騰達試驗儀器廠：

　　建筑保溫材料燃燒性能檢測裝置是專業檢測儀器，適用于判定建筑材料是否具有可燃性的試驗方法。使用前務必仔細閱讀說明書。并由專業實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。

　　The building material flammability test furnace is a professional testing instrument and is suitable for testing methods for determining whether a building material is flammable.Be sure to read the instructions carefully before use.It is operated by professional experimenters to avoid injury caused by improper operation.For more information,please contact our customer service staff.

　　建筑保溫材料燃燒性能檢測裝置適用標準：

　　GB8626-2007《建筑材料可燃性試驗方法》

　　GB/T1080L2-2002《絕熱用擠塑聚苯乙烯泡沫塑料（XPS）》

　　Standard for the flammability test furnace of building materials:

　　GB8626-2007"Test method for flammability of building materials"

　　GB/T1080L2-2002"Extrusion extruded polystyrene foam(XPS)"

　　建筑保溫材料燃燒性能檢測裝置技術參數：

　　★箱體高度700×400×600mm

　　★試樣尺寸250×90mm

　　★試件A大厚度60mm

　　★燃燒器噴嘴孔徑φ0.17mm

　　★外型尺寸：700mm×400mm×810mm

　　★重量：50kg

　　Technical parameters of building materials flammability test furnace:

　　★Box height 700×400×600mm

　　★sample size 250×90mm

　　★test piece A large thickness 60mm

　　★burner nozzle apertureφ0.17mm

　　★Outer size:700mm×400mm×810mm

　　★Weight:50kg

　　建筑保溫材料燃燒性能檢測裝置特點：

　　★該裝置的箱體采用不銹鋼板（δ1.5mm）彎彎制而成，其造型美觀、線條清晰，★具有耐腐蝕抗老化特點。

　　★該建筑保溫材料燃燒性能檢測裝置裝置中燃燒器配備測量火焰標尺，燃燒器火焰調節方便、靈活、準確。

　　★試件夾按標準所規定的結構，嚴格制做，試件裝夾，速度快、燃燒效果好

　　建筑保溫材料燃燒性能檢測裝置結構及安裝

　　★結構

　　該試驗儀由燃燒試驗箱、燃燒器、試驗支架、調節閥等幾部分組成。液化氣（丙烷）罐自備

　　★安裝

　　將底座放入箱體內，固定套、試樣架等按圖示安裝好。將燃燒器放在試樣前。燃燒器拉桿從箱體外箱體內擰在燃燒器底座上。將丙烷表與液化氣罐連接上，將調節閥與丙烷表的另一端用塑料管連接好，用氣動管將調節閥與燃燒器連接起來。

　　Building materials flammability test furnace features:

　　★The box of the device is made of stainless steel plate(δ1.5mm),which is beautiful in appearance and clear in line.★It has corrosion resistance and aging resistance.

　　★The burning device of the building insulation material burning performance detecting device is equipped with a measuring flame scale,ａnd the burner flame adjustment is convenient,flexible and accurate.

　　★The specimen clamp is strictly prepared according to the structure stipulated by the standard.The specimen is clamped,the speed is fast,ａnd the combustion effect is good.

　　Building materials flammability test furnace structure and installation

　　★Structure

　　The tester consists of a combustion test chamber,a burner,a test stand,a regulating valve and the like.Liquefied gas(propane)tanks are provided

　　★Installation

　　Put the base into the box,fix the sleeve,sample holder,etc.as shown in the figure.Place the burner in front of the specimen.The burner rod is screwed from the outer casing of the casing to the burner base.Connect the propane meter to the liquefied gas tank,connect the regulating valve to the other end of the propane meter with a plastic tube,ａnd connect the regulating valve to the burner with a pneumatic tube.

　　建筑保溫材料燃燒性能檢測裝置試驗操作

　　★選用合適的點火定位器，放在燃燒器頂端。

　　★試樣放在試樣夾內，掛上。

　　★燃燒器接近試樣對好位置后，把底板上直尺鎖緊定位。

　　★將濾紙放在鋁箔制的收集盤內，放在試件下方。

　　★將燃燒器立起，打開調壓閥旋鈕，用電子點火器在噴嘴上點火，逐漸調節火焰長度至20mm左右，將燃燒器傾斜45度，按照標準要求的距離給試樣點火

　　Building material flammability test furnace test device test operation

　　★Use a suitable ignition positioner and place it on top of the burner.

　　★Place the sample in the sample holder and hang it.

　　★After the burner is close to the sample,lock the ruler on the bottom plate.

　　★Place the filter paper in the collection tray made of aluminum foil and place it under the test piece.

　　★Raise the burner,open the pressure regulating valve knob,ignite the nozzle with an electronic igniter,gradually adjust the flame length to about 20mm,tilt the burner 45 degrees,ａnd ignite the sample according to the standard required distance.