智能制造網>產品庫>物聯網>傳感器>溫濕度傳感器>>GOH-420 GOH-110 GOHO-420戶外用濕度變送器

GOH-420 GOH-110 GOHO-420戶外用濕度變送器

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱中山市泰倫特電子科技有限公司
品牌
型號
所在地中山市
廠商性質經銷商
更新時間2024/10/29 10:01:01
訪問次數79

產品標簽:

在線詢價收藏產品點擊查看電話

聯系我們時請說明是智能制造網 上看到的信息，謝謝!

索取相關資料

公司介紹主營產品

中山市泰倫特電子科技有限公司代理韓國工控工業自控元器件、儀器儀表、開關按鈕、HANYOUNG(韓榮電子)  AUTONICS（奧托尼克斯） KOINO建興  KACON(凱昆) YONGSUNG (韓國龍聲) METRONIX DAEYANG(大洋)QLIGHT(可萊特-警報燈) HEDSS（海德）WOONYOUNG(云永)  DAEYANG(大洋電機) 、EOCR(三和) 、POWNIX(普力士) 、LG 、METRONIX(脈超尼斯)、PATLITE（派特萊）WERMA(偉馬快德)EOCR(韓國三和電機保護器) TEND(天得電機) FOTEK(陽明工控) MOUJEN(中國臺灣茂仁)  SUNX(日本神視)  SICK(德國施克)  韓國MENICS  韓國KONICS  美國HONEYWELL(霍尼韋爾)  LG低壓電器  SAMYOUNG(韓國三榮)  SUNGHO(韓國成浩)  SUNKWAN(韓國鮮光)  FOX(DAESUNG韓國大成)  韓國FAS、  DongA(東亞機電)  Daeil大一  CHANTO(中國臺灣長拓)  日本SMC氣動  中國臺灣HIWIN直線導軌  法國高諾斯(Crouzet)  日本和泉(IDEC)  德國P+F倍加福(PEPPERL+FUCHS)  中國臺灣ANLY(安良機電)  中國臺灣SAMD(山電電機)  HIBOX(韓國海博開關盒/接線盒)ELECSON（韓星）電壓、電流、功率、頻率數顯表、計數器、計米器、時間繼電器，轉速表，線速度表、溫控表、接近開關 光電開關，旋轉編碼器、光纖開關、液位控制器、按鈕開關、指示燈、光字牌開關、急停開關、選擇開關、微動開關、行程開關、多層信號燈,警示燈,層燈，塔燈,旋轉報警燈、蜂鳴器、保險絲座、接線端子、腳踏開關、天車開關、凸輪開關、十字組合開關、開關盒等、中間繼電器固態繼電器、功率調節器、腳踏控制器，腳踏調速器電子踏板黃玲
智能機電保護器D3-PRO系列溫控范圍 -10-50(℃)工作電流二次電流5安(A)工作電壓 AC220V- +10%或110V- +10%(其它電壓可向本公司咨詢)(V)接線方式二次回路外形尺寸 WXHXD 180X110X75.7(mm)重量 1kg(包括D3-PRO及MCT)
中山市泰倫特電子科技有限公司是韓國三和（EOCR）株式會社在中國地區的代理公司，主要銷售機電保護器:
•  EOCR-4F智能過電流繼電器
•  EOCR-SP1/SP2智能過電流繼電器
•  EGR接地保護繼電器
•  EOCR-3MS/FMS智能過電流繼電器
•  EOCR-FD智能過電流繼電器
•  EOCR-3DS智能過電流繼電器
•  零序電流互感器ZCT
•  EVR-FD電壓繼電器
•  EVR電壓繼電器
•  EUCR-3C欠電流繼電器
•  EOCR-DS(T)固態過電流繼電器
•  EOCR-1P固態過電流繼電器
•  EOCR-SE2固態過電流繼電器
•  EOCR-AR固態過電流繼電器
•  EOCR-DS1/DS2/DS3智能過電流繼電器
•  EOCR-SS1/SS2智能過電流繼電器
•  EOCR-3MZ/FMZ智能過電流繼電器
•  EOCR-3DM/FDM智能過電流繼電器
•  EOCR-3DZ智能過電流繼電器
•  EOCR-3DD智能過電流繼電器
•  電流互感器CT
•  EVR-PD電壓繼電器
•  EUCR欠電流繼電器
•  EOCR-4E固態過電流繼電器
•  EOCR-SP固態過電流繼電器
•  EOCR-ST固態過電流繼電器
•  EOCR-SE固態過電流繼電器
•  EOCR-SS固態過電流繼電器

展開顯示更多內容

• EOCR-4E固態過電流繼電器 • EOCR-SP固態過電流繼電器• EOCR-ST固態過電流繼電器• EOCR-SE固態過電流繼電器
• EOCR-SS固態過電流繼電器

產品簡介在線詢價

GOH-420 GOH-110 GOHO-420戶外用濕度變送器

GOH-420 GOH-110 GOHO-420戶外用濕度變送器產品信息

OUTSIDE HUMIDITY TRANSMITTER(GOH-420)

"GOH" Outside Humidity Transmitters are intended for an electronic Humidity Transmitter to measure the outside Relative Humidity (RH) and convert the measurement into an electric signal.

