 | PROPORTIONAL DIGITAL TEMPERATURE CONTROLLER(GDRT-1100) | | | | The GDRT-1100 is a microprocessor based wall mounted roportional integral(PI) temperature controller for controlling fan coil unit heating and cooling applications. | | It has a large and clear LCD display which is both aesthetic in design and user friendly in operation. | | | - Microprocessor based
- Ultra slim design
- Large user friendly LCD 3 digit display with back light
- Optional remote sensor terminals
- Very simple installation
- Integrated termination module with room display in one unit
- Universal mounting |
| | The controller provides an analogue 0 ..10 VDC output for controlling motorized or thermal actuator.
Simultaneously there are two triac outputs for controlling 3 point floating actuator.
A startup delay will reset the actuator to close position.
▶Sensor:
- Temperature sensor : NTC 10KΩ
- A trimpot is provided under the front bezel for final caliberation of the sensor
▶Display :
- Press ON/OFF button on the right
- The LCD display the actual room temperature, the unit in ˚C, valve position %
ａnd heat/cool icon.
▶Operation :
- The left button is provided for changing the operation modes of the temperature controller
- The set point can be changed by pressing the add(TOP) or subtract(BOTTOM) button
- Leaving the buttons untouch for 5 seconds will revert the LCD to temperature
display mode
- Switch off by the ON/OFF button, the valve automatically closes.
| | | Supply Voltage | : 24VAC 50/60 Hz ±15% | | | Power consumption | : 2 VA | | | Ambient Temperature | : 0 to 50˚C | | | Storage Temperature | : -40 ~ 50˚C | | | Ambient Humidity | : Max 85% RH | | | Protection Class | : IP20 | | | Housing | : Flame retardent plastic, porcelain white | | | Dimensions | : 86mm x 86mm x 11.7mm / LCD Module
55mm x 50mm x 24mm / termination module | | | Input | : sensor type : 10K Thermistor (NTC), ±0.5˚C | | | Outputs | : 0...10V DC, 5 mA and/or 2 triac floating outputs simultaneously | | | Setting | : 1) Setpoint : 10 to 30˚C
2) Default setpoint : 23˚C
3) Default mode : cooling
4) PI parameter : Auto | |
| | In case of installing on Panel, make the hole for 9 mm (diameter) first.
Unscrew the nut of potentiometer axis, fix axis to the hole from inside to outside of Panel.
Attach Setting Knob to axis on 0 (zero) point setting. Power source is AC 24V.
In case of using several actuators combination, it's preferable to decide capacity of transformer after collecting each Actuator's power consumption | | PROPORTIONAL DIGITAL TEMPERATURE CONTROLLER(GDRT-ONF) | | | “ GDRT-ONF” utilize digital control technology with LCD display
showing the following information all the time ;
- Working status ( cool or heat )
- Fan speed
- Room temperature
- Temperature set-point | | Three-speed fan control ( Auto/Manual )
Built-in temperature sensor | | Set point Range : 5°C to 35°C
Operating difference : ± 1°C
Switch Current Rating : < 2A
Operating Voltage : AC 220V, 50Hz
Display : LCD
Housing : ABS Flame Retardant
Dimension : 86 x 86 x 13 mm | | | |
智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
