智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
本公司8月16號09點35分報道：TCSL-29型差示掃描量熱儀使用注意事項@技術文獻
產品簡介
YI、TCSL-29型差示掃描量熱儀產品概述：
YI、TCSL-29型差示掃描量熱儀產品概述：
TCSL-29型差示掃描量熱儀應用范圍有：對材料氧化誘導時間的測定，高分子材料的固化反應溫度和熱效應、物質相變溫度及其熱效應測定、高聚物材料的結晶、熔融溫度及其熱效應測定、高聚物材料的玻璃化轉變溫度等。實驗對象為：固態、液態、粘稠試樣，除了氣體。將試樣和參比物分別放入坩堝，置于爐中進行程序加熱，改變試樣和參比物的溫度。若參比物和試樣的熱容相同，試樣又無熱效應時，則二者的溫差近乎為“零”，此時得到一條平滑的曲線。隨著溫度的增加，試樣產生了熱效應，而參比物未產生熱效應，二者之間就產生了溫差，在DTA曲線中表現為峰，溫差越大，峰也越大，溫差變化次數越多，峰的數目也越多。峰頂向上的峰稱為放熱峰，峰頂向下的峰稱為吸熱峰。
TCSL-29 type differential scanning calorimeter product overview:
The application range of CTSL-29 differential scanning calorimeter includes: the determination of oxidation induction time of materials, curing reaction temperature and thermal effect of polymer materials, the determination of phase change temperature and its thermal effect of materials, the determination of crystallization, melting temperature and its thermal effect of polymer materials, the glass transition temperature of polymer materials, etc. The experimental subjects are: solid, liquid and viscous samples, except for gases. The sample and the reference substance were put into a crucible and placed in a furnace for program heating to change the temperature of the sample and the reference substance. If the heat capacity of the reference material and the sample is the same, and the sample has no thermal effect, then the temperature difference between the two is almost "zero", and a smooth curve is obtained. With the increase of temperature, the sample produces a thermal effect, while the reference substance does not, and the temperature difference between the two produces a peak, which is shown in the DTA curve. The greater the temperature difference, the larger the peak, the more the temperature difference changes, and the more the number of peaks. Peaks with upward peaks are called exothermic peaks and peaks with downward peaks are called endothermic peaks.
產品特點
二、TCSL-29型差示掃描量熱儀主要特點：
二、TCSL-29型差示掃描量熱儀主要特點：
1、quanxin的爐體結構，更好的解析度和分辨率以及基線穩定性；
2、數字式氣體質量流量計，準確控制吹掃氣體流量，數據直接記錄在數據庫中；
3、儀器可采用雙向控制（主機控制、軟件控制），界面友好，操作簡便。
TCSL-29 type differential scanning calorimeter main features:
1, new furnace structure, better resolution and resolution and baseline stability;
2, digital gas mass flowmeter, accurate control of purge gas flow, data directly recorded in the database;
3, the instrument can be used two-way control (host control, software control), friendly interface, easy to operate.
技術參數
三、TCSL-29型差示掃描量熱儀技術參數：
三、TCSL-29型差示掃描量熱儀技術參數：
量程：0～±500mW
溫度范圍：室溫~800℃，風冷
升溫速率：1~80℃/min
溫度分辨率：0.1℃
溫度波動：±0.1℃
溫度重復性：±0.1℃
噪聲：0.01μW
解析度：0.01μW
準確度：0.1μW
靈敏度：0.1μW
控溫方式：升溫、恒溫（全程序自動控制）
曲線掃描：升溫掃描
氣氛控制：儀器自動切換
數據接口：標準USB接口
儀器標準：配有標準物質（錫），用戶可自行矯正溫度和熱焓
所有技術指標可根據用戶需求調整
TCSL-29 type differential scanning calorimeter technical parameters:
Range: 0 ~ ±500mW
Temperature range: room temperature ~800℃, air cooled
Heating rate: 1~80℃/min
Temperature resolution: 0.1℃
Temperature fluctuation: ±0.1℃
Temperature repeatability: ±0.1℃
Noise: 0.01 mu W
Resolution: 0.01μW
Accuracy: 0.1μW
Sensitivity: 0.1μW
Temperature control mode: temperature rise, constant temperature (full program automatic control)
Curve scan: heating scan
Atmosphere control: automatic switch of instrument
Data interface: standard USB interface
Instrument standard: equipped with standard material (tin), the user can correct the temperature and enthalpy
All technical indicators can be adjusted according to user requirements
主營產品：土工檢測儀器,防水材料檢測儀器,陶瓷磚檢測儀器,水利水電粗粒土系列,瀝青儀器檢測儀器
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy and hydropower coarse-grained soil series, asphalt testing instrument
