DUCT TEMPERATURE CONTROLLER(GDC-1100) | | | "GDC" Proportional Duct temperature Controller is intended to control Duct temperature steadily. Operating Voltage : AC 24V Heating and Cooling exchanging function Built-in temperature transmitter method ( Pt1000 ) Control Output Signal : 0 ~ 10V DC
| | Heating : | When the switch is at heating point, Valve is to open in case of duct temperature is lower than setting value. | Cooling : | When the switch is at cooling point, Valve is to open in case of duct temperature is higher than setting value. |
| | POWER SUPPLY | : 24V AC.± 20% | | FREQUENCY | : 50 or 60Hz | | POWER CONSUMPTION | : 0.5VA | | CONTROL RANGE | : 0 ~ 50℃ | | CONTROL SIGNAL | : 0 ~10V DC. | | SENSING ELEMENT | : Pt1000Ω | | AMBENT TEMP & HUMI | :1) On Operation : at ?15 ~ 80℃, below 95% RH 2) On Transportation : at ?15 ~ 70°C, below 95%RH | | PROTECTION CLASS | : IP54 | | WEIGHT | : 0.5Kg(W/BRACKET) | |
| | This unit is designed for P-control. Based on the differences between detected temperature and pre-set value, this controller gives out put signal within 0~10V DC A variable is from 0 to 99% A variable is to control signal by means of mutual-proportion relation.
| | l Mode transition switch is built in for heating and air-conditioning. Desired Temperature can be set by turning the rotary knob located at the front of the controller.
| | |