | 5.6 | 6.8 | 4.6 | 4.0 | | Motor output(Kw) | 0.37~1.1 | 0.37~1.1 | 0.37~1.1 | 0.55~1.1 | | Temperature(℃) | -10~90 | -10~90 | -10~90 | -10~90 | | Enclosure class | IP54 | IP54 | | Insulation class | F | F | |
| | Pumped liquids | |
The using liquids has to be clean, non-explosive moreover be low viscosity so that it doesn't damage the pump components, without sludge, solid particles and fibers.
If the viscosity and gravity of using liquds is higher than souble cutting water, the motor power has to be increased according to working conditions. |
| | Motor | |
The motor is used standard fan cooling system and standard dimension
Enclosure class : IP54
Insulation class : F
Standard voltage : 50Hz, 3ø 200-220V ,3ø 200-230/380-415V
Standard voltage : 60Hz, 3ø 200-220V ,3ø 200-240/380-440V |
The specific voltage and motor can be produced by usr's order.
The standard starting panel should be connected when using 3ø motor. |
| | External Dimension | | | ACH 2,4 | | | | Dimensions (ACH 2,4 : 3ø 220-240/380-440V 60Hz) | | Pump Type | Motor | Current(A) | Motor
Effeciency
(%) | Dimensions(mm) | Net
weight
(kg) | | Frame NO. | (P2)kW | L1 | L2 | L3 | L4 | B1 | B2 | H | | ACH2-20 | F80S | 0.55 | 2.73-2.50/1.58-1.37 | 73 | 346 | 86 | 74 | 107 | 148 | 123 | 214 | 11.6 | | ACH2-30 | F80M | 0.75 | 3.95-3.62/2.29-1.98 | 74 | 379 | 104 | 92 | 125 | 148 | 123 | 214 | 13.0 | | ACH2-40 | F80L | 1.10 | 4.89-4.48/2.83-2.45 | 80 | 422 | 122 | 110 | 143 | 148 | 123 | 214 | 13.8 | | ACH2-50 | F80L | 1.10 | 4.89-4.48/2.83-2.45 | 80 | 440 | 140 | 128 | 161 | 148 | 123 | 214 | 14.0 | | ACH4-20 | F80M | 0.75 | 3.95-3.62/2.29-1.98 | 74 | 395 | 95 | 83 | 116 | 148 | 123 | 214 | 12.4 | | ACH4-30 | F80L | 1.10 | 4.89-4.48/2.83-2.45 | 80 | 422 | 122 | 110 | 143 | 148 | 123 | 214 | 14.0 | |
| | Sectional drawing ACH2, ACH4 | |
|
| | Part list | |
| NO. | PART NAME | SPEC' | MAT'AL | | 1 | SUCTION CHAMBER | - | GC25 | | 2 | DRAIN PLUG | PT 3/8" | - | | 3 | CHAMBER | - | SUS304 | | 4 | SHAFT | ø12 | SUS304 | | 5 | IMPELLER | - | SUS304 | | 6 | SPACER | - | SUS304 | | 7 | MECHNICAL SEAL | ø16 | Sic+T.C | | 9 | PUMP HEAD | - | GC25 | | 10 | BASE | - | SS41 | | |
智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
