The DN-100 has designed specifically to operate with strain gauge sensors such as Fast - measurement of Loadcell, Pressure Transducer, LVDT, etc,. The setup sequence is simple and quick using four push buttons only. Calibration mode : real-weight (standard weight) or rated output (mV/V) Comparison function : contact signal of Hi, Low. Hold function sample hod, Peak hod, Interal Peak hold. - DN100 : samplimg speed : Appr. 5000 Times Per Second - DN200 : sampling speed : Appr. 100 Times Per Second
| Specifications | DN100 & DN200 | Temperature storage | -10℃ ~ 85℃ | Temperature operating | 0℃ ~ 60℃ | Relay output | AC 125V 0.5A DC30V 1A | Transducer excitation | 5, 10V DC | Type of inputs accepted | 1~4mV/V, (0 ~ ±10V, 4 ~20mA) | Transducer current drive | 120mA | Calibration method | Front panel switches | Full scale output | 0~5V or 10VDC | Low pass filter | 10Hz, 100Hz, 1KHz | Temperature drift | 0.02% FS/℃ (1mv/v Input) | Sampling speed | DN100 : Appr.50000Times Per Second DN200 : Appr.100Times Per Second | Characters displayed | 5 digits | Typical accuracy | +/- 0.02% | Polarity indicator | Yes | Decimal point selection | Push button setup | Display size | 15 & 10mm | Resolution max. | ±32599 | Type | 7segment LED | Input/Output connector | Push Button | Weight | 1000g | Mounting | Panel mounting | Size | 96 x 96 (mm) | Power Requirements | AC 110V/220V , 50/60㎐ | Option | Analog output Auto zero(DAC) 4Relay output ( Hh, Hi, Lo, Li) RS232c , RS485, BCD, 4~20mA | | | |