冷熱沖擊試驗機，用來測試材料結構或復合材料，在瞬間下經溫及極低溫的連續環境下所能忍受

的程度，藉以在最短時間內試驗其熱脹冷縮所引起的化學變化或物理傷害。適用的對象包括理電池、

金屬、塑料、橡膠、電子”二等材料，可作為其產品改進的依據或參考。

Cold & thermal impact tester is used to test the capability of material structure or composite materials to withstand

the continuous environmental changes between extremely high temperature and low temperatures during a short

period, and therefore understａnd the chemical changes or physical damages caused by expansion from heat and

contraction from cold in the shortest possible time. It is applicable to Lithium-ion battery,metals, plastic, rubber,

electronics amongst other， Lithium-ion battery. The test result can be used as a reference or basis for product

improvement.

特點Features

.三箱設備區分為:高溫區、低溫區、測試區三部分，測試產品置于測試區，沖擊時高溫區的溫度沖壓入測試去進行沖擊，測試產品為靜態式。

.采用觸控式圖控澡作介面。操作筒易。

.沖擊方式應用風路切換方式將溫度導入測試區，做冷熱沖擊洲試。

.高溫沖擊或低濕沖擊時，時間可達999H,循環周期可達9999次。

.系統可作自動循環衙移或手動選擇性沖擊并可設定二區或三區沖擊及冷沖熱沖啟始。

.冷卻采二元冷凍系統，降濕效果快速，冷卻方式為水冷式。

.可以試驗沖擊常溫

Divided into three areas:high temperature,low temperature, the three-part test area,  testing products placed on the

test,when the impact of high temperature or cold temperatures into the area of impact testing area

Using touch-control graph control as operation interface, easy to operate.

Applying wind route conversion to the shock method to distribute temperature to the testing zone for cold and thermal

shock measurement.

For high temperature shock or low temperature shock,ma x i mum time is up to 999H,ａnd maximum circulation cycles

are 9999 times.

The system can be used fo r automatic Circulation Shock or manual selective shock, capable of setting two zones or

three zones shocks as well as cold and thermal shock start-up.

Binary cooling system is adopted for cooling,with quick cooling effect.The method is water cooling.

Normal temperature shocd test is allowed.

技術參數