風機調節閥廣泛適用于建材、玻璃、礦山、電力、輕工、造紙等行業的風機入口及通風管道,與風機配套使用,對管路中流量根據工況的不同需要進行調節,以滿足管道工藝運行的需要。
This valve is widely used at the venting pipe and air-blower inlet in building material, glass, mining, power, light industry and papermaking departments. It is equipped with air-blower to adjust flow in pipe by the different working conditions and meet the demand of pipe technology operation.
結構特點:
Structure characteristic:
風機調節閥設計新穎、結構合理,調節板采用多葉、多軸式,使氣流均勻分流,流阻小,啟閉力矩小,動作靈活可靠,各傳動部位采用潤滑軸承,運轉靈活,摩擦系數小調節輕松自如,能有效地控制氣體流量,穩定風機的輸出曲線,充分利用能源使工作系統達到狀態,是各種風管系統中理想的調節設備。
The valve has the features of novel design and compact structure. Its regulating disc adopts multi-blade and multi-axle, which can shunt airflow. Flow resistance and open-close torque is little and operation is reliable. The lubricating bearing of transmission part is flexible on operation and handy of regulating with little coefficient of friction. It can control the airflow effectively and stabilize the output curve of air-blower and make the working system in optimal state by making full use of energy. It is the ideal regulating device in all kinds of air piping system.
性能參數:
Performance parameter:
公稱壓力 Nominal pressure | 介質流速 Medium velocity | 泄漏率 Leakage ratio | 適用溫度 Suitable temperature | 適用介質 Suitable medium |
0.05MPa | ≤20m/s | ≤1.5% | ≤300℃ | 空氣、粉塵氣體等 Air, gas with powder etc |