This unit can be used with all system equipments that can receive output signals 4 ~ 20mA DC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which
varies electrical capacity depending on circumstantial relative humidity
Electronic sensing circuit varies signal into 4 ~ 20mA DC ( within 0 ~ 99% relative humidity )
Sensing Accuracy is ±3% within usable range of 20 ~ 90% Rh

SUPPLY VOLTAGE	: 24V AC/DC ±20%

FREQUENCY	: 50 or 60㎐
SENSING ELEMENT	: Integrated Circuity

POWER CONSUMPTION	: 0.35VA

SENSING RANGE	: 0 ~ 99% Rh

ACCURACY	: 20°C at 20~90%Rh with in ±3%Rh

OUTPUT SIGNAL	: 4 ~ 20mA DC

SENSING TIME	: Apprx. 20 sec.


AMBIENT TEMPERATURE	: 1) On Operation : -35 ~ +80℃ 2) On Transportation & Storage : -25 ~ +65°C

AMBIENT HUMIDITY	: 1) On Operation : below 99%Rh 2) On Transportation & Storage : below 95% Rh

WIRING	: wires, 1.0㎟ or Shield Cable

WEIGHT	: 0.06Kg

HOUSING	: plastic case
PROTECTION CLASS	: IP 30

The element must not be touched and should be protected from dust, water, spray and condensation.
The sensor element must not be exposed to organic solvents, sylphid bearing materials.
Select a location approx 1.5 meter above the floor.
The sensor location should also be reasonably clean and free from damp and condensation.
Fix with the bolts provided in pull box ( 50×100, 100×100 )
To avoid the conductive current the wires should be separated from power lines.
Use the shield line when wiring

OUTSIDE HUMIDITY TRANSMITTER(GOH-110)

"GOH" Outside Humidity Transmitters are intended for an electronic Humidity Transmitter to measure the outside Relative Humidity (RH) and convert the measurement into an electric signal.

This unit can be used with all system equipments that can receive output signals 0 ~ 10V DC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which
varies electrical capacity depending on circumstantial relative humidity
Electronic sensing circuit varies signal into 0 ~ 10V DC ( within 0 ~ 99% relative humidity )
Sensing Accuracy is ±3% within usable range of 20 ~ 90% Rh

SUPPLY VOLTAGE	: 24V AC/DC ±20%

FREQUENCY	: 50 or 60㎐
SENSING ELEMENT	: Integrated Circuity

POWER CONSUMPTION	: 0.35VA

SENSING RANGE	: 0 ~ 99% Rh

ACCURACY	: 20°C at 20~90%Rh with in ±3%Rh

OUTPUT SIGNAL	: 0 ~ 10V DC( 0 ~ 1V DC)

SENSING TIME	: Apprx. 20 sec


AMBIENT TEMPERATURE	: 1) On Operation : -35 ~ +80℃ 2) On Transportation & Storage : -25 ~ +65°C

AMBIENT HUMIDITY	: 1) On Operation : below 99%Rh 2) On Transportation & Storage : below 95% Rh

WIRING	: wires, 1.0㎟ or Shield Cable

WEIGHT	: 0.06Kg

HOUSING	: plastic case
PROTECTION CLASS	: IP 30

OUTSIDE HUMIDITY TRANSMITTER(GOHO-420)

“GOHO” Outside Air Humidity Transmitter is intended for installing at the place of Heating, Ventilation facilities specially at the place needed to be pleasantness, and used for sensing humidity of outside air possible to be used by connecting with central control system.

SUPPLY VOLTAGE	: 15 ~ 30V DC

OUTPUT SIGNAL	: 4 ~ 20 mA

POWER CONSUMPTION	: 0.35VA

SENSING RANGE	: 0 ~ 99% Rh
SENSING ELEMENT	: Integrated Circuity

ACCURACY	: 20°C at 20~90%Rh with in ±3%Rh
WIRING	: 2 Wire


SENSING TIME	: 1 minapprx.


AMBIENT TEMPERATURE	: 1) On Operation : -30 ~ +70℃ 2) On Transportation & Storage : -20 ~ +50°C

AMBIENT HUMIDITY	: 1) On Operation : below 99%Rh 2) On Transportation & Storage : below 95% Rh


WEIGHT	: 0.08Kg

PROTECTION CLASS	: IP 30

Install Location : Inside wall of good air ventilating place
Prohibited Location : Inside corner, shelves, behind curtain or nearby reverse side of heat source.
- Keep away from direct light and the end of wire tube of Sensor should be shielded to protect.
any error from ventilating air coming through wire tube
Calibration : As adjusted on delivery from factory, do not change voluntarily