智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
HSNH940-42三螺桿泵、HSN系列螺桿泵報價
如果您對三螺桿泵的安裝尺寸、性能參數，以及產品的參考價格，有疑問可以隨時我公司的，我們將在*時間為您提供您所需要產品的相關信息：
：hstmby01
：程曉
:
HSNH系列三螺桿油泵概述
The HSNH series three screw pump overview three screw pump features and advantages:
三螺桿泵特點及優點：
（1）HSNH三螺桿油泵的壓力和流量范圍寬闊，流量范圍0.2～580m3/hzui高工作壓力可達4MPa；
（1） HSNH three screw pump a wide range of pressure and flow, the flow range of 0.2 ~ 580m3/h maximum workingpressure up to 4MPa;
（2）HSNH循環油泵輸送送液體的種類和粘度范圍寬廣,粘度范圍3mm2/s-760mm2/s；
（2） HSNH circulation pump for the conveyance of liquid type and a wide range of viscosity, viscosity in the range of3mm2/s-760mm2/s;
（3）因?yàn)镠SNH三螺桿泵內的回轉部件慣性力較低，故可使用很高的轉速；
（3） because of the rotary inertia force components HSNH three screw pump is low, it can use very high speed;
（4）HSNH液壓油泵吸入性能好，具有很強的自吸能力；
（4） HSNH hydraulic oil pump suction performance is good, has a strong self absorption capacity;
（5）HSNH螺桿供油泵流量均勻連續，振動小，噪音低，幾乎沒有脈動；
（5） HSNH screw pump flow is uniform and continuous, little vibration, low noise, almost no pulse;
（6）HSNH三螺桿泵組結構堅實，安裝方便有（臥式、立式、法蘭式、插裝式）保養容易；
（6） HSNH three screw pump solid structure, convenient installation （horizontal, vertical, flange type, plug-in） easy maintenance;
（7）HSNH三螺桿泵具有很強的耐熱性，一般工作溫度是（1~250°C）超過此溫度要在訂貨時說明，我們將為您定做金屬波紋管密封耐高溫系列三螺桿泵；
（7） HSNH three screw pump has a very strong heat resistance, the general working temperature （1~250 ° C） over this temperature to indicate in order, we will for your custom metal bellows seal of high temperature resistant series three screw pump;
（8）HSNH稀油潤滑站用三螺桿泵可根據所輸送介質需要還可提供加熱或冷卻結構；
（8） HSNH thin oil lubrication station with three screw pump according to the transmission medium to provide heating or cooling structure;
（9）HSNH液壓油泵三螺桿泵幾乎沒有磨損，三螺桿泵只要選型正確，使用的壽命是很長的。
（9） the HSNH hydraulic pump three screw pump almost no wear, three screw pump as long as the selection of the right, the use of life is very long.
（10）HSNH液壓站配套用三螺桿泵的工作效率高。
（10） HSNH hydraulic station matching with the three screw pump with high efficiency.
HSN, HSNH, HSNF, HSNH系列三螺桿泵,螺桿泵電機組
一、概述 One, overview
HSN 系列三螺桿泵適于輸送燃料油、潤滑油、液壓油等油類和具有潤滑性的液體。所輸介質中不得含有任何磨料顆粒和對泵材料有腐蝕的物質。
HSN series three screw pump for delivery of fuel oil, lubricating oil, hydraulic oil and other oils and lubricating liquid.The transmission medium not containing any material abrasive particles and the corrosion of pump material.
HSN系列三螺桿泵在燃油系統中用作輸送、增壓及燃油爐的燃油泵；在輸油系統中用作傳輸及加油泵；在一切工業領域中皆可用作潤滑油泵；用于各種液壓傳動裝置中的液壓泵。適用壓力范圍：4.0Mpa，溫度≤150℃、粘度3-760cst.
HSN series three screw pump is used as the fuel pump, turbocharger and fuel furnace in the fuel system; used fortransmission and pumps in the oil system; in all industrial fields are used as lubricating oil pump; hydraulic pump forvarious hydraulic transmission device in the. The applicable pressure range: 4.0Mpa, temperature ≤ 150 ℃,viscosity of 3-760cst.
二、結構特點 Structural characteristics
HSN系列三螺桿泵由特殊型線構成的螺旋面的主動螺桿轉動時，其動密封腔室將把液體由吸入口吸入并沿軸向連續、無脈動的輸送到排出口。主桿采用液壓平衡，從桿的軸向力支撐在后蓋上，并由液壓力驅動旋轉，因而螺桿型面僅傳遞液壓扭矩，并不受力，也無磨損，對全部傳動零件而言，均由被輸送介質潤滑。主桿的徑向由平衡活塞定位，且借助于平衡活塞和軸套的間隙使高壓腔和密封腔分開，在密封腔內裝有機械密封，腔內的油液回油孔與泵的吸入腔相通，因而不受排出壓力的影響。由于部件通用組合系列化有多種結構，可用于臥式（H），法蘭式（F）和立式（S）安裝。
Rotation of the spiral surface of HSN series three screw pump is composed of special type line consisting of active screw, the dynamic seal chamber will bring the liquid from the suction port of the suction along the axial direction and no pulsation continuous, transported to the outlet. The main rod adopts the hydraulic pressure balance, from the axial force rod support on the rear lid, and by the hydraulic pressure drive rotation, so screw type only transferof hydraulic torque, no stress, no wear, for all the transmission parts, all by the transported medium lubrication.The main rod radial by balancing piston position, and by the clearance between the piston and sleeve balance that high pressure chamber and separate the sealing cavity, with the mechanical seal cavity, cavity of the oil return holeand pump suction cavity, so it is not affected by the discharge pressure. Because the components of combinationseries has a variety of structure, can be used for horizontal （H）, flange type （F） and vertical （S） installation.
根據所輸送介質需要還可提供加熱或冷卻結構。
According to the transmission medium to provide heating or cooling structure.
公 司 名稱： | 黃山天曼泵業有限公司 |
姓名： | 程曉 （銷售 ） （） |
辦 公 地址： | 中國 黃山市徽州區城北工業園 |
郵 編： | 245400 |
電 話： | 86- |
傳 真： | 86- |
移 動 ： | |
郵 箱： | Hstmby01 |
： |
|
阿 里 旺旺: | 旺旺：hstmby01 |
公司主頁： | http;//www.hstmby。。ｃｏｍhttp://www.luogb。。ｃｏｍ http://www。。ｃｎtmby。。ｃｏｍhttp://www.tm-p.cc |
Company name: Mount Huangshan teamon pump industry limited company
Contact person: Mr. Cheng Xiao （Sales Manager） （）
Office address: China Huangshan City Huizhou area north of the City Industrial Park
Postal Code: 245400
86-
86-
phone:
: Hstmby01
: :
A: I want to: hstmby01
Company homepage: http; //www.hstmby。。ｃｏｍhttp://www.luogb。。ｃｏｍ
http://www。。ｃｎtmby。。ｃｏｍhttp://www.tm-p.cc
