送紙部分采用抽紙皮帶進行底部抽紙，去除離合控制方式。以此實現不停機連續加紙，間斷式皮帶輸送采用伺服控制，根據紙張長短可調整間斷輸送長短，多條輸送皮帶都裝有齒輪和齒條裝置，可調整皮帶的左右位置。

The paper feed part adopts the paper belt to draw paper at the bottom to remove the clutch control mode.To achieve non-stop continuous sheet, intermittent type belt conveyor adopts servo control, adjust continuous conveyor length, according to the length of the paper is more than conveying belt is equipped with gear and rack device, adjustable strap around the place

印膠部分采用柔性模版印膠，模版形狀可根據產品需要刻制。安裝模版的輥刻有基準線，安裝模版需準確、方便、快捷，印膠左右位置可隨意調整，前后位置調整采用正位調整器調整，可不停機調整印膠的前后左右位置。

The printing part adopts the flexible template printing glue, the template shape can be made according to the product needs.Installation template roll engraved with baseline, template to be accurate, convenient, fast, about the rubber position can be adjusted freely, before and after the position adjustment adopts is a regulator, adjust position around the rubber can not stop.

貼膜部分采用伺服調速裝置，由電腦直接輸入調整，能保證不停機調整膜的長短。采用輥刀自動裁切膜的長短；自動壓出膜的鋸齒線，自動分切膜的開口，采用吸氣管輥將膜吸貼到紙盒上，可不停機調整膜前后左右位置。

The tape part adopts the servo speed control device, which can be adjusted directly by the computer to guarantee the length of the film.Using roller cutter to automatically cut the length of the film;Automatically press the serrated line of the film, automatically cut the opening of the film, and apply the suction pipe roller to attach the film to the carton.

加工示意圖Processing diagram：

配置單Single configuration：