아날로그 신호 입력기(KCAI)
통신신호 변환기(KCCC)
카운터 신호 입력기(KCCI)
복합신호 입력기(KCDA)
인터넷 커플링(KCDE)
디지털 신호 입력기(KCDI)
디지털 신호 출력기(KCDO)
디지털 신호 전력 집합기(KCPM)
무선제어기(KCSC)
디지털 신호 표시기(KDMA)

Transducer傳感器

DIGITAL SIGNAL INPUT MODULE / KCDI Type
Source
Input Voltage
Number of Input points
AC 90~260V, DC 85~145V
OFF Decided voltage DC 0~4V
ON Decided voltage DC 6~12V
16Point(8Point/1Common, 8Point/1Common)
Introduction
It is the device which transmits the status of
On/Off (close/open) of Various relays/Switches,
etc. to Serial communication when the high level
HOST, which is connected to RS-485
communication, requests the information.
General Specifications
COUNTER INPUT MODULE / KCCI Type
Common Matter
Communication Specifications
Introduction
It is the device which counts the On/ Off
(Close/Open) displacement of digital contact
(prox. switches, rotary encoder, contact output of
transducers, etc.), and transmits the counted data
to high level HOST via RS-485 communication.
General Specifications
ANALOGUE INPUT UNIT MODULE / KCAI Type
Source
Input
Output
Input Channel No.
Accuracy
Source
Input
Maximum count
Number of maximum input
AC 90~260V, DC 85~ 145V
4~20mA
Number of unipolar binary 12 bit input channel(0~4095)
8Channel/Unit(1Common)
within (0.5%+2digit)
AC 90~260V, DC 85~ 145V
OFF Decision Voltage DC 0~4V
ON Decision Voltage DC 6~12V
999,999
4
Source
Input / Output
Transmission speed
Transmission distance
Number of maximum
low level contacts
AC 90~260V, DC 85~ 145V
High level : Being TCP/IP (Lan) it depends on the
program provided by the manufacturer
low level : RS-485(Serial)
High level : 10Mbps, 100Mbps maximum 300m
low level : 9600bps maximum 1.2km
32
Protocol
Interface
Transmission type
Maximum transmission distance
Transmission speed
Character composition (data format)
Communication identifying method
Melsec or Modbus RTU
RS-485 Multi Drop 2Wire(Twist pare)
Half-duplex start-stop synchronous type
within 1.2
9600 bps(Standard), 19200 bps
Start 1bit, Data 8bits, Stop 1bit, Parity None
Mormal operation on Rx, Tx LED OFF
Introduction
It is the device which transmits DC current and
voltage, which is the analog signals from transducers,
to high level HOST via RS-485 communication.
General Specifications(Input/Output)
DIGITAL OUTPUT UNIT MODULE / KCDO Type
Source
Input
Output
Number of
Input points
AC 90~260V, DC 85~ 145V
RS-485 Serial Signal
Relay AContact Output
(Max.AC 125V/600mA
DC 110V/600mA, DC 3V/3A)
8Point(8Common)
Source
Input
Output
Number of
Input points
DC 24V 10%
RS-485 Serial Signal
Open Collector
(Max.DC 24V/50mA)
16Point(1Common)
Introduction
It is the device which changes RS-485
communication signals from the high level HOST
via Serial communication to Relay or Open
Collector On/Off signals by using built-in control
circuit of the output machine.
General Specifications
(KCDO-08) (KCDO-16)
INTERNET COUPLING / KCDE Type
Introduction
It makes it possible for internet monitoring and
remote control of the devices mounted on the site.
For the internet monitoring, both fixed IP or
flexible IP (DHCP) is available.
General Specifications
Input / Output
Transmission speed
Transmission distance
Number of maximum low
level contacts
High level: RS-232(Serial)
low level : RS-485(Serial)
Maximum 38400bps
High level:within 15m,low level:within 1.2km
32
RS-232/RS-485 CONVERTER / KCCC Type
Introduction
It provides intermediating function by changing RS-
485 communication signals from the devices mou
nted on the site to the RS-232C signals recognized by
the computer.
General Specifications
DIGITAL/ANALOGUE INPUT MODULE / KCDA Type
Source
Input
/Output
Item
Analogue
Input
(Temp.
measuring)
Contact Input
Contact Output
Standard
Input : Temp. sensor Pt 100
digital display type : Signal Integer
Accuracy : 1%, Channel No. : 2Channel
Measuring range : -10 ~ 100
On Decided voltage : DC 6~12V Off Decided voltage : DC 0~4V
Channel No. : 8Channel(1Common)
Output : Relay A,BContact Channel No. : 4Channel(4Common)
AC 90~260V, DC 85~ 145V
Introduction
It is the device which is composed of 2EA of analog signal
input (Temp.), 8EA of digital signal contact input (status),
ａnd 4EA of digital signal output (control), and it
communicates with high level HOST via RS-485
communication.
General Specifications
POWER SIGNAL COMMUNICATION / KCPM Type
Source
Input
AC 90~260V,
DC 85~ 145V, 5VA
Line voltage 10~500V
Ampere 0.1~6A
Power Factor 0.5~1.0(lag )
Accuracy
V : (0.5% of FS+1digit)
A : (0.5% of FS+2digit)
W : (0.5% of FS+2digit)
var : (1.5% of FS+2digit)
PF : (3% of FS+2digit)
Hz : (0.1% of rdg+2digit)
Unit : mm
Introduction
It is the device which transmits 3 voltage, 3
current, electric power, Power Factor, frequency,
the amount of reactive power, the amount of
reactive power to high level HOST via RS-485
communication (it is the same device with our KDX).
General Specifications
DIMENSIONS
TYPE
L Type
LL Type
W H D
105 60 86
157 60 86
TYPE
KCCC
KCPM
W H D
54 22 67
150 120 75