騰達試驗儀器廠：

　　微機控制靜載錨固試驗機是**檢測儀器，專用鋼絞線、靜載錨固強度試驗之用。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。

　　The steel strａnd static load anchoring tester is a testing instrument for special steel strａnd and static load anchor strength testing.Be sure to read the instructions carefully before use.It is operated by**experimental personnel to avoid injury caused by improper operation.For more information,please contact our customer service staff.

　　微機控制靜載錨固試驗機采用微機控制電液伺服加載和手動液壓加載，主體與控制柜分置的設計，液壓加荷有微機顯示計算儲存功能打印數據報告。大大降低了故障率。采用進口比例閥，穩定性高，加荷速度平穩。WINDDOWS版操作軟件簡單易用，十分鐘學會。

　　The steel strａnd static load anchoring tester uses microcomputer to control electro-hydraulic servo loading and manual hydraulic loading.The main body is separated from the control cabinet.The hydraulic loading has a microcomputer display calculation storage function to print data reports.Greatly reduced the failure rate.Imported proportional valve,high stability and stable loading speed.WINDDOWS version of the operating software is simple and easy to use,learn in ten minutes.

　　微機控制靜載錨固試驗機技術參數：

　　■A大試驗力：6500KN

　　■測力范圍：4%-A（全程不分檔，等效三檔）

　　■示值準確度（試驗力）：伏于示值的±1%

　　■位移測量范圍：0-200mm

　　■示值準確度（位移）：±1%

　　■重復性：±0.5%

　　■相對分辨率：±0.5%

　　■活塞行程：200mm

　　■拉伸間距：3400mm

　　■功率：4.4KW

　　■外形尺寸：主機：5030×700×2060mm

　　控制柜1180×800×1310mm

　　■凈重：3500Kg

　　Technical parameters of steel strａnd static load anchoring tester

　　■A large test force:6500KN

　　■Measuring range:4%-A(the whole process is not divided,equivalent to the third gear)

　　■Accuracy of displayed value(test force):±1%of the indicated value

　　■Displacement measurement range:0-200mm

　　■Indication accuracy(displacement):±1%

　　■Repeatability:±0.5%

　　■Relative resolution:±0.5%

　　■Piston stroke:200mm

　　■Stretching distance:3400mm

　　■Power:4.4KW

　　■Dimensions:Host:5030×700×2060mm

　　Control cabinet 1180×800×1310mm

　　■Net weight:3500Kg

　　微機控制靜載錨固試驗機結構：

　　該臥式靜載錨固機由主機和控制柜（含油源、泵站）及微機控制系統三部分組成。

　　■主機：由負荷傳感器、機架、吊架、吊梁、圍板、千斤頂及墊板、錨板、錨具等組成。其中錨板、錨具及墊板隨做不同的試驗根數而更換不同的錨板和錨具。

　　■控制柜：由控制面板、電機泵、送油閥、回油閥、截止閥、電磁換向閥、電液伺服數字閥、管路、油箱等系統構成，主要實現對油缸（千斤頂）、活塞啟動、后退、停止、壓力大小、速度快慢的控制。

　　■微機控制電液測控系統見后。

　　Steel strａnd static load anchoring tester structure

　　The horizontal static load anchoring machine is composed of three parts:main machine and control cabinet(including oil source and pump station)ａnd microcomputer control system.

　　■Main machine:It consists of load sensor,frame,hanger,hanging beam,fence,jack and pad,anchor plate,anchorage,etc.Among them,the anchor plate,the anchorage and the backing plate are replaced with different anchor plates and anchorages according to the number of tests.

　　■Control cabinet:It consists of control panel,motor pump,oil delivery valve,oil return valve,shut-off valve,electromagnetic reversing valve,electro-hydraulic servo digital valve,pipeline,fuel tank and other systems.Start,back,stop,pressure level,speed control.

　　■Microcomputer control electro-hydraulic measurement and control system see later.