| | | | | | | ![]()
| | | | | | | | | Illuminated Annunciator | | | Unit | | | | | | | | | | | | | | Rating voltage | DC24V,DC110V,DC125V | Voltage variation allowable range | rating voltage 10% | Power consumption | 20mA DC 125V | Signal duration time | above 20ms | Indicator lighting | LED red,green (2 color) | Case Color | Black | Withstand voltage | AC 2,000V/time (50/60Hz) | Ambient temperature | -5 ~+40 ℃ | Relative humuidity | 45 ~ 85% | | | | | | | | | | | | | Condition | Standard state | Emergency occurrence | Continuous emergency | Acknow-ledgement | Alam return | Obstacle removal | Lamp return | Input signal | | | | | | | | Alarm signal | | | | | | | | LED | | | | | | | | | | | | | | | | | | | Please use this device together with Bell, Buzzer alarm circuit, Emergency occurrence | | | input signal drives RY by F product selects BL(Bell) LED : Red, BZ(Buzzer) LED : Green | | | by selective switch and uses as signal source of alarm circuit and inform lighting | | | emergency occurred part to emergency indication window. | | | Even after alarm circuit returns after confirming emergency stage, lighting continues | | | to be maintained in relevant indication window. As terminal no. 2. is self-holding | | | circuit after complete acton on emergency occured part if OFF signal is authorized | | | lighting release, it retruns to initial stage. | | | ¡Ø Note) - | | | In YSAN 1 type, since alarm output time is 20ms, delay realy is necessary separately. | | | | | | | | | Please make panel hole with the insertion dimensions of 43.5mm of width and 33.5mm of length. | | | As for unit, please remove cover of front illuminating side, take lens out, stick to | | | panel and then tighten bolts inside of unit front under the pushed state from top to downward. | | | If no problem found after checking the attachment state, the attachment is completed with fitting lens and | | | cover. | | | |